PDA

View Full Version : Thinkpad T520 LAN PCI Half Mini Network card not recognised



trowling
26-Dec-2011, 11:36
Hi

I am trying to install my copy of SUSE 11 SP1 on my new Thinkpad T520
The Thinkpad has Windows 7 already on it, so I am trying to dual boot
it.

My copy of SUSe 11 SP1 installs fine, but when I try and configure the
network, it says that it "cannot configure the network card because the
kernel device (eth0, wlan0) is not present"

The Windows 7 configuration is as follows:
Network card: Wireless LAN PCI Express Half Mini Card Adapter
Driver: Realtek Semiconductor Corp


I also noticed that it does not seem to recognize the Video Card which
again in Windows 7 displays as a
"Intel HD Graphics Family"

Therefore it will not allow use of advanced graphics i.e. the fancy
cube etc ...

Please advise how I can at least get SUSE 11 SP1 to recognise the
network card?

Regards


--
trowling
------------------------------------------------------------------------
trowling's Profile: http://forums.novell.com/member.php?userid=105610
View this thread: http://forums.novell.com/showthread.php?t=450024

malcolmlewis
26-Dec-2011, 16:33
On Mon, 26 Dec 2011 10:36:01 GMT
trowling <trowling@no-mx.forums.novell.com> wrote:

>
> Hi
>
> I am trying to install my copy of SUSE 11 SP1 on my new Thinkpad T520
> The Thinkpad has Windows 7 already on it, so I am trying to dual boot
> it.
>
> My copy of SUSe 11 SP1 installs fine, but when I try and configure the
> network, it says that it "cannot configure the network card because
> the kernel device (eth0, wlan0) is not present"
>
> The Windows 7 configuration is as follows:
> Network card: Wireless LAN PCI Express Half Mini Card Adapter
> Driver: Realtek Semiconductor Corp
>
>
> I also noticed that it does not seem to recognize the Video Card which
> again in Windows 7 displays as a
> "Intel HD Graphics Family"
>
> Therefore it will not allow use of advanced graphics i.e. the fancy
> cube etc ...
>
> Please advise how I can at least get SUSE 11 SP1 to recognise the
> network card?
>
> Regards
>
>
Hi
More than likely the kernel driver is not present for the 2.6.x kernel.

Can you provide the output from the follow command (just for your wlan
device)


lspci -nnk


--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 3 days 12:37, 3 users, load average: 0.02, 0.04, 0.05
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

trowling
27-Dec-2011, 10:36
Thanks for responding

The output is as follows:


lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM
Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Device
[8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point
HECI Controller #1 [8086:1c3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Device
[8086:1502] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
Enhanced Host Controller #2 [8086:1c2d] (rev 04)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
Definition Audio Controller [8086:1c20] (rev 04)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 1 [8086:1c10] (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 2 [8086:1c12] (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 4 [8086:1c16] (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
Root Port 5 [8086:1c18] (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
Enhanced Host Controller #1 [8086:1c26] (rev 04)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC
Controller [8086:1c4f] (rev 04)
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port
SATA AHCI Controller [8086:1c03] (rev 0


--
trowling
------------------------------------------------------------------------
trowling's Profile: http://forums.novell.com/member.php?userid=105610
View this thread: http://forums.novell.com/showthread.php?t=450024

malcolmlewis
27-Dec-2011, 17:44
On Tue, 27 Dec 2011 09:36:02 GMT
trowling <trowling@no-mx.forums.novell.com> wrote:

>
> Thanks for responding
>
> The output is as follows:
>
>
> lspci -nnk
> 00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM
> Controller [8086:0104] (rev 09)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Device
> [8086:0116] (rev 09)
> 00:16.0 Communication controller [0780]: Intel Corporation Cougar
> Point HECI Controller #1 [8086:1c3a] (rev 04)
> 00:19.0 Ethernet controller [0200]: Intel Corporation Device
> [8086:1502] (rev 04)
> 00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
> Enhanced Host Controller #2 [8086:1c2d] (rev 04)
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
> 00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
> Definition Audio Controller [8086:1c20] (rev 04)
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
> 00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
> Root Port 1 [8086:1c10] (rev b4)
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
> Root Port 2 [8086:1c12] (rev b4)
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
> Root Port 4 [8086:1c16] (rev b4)
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express
> Root Port 5 [8086:1c18] (rev b4)
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB
> Enhanced Host Controller #1 [8086:1c26] (rev 04)
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
> 00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC
> Controller [8086:1c4f] (rev 04)
> Kernel modules: iTCO_wdt
> 00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port
> SATA AHCI Controller [8086:1c03] (rev 0
>
>
Hi
I don't see a wireless device in the list above, can you look through
the output from the command;


dmesg |less

Is there any reference to the wireless device, there may also be an
entry requesting firmware?

Can you also install rfkill (as root user);


zypper in rfkill
rfkill list


--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 15:38, 3 users, load average: 0.09, 0.06, 0.20
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

trowling
28-Dec-2011, 14:06
Malcolm

There is nothing in the dmesg that I can see relating to a Wireless Lan
or wlan or whatever ...

I cannot install rfkill
When I try to as su I get the following error:

Loading repository data...
Reading installed packages...
'rfkill' not found.
Resolving package dependencies...

Nothing to do.


I googled the problem and found something about the Laptop having a
Wireless LAN Half Mini Card adapter that the OS cannot recognise?
... which sounds correct as the operating system continually tells me
that it is unable to configure the network card because the kernel
device (eth0, wlan0) is not present

I stronglu suspect that it is the Half Mini format of the wireless LAN
card that's causing the problem.
Not sure if SUSE/ Novell have a fix for this ... maybe a SP2 or 3 or 4
or whatever perhaps ??

Regards,


--
trowling
------------------------------------------------------------------------
trowling's Profile: http://forums.novell.com/member.php?userid=105610
View this thread: http://forums.novell.com/showthread.php?t=450024

malcolmlewis
28-Dec-2011, 16:13
On Wed, 28 Dec 2011 13:06:02 GMT
trowling <trowling@no-mx.forums.novell.com> wrote:

>
> Malcolm
>
> There is nothing in the dmesg that I can see relating to a Wireless
> Lan or wlan or whatever ...
>
> I cannot install rfkill
> When I try to as su I get the following error:
>
> Loading repository data...
> Reading installed packages...
> 'rfkill' not found.
> Resolving package dependencies...
>
> Nothing to do.
>
>
> I googled the problem and found something about the Laptop having a
> Wireless LAN Half Mini Card adapter that the OS cannot recognise?
> .. which sounds correct as the operating system continually tells me
> that it is unable to configure the network card because the kernel
> device (eth0, wlan0) is not present
>
> I stronglu suspect that it is the Half Mini format of the wireless LAN
> card that's causing the problem.
> Not sure if SUSE/ Novell have a fix for this ... maybe a SP2 or 3 or
> 4 or whatever perhaps ??
>
> Regards,
>
>
Hi
Can you try an openSUSE LiveCD of GNOME (just runs from the CD) from
here;
http://software.opensuse.org/121/en

If it recognizes the device, can you post the output from the above
commands.

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 1 day 14:45, 3 users, load average: 1.04, 1.05, 0.90
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

trowling
29-Dec-2011, 07:46
Hi again ....

Well I downloaded the copy of Open SUSE 12.1 and burned it onto a DVD
and installed it on my Laptop
It installed OK and left the Windows 7 rubbish on the drive also ... in
dual boot mode

I configured the network for a static IP Address and connected to my
router no problems.
Loaded up Firefox and went straight to opensuse.org ...


So what do I have here?
What is the difference between my old SLED 11 SP1 and this OpenSuse
12.1?
Do I have to pay for this version?
Can I get the spinning 3D cube working on this version? ... and how? ..
I've tried but can't see it anywhere obvious.

... Yes I know the 3D cube is rather dull to most of the guru Linux
set, but hey I like it.
That's one of the reasons I bought SLED in the first place because I
saw it on an IBM bods machine in a tutorial and thought it was exclusive
to SLED.
(Only found out later that it is apparantely available in Ubantu also)

As my old copy of SLED 11 is now out of the 12 month support mode and I
don't know if I have to pay another $50 to get the latest version, or if
the latest version of SLED will work like this version does ... I'm
somewhat confused ..
(Note: As a Lotus Notes programmer who has to work full time in a
Windows environment, you can probably tell that I'm not overly
knowledgeable about Linux, I try to install and play on my holidays etc
... I'd really like to get a Notes development environment up and
running on Linux some day ... that's my immediate reason for the playing
with this stuff ... )



The dump of dmesg is below ... 4yi
(Note: The rfkill command still did not work)

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1.2-desktop (geeko@buildhost) (gcc
version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011
(187dde0)
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009d800
(usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000da99f000
(usable)
[ 0.000000] BIOS-e820: 00000000da99f000 - 00000000dae9f000
(reserved)
[ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000dafff000 - 00000000db000000
(usable)
[ 0.000000] BIOS-e820: 00000000db000000 - 00000000dfa00000
(reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000ffd20000 - 0000000100000000
(reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000019e600000
(usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 4239CTO/4239CTO, BIOS 8AET49WW (1.29 )
07/11/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x19e600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FE0000000 write-back
[ 0.000000] 7 base 19F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 19E800000 mask FFF800000 uncachable
[ 0.000000] 9 base 19E600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new
0x7010600070106
[ 0.000000] e820 update range: 00000000db000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01200000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @
11f6000-1200000
[ 0.000000] RAMDISK: 7f6de000 - 7fff3000
[ 0.000000] Allocated new RAMDISK: 368e9000 - 371fd325
[ 0.000000] Move RAMDISK from 000000007f6de000 - 000000007fff2324 to
368e9000 - 371fd324
[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT daffe120 000A4 (v01 LENOVO TP-8A 00001290
PTEC 00000002)
[ 0.000000] ACPI: FACP dafe9000 000F4 (v04 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: DSDT dafec000 0DFE6 (v01 LENOVO TP-8A 00001290
INTL 20061109)
[ 0.000000] ACPI: FACS daf2d000 00040
[ 0.000000] ACPI: SLIC daffd000 00176 (v01 LENOVO TP-8A 00001290
PTEC 00000001)
[ 0.000000] ACPI: SSDT daffc000 00249 (v01 LENOVO TP-SSDT2 00000200
INTL 20061109)
[ 0.000000] ACPI: SSDT daffb000 00033 (v01 LENOVO TP-SSDT1 00000100
INTL 20061109)
[ 0.000000] ACPI: SSDT daffa000 00797 (v01 LENOVO SataAhci 00001000
INTL 20061109)
[ 0.000000] ACPI: HPET dafe8000 00038 (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: APIC dafe7000 00098 (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: MCFG dafe6000 0003C (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: ECDT dafe5000 00052 (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: ASF! dafeb000 000A5 (v32 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: TCPA dafe4000 00032 (v02 PTL LENOVO 06040000
LNVO 00000001)
[ 0.000000] ACPI: SSDT dafe3000 009A3 (v01 PmRef Cpu0Ist 00003000
INTL 20061109)
[ 0.000000] ACPI: SSDT dafe2000 00996 (v01 PmRef CpuPm 00003000
INTL 20061109)
[ 0.000000] ACPI: UEFI dafe1000 0003E (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: UEFI dafe0000 00042 (v01 PTL COMBUF 00000001
PTL 00000001)
[ 0.000000] ACPI: UEFI dafdf000 0027E (v01 LENOVO TP-8A 00001290
PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000019e600000
[ 0.000000] node 0 pfn: [0 - 19e600]
[ 0.000000] remap_alloc: node 0 [19b200000-19e600000) ->
[f3400000-f6800000)
[ 0.000000] Initmem setup node 0 0000000000000000-000000019e600000
[ 0.000000] NODE_DATA [0000000033400000 - 0000000033401fff]
(remapped)
[ 0.000000] 5748MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Node: 0, start_pfn: 10, end_pfn: 9d
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 10
[ 0.000000] Node: 0, start_pfn: 100, end_pfn: da99f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 100 4100 8100 c100 10100 14100 18100 1c100 20100 24100
28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100
58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100
88100 8c100 90100 94100 98100 9c100 a0100 a4100 a8100 ac100 b0100 b4100
b8100 bc100 c0100 c4100 c8100 cc100 d0100 d4100 d8100
[ 0.000000] Node: 0, start_pfn: dafff, end_pfn: db000
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] dafff
[ 0.000000] Node: 0, start_pfn: 100000, end_pfn: 19e600
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 100000 104000 108000 10c000 110000 114000 118000
11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000
144000 148000 14c000 150000 154000 158000 15c000 160000 164000 168000
16c000 170000 174000 178000 17c000 180000 184000 188000 18c000 190000
194000 198000 19c000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x0019e600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000da99f
[ 0.000000] 0: 0x000dafff -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0019e600
[ 0.000000] On node 0 totalpages: 1543981
[ 0.000000] free_area_init_node: node 0, pgdat f3400000,
node_mem_map f3402200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 11497 pages used for memmap
[ 0.000000] HighMem zone: 1306809 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap:
dfa00000:18600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f3200000 s30144 r0 d23104
u262144
[ 0.000000] pcpu-alloc: s30144 r0 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1530720
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line:
root=/dev/disk/by-id/ata-ST9500420AS_5VJDMDBT-part6
resume=/dev/disk/by-id/ata-ST9500420AS_5VJDMDBT-part5 splash=silent
quiet showopts vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 27156224 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000371fe:0019e600)
[ 0.000000] Memory: 6021672k/6789120k available (5184k kernel code,
101004k reserved, 3873k data, 488k init, 5219976k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc0ad9000 - 0xc0b53000 ( 488 kB)
[ 0.000000] .data : 0xc071038c - 0xc0ad8a80 (3873 kB)
[ 0.000000] .text : 0xc0200000 - 0xc071038c (5184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f140a000 soft=f140c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.001000] Fast TSC calibration using PIT
[ 0.002000] Detected 2292.407 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4584.81 BogoMIPS (lpj=2292407)
[ 0.000013] pid_max: default: 32768 minimum: 301
[ 0.000092] Security Framework initialized
[ 0.000123] AppArmor: AppArmor initialized
[ 0.000247] Mount-cache hash table entries: 512
[ 0.000501] Initializing cgroup subsys cpuacct
[ 0.000515] Initializing cgroup subsys memory
[ 0.000537] Initializing cgroup subsys devices
[ 0.000542] Initializing cgroup subsys freezer
[ 0.000546] Initializing cgroup subsys net_cls
[ 0.000550] Initializing cgroup subsys blkio
[ 0.000566] Initializing cgroup subsys perf_event
[ 0.000631] Disabled fast string operations
[ 0.000636] CPU: Physical Processor ID: 0
[ 0.000640] CPU: Processor Core ID: 0
[ 0.000653] mce: CPU supports 7 MCE banks
[ 0.000677] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.000689] using mwait in idle threads.
[ 0.003117] ACPI: Core revision 20110623
[ 0.030772] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.031186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041186] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping
07
[ 0.142997] Performance Events: PEBS fmt1+, SandyBridge events,
Intel PMU driver.
[ 0.143012] ... version: 3
[ 0.143015] ... bit width: 48
[ 0.143019] ... generic registers: 4
[ 0.143023] ... value mask: 0000ffffffffffff
[ 0.143027] ... max period: 000000007fffffff
[ 0.143030] ... fixed-purpose events: 3
[ 0.143034] ... event mask: 000000070000000f
[ 0.152618] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160002] CPU 1 irqstacks, hard=f154e000 soft=f1550000
[ 0.160007] Booting Node 0, Processors #1
[ 0.160013] smpboot cpu 1: start_ip = 99000
[ 0.170766] Initializing CPU#1
[ 0.230880] Disabled fast string operations
[ 0.230916] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.251086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.256863] CPU 2 irqstacks, hard=f1584000 soft=f1586000
[ 0.256869] #2
[ 0.256872] smpboot cpu 2: start_ip = 99000
[ 0.267640] Initializing CPU#2
[ 0.327722] Disabled fast string operations
[ 0.327755] CPU2: Thermal LVT vector (0xfa) already installed
[ 0.347889] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.353700] CPU 3 irqstacks, hard=f159c000 soft=f159e000
[ 0.353705] #3
[ 0.353708] smpboot cpu 3: start_ip = 99000
[ 0.364476] Initializing CPU#3
[ 0.424565] Disabled fast string operations
[ 0.424596] CPU3: Thermal LVT vector (0xfa) already installed
[ 0.444727] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.446517] Brought up 4 CPUs
[ 0.446523] Total of 4 processors activated (18338.71 BogoMIPS).
[ 0.452904] devtmpfs: initialized
[ 0.453316] PM: Registering ACPI NVS region at dae9f000 (1048576
bytes)
[ 0.453820] print_constraints: dummy:
[ 0.453876] RTC time: 15:32:54, date: 12/29/11
[ 0.454000] NET: Registered protocol family 16
[ 0.454558] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.454565] ACPI: bus type pci registered
[ 0.455080] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.455088] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820
[ 0.455092] PCI: Using MMCONFIG for extended config space
[ 0.455097] PCI: Using configuration type 1 for base access
[ 0.458081] bio: create slab <bio-0> at 0
[ 0.458311] ACPI: Added _OSI(Module Device)
[ 0.458317] ACPI: Added _OSI(Processor Device)
[ 0.458322] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.458328] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.464719] ACPI: EC: EC description table is found, configuring
boot EC
[ 0.486348] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.502243] ACPI: SSDT dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001
INTL 20061109)
[ 0.503959] ACPI: Dynamic OEM Table Load:
[ 0.503967] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001
INTL 20061109)
[ 0.507650] ACPI: SSDT dae8da98 00303 (v01 PmRef ApIst 00003000
INTL 20061109)
[ 0.509540] ACPI: Dynamic OEM Table Load:
[ 0.509547] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000
INTL 20061109)
[ 0.512784] ACPI: SSDT dae8bd98 00119 (v01 PmRef ApCst 00003000
INTL 20061109)
[ 0.514460] ACPI: Dynamic OEM Table Load:
[ 0.514467] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000
INTL 20061109)
[ 0.518966] ACPI: Interpreter enabled
[ 0.518978] ACPI: (supports S0 S3 S4 S5)
[ 0.519047] ACPI: Using IOAPIC for interrupt routing
[ 0.530470] ACPI: Power Resource [PUBS] (on)
[ 0.540501] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data =
0x62
[ 0.543037] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.543043] HEST: Table not found.
[ 0.543051] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.543535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.543702] pci_root PNP0A08:00: host bridge window [io
0x0000-0x0cf7]
[ 0.543708] pci_root PNP0A08:00: host bridge window [io
0x0d00-0xffff]
[ 0.543714] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.543723] pci_root PNP0A08:00: host bridge window [mem
0xdfa00000-0xfebfffff]
[ 0.543729] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed4bfff]
[ 0.543762] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.543857] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 0.543888] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff
64bit]
[ 0.543907] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.543921] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
[ 0.544055] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.544106] pci 0000:00:16.0: reg 10: [mem 0xf2625000-0xf262500f
64bit]
[ 0.544241] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.544251] pci 0000:00:16.0: PME# disabled
[ 0.544326] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 0.544381] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
[ 0.544403] pci 0000:00:19.0: reg 14: [mem 0xf262b000-0xf262bfff]
[ 0.544425] pci 0000:00:19.0: reg 18: [io 0x6080-0x609f]
[ 0.544550] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.544560] pci 0000:00:19.0: PME# disabled
[ 0.544617] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.544663] pci 0000:00:1a.0: reg 10: [mem 0xf262a000-0xf262a3ff]
[ 0.544821] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.544830] pci 0000:00:1a.0: PME# disabled
[ 0.544889] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.544928] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff
64bit]
[ 0.545068] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.545078] pci 0000:00:1b.0: PME# disabled
[ 0.545131] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.545276] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.545285] pci 0000:00:1c.0: PME# disabled
[ 0.545342] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.545493] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.545502] pci 0000:00:1c.1: PME# disabled
[ 0.545561] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.545707] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.545716] pci 0000:00:1c.3: PME# disabled
[ 0.545773] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.545919] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.545928] pci 0000:00:1c.4: PME# disabled
[ 0.545998] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.546044] pci 0000:00:1d.0: reg 10: [mem 0xf2629000-0xf26293ff]
[ 0.546203] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.546212] pci 0000:00:1d.0: PME# disabled
[ 0.546263] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 0.546499] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.546551] pci 0000:00:1f.2: reg 10: [io 0x60a8-0x60af]
[ 0.546574] pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf]
[ 0.546596] pci 0000:00:1f.2: reg 18: [io 0x60a0-0x60a7]
[ 0.546617] pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb]
[ 0.546639] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
[ 0.546661] pci 0000:00:1f.2: reg 24: [mem 0xf2628000-0xf26287ff]
[ 0.546750] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.546759] pci 0000:00:1f.2: PME# disabled
[ 0.546805] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.546845] pci 0000:00:1f.3: reg 10: [mem 0xf2624000-0xf26240ff
64bit]
[ 0.546901] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.547066] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.547231] pci 0000:03:00.0: [10ec:8176] type 0 class 0x000280
[ 0.547269] pci 0000:03:00.0: reg 10: [io 0x5000-0x50ff]
[ 0.547333] pci 0000:03:00.0: reg 18: [mem 0xf2500000-0xf2503fff
64bit]
[ 0.547483] pci 0000:03:00.0: supports D1 D2
[ 0.547488] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.547499] pci 0000:03:00.0: PME# disabled
[ 0.547574] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.547584] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.547594] pci 0000:00:1c.1: bridge window [mem
0xf2500000-0xf25fffff]
[ 0.547708] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.547718] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.547727] pci 0000:00:1c.3: bridge window [mem
0xf1d00000-0xf24fffff]
[ 0.547743] pci 0000:00:1c.3: bridge window [mem
0xf0400000-0xf0bfffff 64bit pref]
[ 0.547890] pci 0000:0d:00.0: [1180:e823] type 0 class 0x000880
[ 0.547931] pci 0000:0d:00.0: reg 10: [mem 0xf1401000-0xf14010ff]
[ 0.548144] pci 0000:0d:00.0: supports D1 D2
[ 0.548148] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.548159] pci 0000:0d:00.0: PME# disabled
[ 0.548249] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[ 0.548286] pci 0000:0d:00.3: reg 10: [mem 0xf1400000-0xf14007ff]
[ 0.548504] pci 0000:0d:00.3: supports D1 D2
[ 0.548509] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.548520] pci 0000:0d:00.3: PME# disabled
[ 0.548599] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.548608] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.548618] pci 0000:00:1c.4: bridge window [mem
0xf1400000-0xf1cfffff]
[ 0.548633] pci 0000:00:1c.4: bridge window [mem
0xf0c00000-0xf13fffff 64bit pref]
[ 0.548686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.549107] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP1._PRT]
[ 0.549221] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP2._PRT]
[ 0.549332] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP4._PRT]
[ 0.549467] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP5._PRT]
[ 0.550057] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.550820] pci0000:00: ACPI _OSC request failed (AE_SUPPORT),
returned control mask: 0x0d
[ 0.550825] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.560226] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.560426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.560612] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.560790] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.560966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.561143] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.561318] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.561503] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.561738] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.561763] vgaarb: loaded
[ 0.561767] vgaarb: bridge control possible 0000:00:02.0
[ 0.562222] SCSI subsystem initialized
[ 0.562349] libata version 3.00 loaded.
[ 0.562478] usbcore: registered new interface driver usbfs
[ 0.562521] usbcore: registered new interface driver hub
[ 0.562595] usbcore: registered new device driver usb
[ 0.562780] PCI: Using ACPI for IRQ routing
[ 0.566990] PCI: pci_cache_line_size set to 64 bytes
[ 0.567150] reserve RAM buffer: 000000000009d800 - 000000000009ffff

[ 0.567157] reserve RAM buffer: 00000000da99f000 - 00000000dbffffff

[ 0.567166] reserve RAM buffer: 00000000db000000 - 00000000dbffffff

[ 0.567171] reserve RAM buffer: 000000019e600000 - 000000019fffffff

[ 0.567431] NetLabel: Initializing
[ 0.567436] NetLabel: domain hash size = 128
[ 0.567439] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.567465] NetLabel: unlabeled traffic allowed by default
[ 0.567481] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.567498] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.569548] Switching to clocksource hpet
[ 0.570325] Switched to NOHz mode on CPU #0
[ 0.570501] Switched to NOHz mode on CPU #3
[ 0.570507] Switched to NOHz mode on CPU #2
[ 0.570536] Switched to NOHz mode on CPU #1
[ 0.576288] AppArmor: AppArmor Filesystem Enabled
[ 0.576335] pnp: PnP ACPI init
[ 0.576364] ACPI: bus type pnp registered
[ 0.577825] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.577832] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.577837] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.577842] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.577847] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.577852] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.577857] pnp 00:00: [mem 0x000d4000-0x000d7fff]
[ 0.577862] pnp 00:00: [mem 0x000d8000-0x000dbfff]
[ 0.577867] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.577872] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.577877] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.577885] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.577890] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.577895] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.577901] pnp 00:00: [mem 0x00100000-0xdf9fffff]
[ 0.577906] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.577911] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.578054] system 00:00: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.578062] system 00:00: [mem 0x000c0000-0x000c3fff] could not be
reserved
[ 0.578069] system 00:00: [mem 0x000c4000-0x000c7fff] could not be
reserved
[ 0.578075] system 00:00: [mem 0x000c8000-0x000cbfff] has been
reserved
[ 0.578082] system 00:00: [mem 0x000cc000-0x000cffff] has been
reserved
[ 0.578089] system 00:00: [mem 0x000d0000-0x000d3fff] has been
reserved
[ 0.578095] system 00:00: [mem 0x000d4000-0x000d7fff] has been
reserved
[ 0.578102] system 00:00: [mem 0x000d8000-0x000dbfff] has been
reserved
[ 0.578109] system 00:00: [mem 0x000dc000-0x000dffff] has been
reserved
[ 0.578116] system 00:00: [mem 0x000e0000-0x000e3fff] could not be
reserved
[ 0.578122] system 00:00: [mem 0x000e4000-0x000e7fff] could not be
reserved
[ 0.578129] system 00:00: [mem 0x000e8000-0x000ebfff] could not be
reserved
[ 0.578136] system 00:00: [mem 0x000ec000-0x000effff] could not be
reserved
[ 0.578143] system 00:00: [mem 0x000f0000-0x000fffff] could not be
reserved
[ 0.578150] system 00:00: [mem 0x00100000-0xdf9fffff] could not be
reserved
[ 0.578157] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be
reserved
[ 0.578165] system 00:00: [mem 0xfed4c000-0xffffffff] could not be
reserved
[ 0.578173] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.578238] pnp 00:01: [bus 00-fe]
[ 0.578243] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.578249] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.578254] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.578260] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.578266] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.578271] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.578276] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.578282] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.578287] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.578293] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.578298] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.578304] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.578309] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.578315] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.578320] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.578325] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.578331] pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
[ 0.578337] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.578465] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 0.578698] pnp 00:02: [io 0x0010-0x001f]
[ 0.578703] pnp 00:02: [io 0x0090-0x009f]
[ 0.578708] pnp 00:02: [io 0x0024-0x0025]
[ 0.578713] pnp 00:02: [io 0x0028-0x0029]
[ 0.578717] pnp 00:02: [io 0x002c-0x002d]
[ 0.578722] pnp 00:02: [io 0x0030-0x0031]
[ 0.578726] pnp 00:02: [io 0x0034-0x0035]
[ 0.578731] pnp 00:02: [io 0x0038-0x0039]
[ 0.578736] pnp 00:02: [io 0x003c-0x003d]
[ 0.578741] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.578745] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.578750] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.578754] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.578759] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.578764] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.578768] pnp 00:02: [io 0x0050-0x0053]
[ 0.578773] pnp 00:02: [io 0x0072-0x0077]
[ 0.578778] pnp 00:02: [io 0x0400-0x047f]
[ 0.578782] pnp 00:02: [io 0x0500-0x057f]
[ 0.578787] pnp 00:02: [io 0x0800-0x080f]
[ 0.578792] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.578797] pnp 00:02: [io 0x1600-0x167f]
[ 0.578802] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.578807] pnp 00:02: [mem 0x00000000-0x00000fff]
[ 0.578812] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.578817] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.578822] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.578830] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.578836] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.578996] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.579002] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.579009] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.579015] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.579021] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.579029] system 00:02: [mem 0xf8000000-0xfbffffff] has been
reserved
[ 0.579036] system 00:02: [mem 0x00000000-0x00000fff] could not be
reserved
[ 0.579043] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been
reserved
[ 0.579050] system 00:02: [mem 0xfed10000-0xfed13fff] has been
reserved
[ 0.579057] system 00:02: [mem 0xfed18000-0xfed18fff] has been
reserved
[ 0.579064] system 00:02: [mem 0xfed19000-0xfed19fff] has been
reserved
[ 0.579071] system 00:02: [mem 0xfed45000-0xfed4bfff] has been
reserved
[ 0.579078] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.579232] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.579313] pnp 00:03: Plug and Play ACPI device, IDs PNP0103
(active)
[ 0.579343] pnp 00:04: [io 0x0000-0x000f]
[ 0.579348] pnp 00:04: [io 0x0080-0x008f]
[ 0.579352] pnp 00:04: [io 0x00c0-0x00df]
[ 0.579358] pnp 00:04: [dma 4]
[ 0.579440] pnp 00:04: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.579466] pnp 00:05: [io 0x0061]
[ 0.579543] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.579569] pnp 00:06: [io 0x00f0]
[ 0.579587] pnp 00:06: [irq 13]
[ 0.579684] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.579711] pnp 00:07: [io 0x0070-0x0071]
[ 0.579722] pnp 00:07: [irq 8]
[ 0.579801] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.579828] pnp 00:08: [io 0x0060]
[ 0.579832] pnp 00:08: [io 0x0064]
[ 0.579842] pnp 00:08: [irq 1]
[ 0.579923] pnp 00:08: Plug and Play ACPI device, IDs PNP0303
(active)
[ 0.579955] pnp 00:09: [irq 12]
[ 0.580039] pnp 00:09: Plug and Play ACPI device, IDs LEN0015
PNP0f13 (active)
[ 0.580151] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.580236] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200
PNP0c31 (active)
[ 0.581188] pnp: PnP ACPI: found 11 devices
[ 0.581193] ACPI: ACPI bus type pnp unregistered
[ 0.621452] PCI: max bus depth: 1 pci_try_num: 2
[ 0.621529] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.621568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.621576] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.621589] pci 0000:00:1c.1: bridge window [mem
0xf2500000-0xf25fffff]
[ 0.621609] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.621616] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.621628] pci 0000:00:1c.3: bridge window [mem
0xf1d00000-0xf24fffff]
[ 0.621639] pci 0000:00:1c.3: bridge window [mem
0xf0400000-0xf0bfffff 64bit pref]
[ 0.621654] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.621662] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.621674] pci 0000:00:1c.4: bridge window [mem
0xf1400000-0xf1cfffff]
[ 0.621684] pci 0000:00:1c.4: bridge window [mem
0xf0c00000-0xf13fffff 64bit pref]
[ 0.621726] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.621737] pci 0000:00:1c.0: setting latency timer to 64
[ 0.621760] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 0.621770] pci 0000:00:1c.1: setting latency timer to 64
[ 0.621791] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) ->
IRQ 19
[ 0.621801] pci 0000:00:1c.3: setting latency timer to 64
[ 0.621816] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.621825] pci 0000:00:1c.4: setting latency timer to 64
[ 0.621835] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.621840] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.621846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.621851] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.621857] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.621863] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.621868] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.621874] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.621879] pci_bus 0000:05: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.621885] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff
64bit pref]
[ 0.621891] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.621896] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1cfffff]
[ 0.621902] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff
64bit pref]
[ 0.622046] NET: Registered protocol family 2
[ 0.622227] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.622858] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.623476] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.623772] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.623777] TCP reno registered
[ 0.623784] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.623798] UDP-Lite hash table entries: 512 (order: 2, 16384
bytes)
[ 0.624025] NET: Registered protocol family 1
[ 0.624054] pci 0000:00:02.0: Boot video device
[ 0.624194] PCI: CLS 64 bytes, default 64
[ 0.624295] Unpacking initramfs...
[ 1.144586] Freeing initrd memory: 9300k freed
[ 1.151033] audit: initializing netlink socket (disabled)
[ 1.151055] type=2000 audit(1325172774.991:1): initialized
[ 1.216696] highmem bounce pool size: 64 pages
[ 1.216710] HugeTLB registered 2 MB page size, pre-allocated 0
pages
[ 1.243438] VFS: Disk quotas dquot_6.5.2
[ 1.243526] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.244074] msgmni has been set to 1583
[ 1.244521] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.244584] io scheduler noop registered
[ 1.244588] io scheduler deadline registered
[ 1.244651] io scheduler cfq registered (default)
[ 1.245608] intel_idle: MWAIT substates: 0x21120
[ 1.245613] intel_idle: v0.4 model 0x2A
[ 1.245633] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.245772] ERST: Table is not found!
[ 1.245775] GHES: HEST is not enabled!
[ 1.245912] Serial: 8250/16550 driver, 8 ports, IRQ sharing
disabled
[ 1.373192] Non-volatile memory driver v1.3
[ 1.373198] Linux agpgart interface v0.103
[ 1.373557] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.373701] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 1.376238] agpgart-intel 0000:00:00.0: detected 65536K stolen
memory
[ 1.376511] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xe0000000
[ 1.376855] ahci 0000:00:1f.2: version 3.0
[ 1.376881] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.376983] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.377165] ahci: SSS flag set, parallel bus scan disabled
[ 1.387452] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
Gbps 0x1b impl SATA mode
[ 1.387461] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm
led clo pio slum part ems sxs apst
[ 1.387472] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.394777] scsi0 : ahci
[ 1.395005] scsi1 : ahci
[ 1.395176] scsi2 : ahci
[ 1.395348] scsi3 : ahci
[ 1.395539] scsi4 : ahci
[ 1.395710] scsi5 : ahci
[ 1.397650] ata1: SATA max UDMA/133 abar m2048@0xf2628000 port
0xf2628100 irq 40
[ 1.397658] ata2: SATA max UDMA/133 abar m2048@0xf2628000 port
0xf2628180 irq 40
[ 1.397663] ata3: DUMMY
[ 1.397669] ata4: SATA max UDMA/133 abar m2048@0xf2628000 port
0xf2628280 irq 40
[ 1.397676] ata5: SATA max UDMA/133 abar m2048@0xf2628000 port
0xf2628300 irq 40
[ 1.397681] ata6: DUMMY
[ 1.397976] Fixed MDIO Bus: probed
[ 1.397994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.398037] ehci_hcd 0000:00:1a.0: power state changed by ACPI to
D0
[ 1.398054] ehci_hcd 0000:00:1a.0: power state changed by ACPI to
D0
[ 1.398072] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.398108] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.398117] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.398173] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.398232] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.402124] ehci_hcd 0000:00:1a.0: cache line size of 64 is not
supported
[ 1.402181] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf262a000
[ 1.411407] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.411507] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.411516] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.411524] usb usb1: Product: EHCI Host Controller
[ 1.411532] usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop
ehci_hcd
[ 1.411540] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.412030] hub 1-0:1.0: USB hub found
[ 1.412049] hub 1-0:1.0: 3 ports detected
[ 1.412342] ehci_hcd 0000:00:1d.0: power state changed by ACPI to
D0
[ 1.412361] ehci_hcd 0000:00:1d.0: power state changed by ACPI to
D0
[ 1.412429] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.412491] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.412504] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.412533] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.412641] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.416552] ehci_hcd 0000:00:1d.0: cache line size of 64 is not
supported
[ 1.416609] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2629000
[ 1.426389] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.426480] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.426488] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.426496] usb usb2: Product: EHCI Host Controller
[ 1.426504] usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop
ehci_hcd
[ 1.426512] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.426978] hub 2-0:1.0: USB hub found
[ 1.426995] hub 2-0:1.0: 3 ports detected
[ 1.427317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.427404] uhci_hcd: USB Universal Host Controller Interface
driver
[ 1.427521] Initializing USB Mass Storage driver...
[ 1.427648] usbcore: registered new interface driver usb-storage
[ 1.427655] USB Mass Storage support registered.
[ 1.427715] usbcore: registered new interface driver ums-alauda
[ 1.427771] usbcore: registered new interface driver ums-cypress
[ 1.427826] usbcore: registered new interface driver ums-datafab
[ 1.427881] usbcore: registered new interface driver ums-freecom
[ 1.427933] usbcore: registered new interface driver ums-isd200
[ 1.427994] usbcore: registered new interface driver ums-jumpshot
[ 1.428045] usbcore: registered new interface driver ums-karma
[ 1.428096] usbcore: registered new interface driver ums-onetouch
[ 1.428148] usbcore: registered new interface driver ums-sddr09
[ 1.428200] usbcore: registered new interface driver ums-sddr55
[ 1.428261] usbcore: registered new interface driver ums-usbat
[ 1.428506] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 1.433815] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.433952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.434392] mousedev: PS/2 mouse device common for all mice
[ 1.434869] rtc_cmos 00:07: RTC can wake from S4
[ 1.435232] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.435296] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet
irqs
[ 1.436318] cpuidle: using governor ladder
[ 1.438162] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.438491] cpuidle: using governor menu
[ 1.439926] usbcore: registered new interface driver usbhid
[ 1.439933] usbhid: USB HID core driver
[ 1.440849] TCP cubic registered
[ 1.441137] NET: Registered protocol family 10
[ 1.443400] lib80211: common routines for IEEE802.11 drivers
[ 1.443409] lib80211_crypt: registered algorithm 'NULL'
[ 1.443416] Registering the dns_resolver key type
[ 1.443477] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 1.443522] Using IPI No-Shortcut mode
[ 1.444060] PM: Checking hibernation image partition
/dev/disk/by-id/ata-ST9500420AS_5VJDMDBT-part5
[ 1.702012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.703348] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
succeeded
[ 1.703361] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 1.703372] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1.712992] usb 1-1: new high speed USB device number 2 using
ehci_hcd
[ 1.748744] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
[ 1.748754] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 1.758848] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
succeeded
[ 1.758876] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 1.758887] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1.768188] ata1.00: configured for UDMA/100
[ 1.768574] scsi 0:0:0:0: Direct-Access ATA ST9500420AS
0003 PQ: 0 ANSI: 5
[ 1.769297] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 1.769498] sd 0:0:0:0: [sda] Write Protect is off
[ 1.769505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.769578] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.812073] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.813940] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.826925] usb 1-1: New USB device found, idVendor=8087,
idProduct=0024
[ 1.826935] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.827452] hub 1-1:1.0: USB hub found
[ 1.827502] hub 1-1:1.0: 6 ports detected
[ 1.929648] usb 2-1: new high speed USB device number 2 using
ehci_hcd
[ 2.043815] usb 2-1: New USB device found, idVendor=8087,
idProduct=0024
[ 2.043824] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.044471] hub 2-1:1.0: USB hub found
[ 2.044556] hub 2-1:1.0: 8 ports detected
[ 2.073458] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.118416] usb 1-1.1: new low speed USB device number 3 using
ehci_hcd
[ 2.149304] Refined TSC clocksource calibration: 2292.562 MHz.
[ 2.149317] Switching to clocksource tsc
[ 2.198257] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.198459] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.198471] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 2.199972] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66
[ 2.203131] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.203372] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.203383] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 2.204896] ata2.00: configured for UDMA/66
[ 2.206688] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N
LT20 PQ: 0 ANSI: 5
[ 2.213193] usb 1-1.1: New USB device found, idVendor=17ef,
idProduct=6006
[ 2.213203] usb 1-1.1: New USB device strings: Mfr=4, Product=3,
SerialNumber=0
[ 2.213212] usb 1-1.1: Product: Lenovo 2.4G Wireless Travel Laser
Mouse
[ 2.213220] usb 1-1.1: Manufacturer: Primax
[ 2.224663] input: Primax Lenovo 2.4G Wireless Travel Laser Mouse
as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 2.225266] generic-usb 0003:17EF:6006.0001: input,hiddev0,hidraw0:
USB HID v1.11 Mouse [Primax Lenovo 2.4G Wireless Travel Laser Mouse ] on
usb-0000:00:1a.0-1.1/input0
[ 2.235822] irq 16: nobody cared (try booting with the "irqpoll"
option)
[ 2.235838] Pid: 0, comm: swapper Not tainted 3.1.0-1.2-desktop #1
[ 2.235844] Call Trace:
[ 2.235867] [<c0205433>] try_stack_unwind+0x163/0x180
[ 2.235883] [<c0204167>] dump_trace+0x47/0xf0
[ 2.235894] [<c020549b>] show_trace_log_lvl+0x4b/0x60
[ 2.235903] [<c02054c8>] show_trace+0x18/0x20
[ 2.235916] [<c06f25f3>] dump_stack+0x6d/0x72
[ 2.235927] [<c02adc51>] __report_bad_irq+0x21/0xc0
[ 2.235937] [<c02ae005>] note_interrupt+0x105/0x150
[ 2.235953] [<c02ac36c>] handle_irq_event_percpu+0x9c/0x250
[ 2.235965] [<c02ac554>] handle_irq_event+0x34/0x60
[ 2.235973] [<c02ae6c6>] handle_fasteoi_irq+0x46/0xb0
[ 2.235983] [<c02040ec>] handle_irq+0x5c/0x90
[ 2.235989] handlers:
[ 2.236000] [<c056ff50>] usb_hcd_irq
[ 2.236008] Disabling IRQ #16
[ 2.419115] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1,
caps: 0xd047b3/0xb40000/0xa0000
[ 2.419132] serio: Synaptics pass-through port at
isa0060/serio1/input0
[ 2.483696] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input2
[ 2.511798] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.816342] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.816450] PM: Hibernation image not present or could not be
loaded.
[ 2.816487] registered taskstats version 1
[ 2.830713] Magic number: 7:286:539
[ 2.830882] rtc_cmos 00:07: setting system clock to 2011-12-29
15:32:57 UTC (1325172777)
[ 2.831325] Freeing unused kernel memory: 488k freed
[ 2.831788] Write protecting the kernel text: 5188k
[ 2.831922] Write protecting the kernel read-only data: 3532k
[ 2.831926] NX-protecting the kernel data: 5052k
[ 2.928869] udevd[106]: starting version 173
[ 2.970796] ACPI: acpi_idle yielding to intel_idle
[ 3.005353] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 3.007275] ACPI: Lid Switch [LID]
[ 3.007448] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 3.012344] ACPI: Sleep Button [SLPB]
[ 3.012571] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.013030] ACPI: Power Button [PWRF]
[ 3.031048] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.031065] ACPI: Thermal Zone [THM0] (50 C)
[ 3.121344] [drm] Initialized drm 1.1.0 20060810
[ 3.140276] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.140298] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.140319] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 3.140331] i915 0000:00:02.0: setting latency timer to 64
[ 3.187647] mtrr: no more MTRRs available
[ 3.187655] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 3.188402] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 3.188417] [drm] Supports vblank timestamp caching Rev 1
(10.10.2010).
[ 3.188421] [drm] Driver supports precise vblank timestamp query.
[ 3.188503] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 3.823012] ------------[ cut here ]------------
[ 3.823065] WARNING: at
/home/abuild/rpmbuild/BUILD/kernel-desktop-3.1.0/linux-3.1/drivers/gpu/drm/i915/i915_irq.c:651
ironlake_irq_handler+0xb9f/0xbb0 [i915]()
[ 3.823075] Hardware name: 4239CTO
[ 3.823080] Missed a PM interrupt
[ 3.823085] Modules linked in: i915(+) drm_kms_helper drm
i2c_algo_bit thermal video button processor thermal_sys
[ 3.823110] Pid: 0, comm: swapper Not tainted 3.1.0-1.2-desktop #1
[ 3.823114] Call Trace:
[ 3.823137] [<c0205433>] try_stack_unwind+0x163/0x180
[ 3.823152] [<c0204167>] dump_trace+0x47/0xf0
[ 3.823163] [<c020549b>] show_trace_log_lvl+0x4b/0x60
[ 3.823173] [<c02054c8>] show_trace+0x18/0x20
[ 3.823186] [<c06f25f3>] dump_stack+0x6d/0x72
[ 3.823197] [<c02486e8>] warn_slowpath_common+0x78/0xb0
[ 3.823207] [<c02487b3>] warn_slowpath_fmt+0x33/0x40
[ 3.823238] [<f7e72e8f>] ironlake_irq_handler+0xb9f/0xbb0 [i915]
[ 3.823286] [<c02ac31a>] handle_irq_event_percpu+0x4a/0x250
[ 3.823299] [<c02ac554>] handle_irq_event+0x34/0x60
[ 3.823308] [<c02ae78a>] handle_edge_irq+0x5a/0xe0
[ 3.823318] [<c02040ec>] handle_irq+0x5c/0x90
[ 3.823325] ---[ end trace f711b0db1d6beda3 ]---
[ 4.046385] fbcon: inteldrmfb (fb0) is primary device
[ 4.207297] Console: switching to colour frame buffer device 170x48
[ 4.216045] fb0: inteldrmfb frame buffer device
[ 4.216050] drm: registered panic notifier
[ 4.231082] acpi device:01: registered as cooling_device4
[ 4.231724] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.231951] ACPI: Video Device [VID] (multi-head: yes rom: no
post: no)
[ 4.232071] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0
on minor 0
[ 4.446706] PM: Marking nosave pages: 000000000009d000 -
0000000000100000
[ 4.446720] PM: Basic memory bitmaps created
[ 10.722146] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.049219] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input7
[ 11.248004] PM: Basic memory bitmaps freed
[ 11.248018] video LNXVIDEO:00: Restoring backlight state
[ 11.361894] PM: Starting manual resume from disk
[ 11.361903] PM: Hibernation image partition 8:5 present
[ 11.361906] PM: Looking for hibernation image.
[ 11.362237] PM: Image not found (code -22)
[ 11.362241] PM: Hibernation image not present or could not be
loaded.
[ 11.496242] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 11.758250] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 12.265434] systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 12.635270] systemd[1]: Set hostname to <linux.site>.
[ 14.445609] udevd[403]: starting version 173
[ 14.826688] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 15.059473] boot.localnet[409]: Using boot-specified hostname
'linux.site'
[ 15.059525] boot.localnet[409]: Setting up hostname 'linux'..done
[ 15.059682] boot.lvm[426]: Waiting for udev to settle...
[ 15.105519] boot.localnet[409]: Setting up loopback interface
RTNETLINK answers: File exists
[ 15.108261] boot.localnet[409]: ..done
[ 15.776125] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 15.776269] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 15.776344] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 15.818579] cfg80211: Calling CRDA to update world regulatory
domain
[ 15.875423] iTCO_vendor_support: vendor-support=0
[ 15.899398] wmi: Mapper loaded
[ 15.900823] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 15.900832] thinkpad_acpi: 'ibm-acpi - IBM ThinkPad ACPI Extras
Driver' (http://ibm-acpi.sf.net/)
[ 15.900840] thinkpad_acpi: ThinkPad BIOS 8AET49WW (1.29 ), EC
unknown
[ 15.900847] thinkpad_acpi: Lenovo ThinkPad T520, model 4239CTO
[ 15.902298] thinkpad_acpi: detected a 8-level brightness capable
ThinkPad
[ 15.902939] thinkpad_acpi: radio switch found; radios are enabled
[ 15.907906] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
[ 15.907915] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 15.911650] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is
likely not the best way to go about it
[ 15.911660] thinkpad_acpi: please consider using the driver
defaults, and refer to up-to-date thinkpad-acpi documentation
[ 15.921808] sdhci: Secure Digital Host Controller Interface driver
[ 15.921817] sdhci: Copyright(c) Pierre Ossman
[ 15.923412] sdhci-pci 0000:0d:00.0: SDHCI controller found
[1180:e823] (rev 5)
[ 15.923457] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 15.923540] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 15.923570] _regulator_get: 0000:0d:00.0 supply vmmc not found,
using dummy regulator
[ 15.923701] Registered led device: mmc0::
[ 15.923877] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 15.927079] Registered led device: tpacpi::thinklight
[ 15.927194] Registered led device: tpacpi::power
[ 15.927262] Registered led device: tpacpi::standby
[ 15.927330] Registered led device: tpacpi::thinkvantage
[ 15.927359] thinkpad_acpi: Standard ACPI backlight interface
available, not loading native one
[ 15.928606] thinkpad_acpi: Console audio control enabled, mode:
monitor (read only)
[ 15.933725] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input8
[ 15.962100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 15.962364] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 15.963259] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.985705] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 15.986454] ACPI: AC Adapter [AC] (on-line)
[ 16.026003] ACPI: Deprecated procfs I/F for battery is loaded,
please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 16.026026] ACPI: Battery Slot [BAT0] (battery present)
[ 16.043682] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level,
low) -> IRQ 19
[ 16.043709] firewire_ohci 0000:0d:00.3: setting latency timer to 64
[ 16.047214] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 16.066520] mei: module is from the staging directory, the quality
is unknown, you have been warned.
[ 16.096702] firewire_ohci 0000:0d:00.3: irq 43 for MSI/MSI-X
[ 16.096858] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI
v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 16.139342] input: PC Speaker as
/devices/platform/pcspkr/input/input9
[ 16.224949] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.226170] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 16.397993] cfg80211: World regulatory domain updated:
[ 16.398001] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 16.398009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 16.398015] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 16.398021] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 16.398027] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 16.398032] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 16.413314] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 16.413322] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.413671] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.429778] hda_codec: CX20590: BIOS auto-probing.
[ 16.429802] ALSA hda_codec.c:4877 autoconfig: line_outs=1
(0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 16.429810] ALSA hda_codec.c:4881 speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 16.429816] ALSA hda_codec.c:4885 hp_outs=1
(0x19/0x0/0x0/0x0/0x0)
[ 16.429822] ALSA hda_codec.c:4886 mono: mono_out=0x0
[ 16.429826] ALSA hda_codec.c:4890 inputs:
[ 16.429832] ALSA hda_codec.c:4894 Mic=0x1b
[ 16.429838] ALSA hda_codec.c:4894 Internal Mic=0x23
[ 16.429842] ALSA hda_codec.c:4896
[ 16.462914] HDMI status: Codec=3 Pin=5 Presence_Detect=0
ELD_Valid=0
[ 16.463283] HDMI status: Codec=3 Pin=6 Presence_Detect=0
ELD_Valid=0
[ 16.463683] HDMI status: Codec=3 Pin=7 Presence_Detect=0
ELD_Valid=0
[ 16.468735] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 16.468996] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.469256] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.469917] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 16.470325] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 16.470355] e1000e 0000:00:19.0: setting latency timer to 64
[ 16.470645] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 16.519662] rtl8192ce 0000:03:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 16.519692] rtl8192ce 0000:03:00.0: setting latency timer to 64
[ 16.597135] firewire_core: created device fw0: GUID
f0def1ff7cbda0ff, S400
[ 16.657851] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width
x1) f0:de:f1:7c:bd:a0
[ 16.657860] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network
Connection
[ 16.657921] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No:
1000FF-0FF
[ 16.657976] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 16.657991] mei 0000:00:16.0: setting latency timer to 64
[ 16.832279] ifup[705]: Service network not started and mode 'auto'
-> skipping
[ 16.834692] ieee80211 phy0: Selected rate control algorithm
'rtl_rc'
[ 16.835822] rtlwifi: wireless switch is on
[ 16.924091] ifup[729]: Service network not started and mode 'auto'
-> skipping
[ 17.761232] Adding 2104476k swap on /dev/sda5. Priority:0 extents:1
across:2104476k
[ 17.819909] fuse init (API version 7.17)
[ 18.132735] ntfs-3g[760]: Version 2011.4.12 integrated FUSE 27
[ 18.132764] ntfs-3g[760]: Mounted /dev/sda3 (Read-Write, label
"Lenovo_Recovery", NTFS 3.1)
[ 18.132788] ntfs-3g[760]: Cmdline options:
rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dma sk=022,locale=en_US.UTF-8
[ 18.132815] ntfs-3g[760]: Mount options:
rw,noexec,nosuid,nodev,users,allow_other,nonempty, atime,fsname=/dev/sda3,blkdev,blksize=4096,default_permissions
[ 18.132841] ntfs-3g[760]: Global ownership and permissions enforced,
configuration type 1
[ 18.132861] ntfs-3g[760]: Warning : using problematic uid==0 and
gid!=0
[ 18.255683] ntfs-3g[761]: Version 2011.4.12 integrated FUSE 27
[ 18.255713] ntfs-3g[761]: Mounted /dev/sda1 (Read-Write, label
"SYSTEM_DRV", NTFS 3.1)
[ 18.255740] ntfs-3g[761]: Cmdline options:
rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dma sk=022,locale=en_US.UTF-8
[ 18.255765] ntfs-3g[761]: Mount options:
rw,noexec,nosuid,nodev,users,allow_other,nonempty, atime,fsname=/dev/sda1,blkdev,blksize=4096,default_permissions
[ 18.255792] ntfs-3g[761]: Global ownership and permissions enforced,
configuration type 1
[ 18.255808] ntfs-3g[761]: Warning : using problematic uid==0 and
gid!=0
[ 18.807019] systemd-fsck[754]: /dev/sda7: clean, 1090/8814592 files,
603874/35248610 blocks
[ 19.053644] ntfs-3g[766]: Version 2011.4.12 integrated FUSE 27
[ 19.053676] ntfs-3g[766]: Mounted /dev/sda2 (Read-Write, label
"Windows7_OS", NTFS 3.1)
[ 19.053702] ntfs-3g[766]: Cmdline options:
rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dma sk=022,locale=en_US.UTF-8
[ 19.053729] ntfs-3g[766]: Mount options:
rw,noexec,nosuid,nodev,users,allow_other,nonempty, atime,fsname=/dev/sda2,blkdev,blksize=4096,default_permissions
[ 19.053755] ntfs-3g[766]: Global ownership and permissions enforced,
configuration type 1
[ 19.053777] ntfs-3g[766]: Warning : using problematic uid==0 and
gid!=0
[ 19.090877] kjournald starting. Commit interval 5 seconds
[ 19.092536] EXT3-fs (sda7): using internal journal
[ 19.092545] EXT3-fs (sda7): mounted filesystem with ordered data
mode
[ 20.780226] boot.lvm[426]: Scanning for LVM volume groups...
[ 21.114018] boot.lvm[426]: No volume groups found
[ 21.170646] device-mapper: uevent: version 1.0.3
[ 21.170804] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
initialised: dm-devel@redhat.com
[ 21.171826] boot.lvm[426]: No volume groups found
[ 21.186952] boot.lvm[426]: Reading all physical volumes. This may
take a while...
[ 21.187460] boot.lvm[426]: Activating LVM volume groups...
[ 21.197725] boot.lvm[426]: No volume groups found
[ 21.199386] boot.lvm[426]: ..done
[ 21.645048] alsactl[789]: /usr/sbin/alsactl: load_state:1586: Cannot
open /var/lib/alsa/asound.state for reading: No such file or directory
[ 21.649498] alsactl[789]: Found hardware: "HDA-Intel" "Intel
CougarPoint HDMI" "HDA:14f1506e,17aa21cf,00100002
HDA:80862805,80860101,00100000" "0x17aa" "0x21cf"
[ 21.649525] alsactl[789]: Hardware is initialized using a generic
method
[ 21.651501] alsactl[789]: Found hardware: "ThinkPad EC" "ThinkPad EC
(unknown)" "" "" ""
[ 21.651526] alsactl[789]: Hardware is initialized using a generic
method
[ 21.663249] ck-log-system-start[790]: ** (process:790): WARNING **:
Couldn't create log file /var/log/ConsoleKit/history (No such file or
directory)
[ 21.762114] purge-kernels[808]: Removing old kernel packages...
[ 21.857496] systemd[1]: console-kit-log-system-start.service: main
process exited, code=exited, status=1
[ 21.890073] systemd[1]: Unit console-kit-log-system-start.service
entered failed state.
[ 21.943050] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
[ 21.944328] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
[ 21.947418] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x18
[ 21.949759] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x18
[ 21.950932] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 22.019731] microcode: CPU0 updated to revision 0x1b, date =
2011-07-14
[ 22.020127] microcode: CPU1 updated to revision 0x1b, date =
2011-07-14
[ 22.020537] microcode: CPU2 updated to revision 0x1b, date =
2011-07-14
[ 22.020919] microcode: CPU3 updated to revision 0x1b, date =
2011-07-14
[ 29.003944] acpid[978]: client connected from 2417[0:0]
[ 29.003967] acpid[978]: 1 client rule loaded
[ 30.845861] YaST2.call (1957): /proc/2417/oom_adj is deprecated,
please use /proc/2417/oom_score_adj instead.
[ 37.270596] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 37.321189] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 37.321393] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.333889] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 37.676328] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.962269] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 44.454161] NET: Registered protocol family 17
[ 64.774037] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 64.820192] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 64.840445] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 100.314037] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 100.466468] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 100.466516] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 100.466540] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 100.984126] hda_codec: CX20590: BIOS auto-probing.
[ 100.984147] ALSA hda_codec.c:4877 autoconfig: line_outs=1
(0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 100.984155] ALSA hda_codec.c:4881 speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 100.984162] ALSA hda_codec.c:4885 hp_outs=1
(0x19/0x0/0x0/0x0/0x0)
[ 100.984167] ALSA hda_codec.c:4886 mono: mono_out=0x0
[ 100.984172] ALSA hda_codec.c:4890 inputs:
[ 100.984178] ALSA hda_codec.c:4894 Mic=0x1b
[ 100.984183] ALSA hda_codec.c:4894 Internal Mic=0x23
[ 100.984188] ALSA hda_codec.c:4896
[ 100.987584] HDMI status: Codec=3 Pin=5 Presence_Detect=0
ELD_Valid=0
[ 100.987977] HDMI status: Codec=3 Pin=6 Presence_Detect=0
ELD_Valid=0
[ 100.988357] HDMI status: Codec=3 Pin=7 Presence_Detect=0
ELD_Valid=0
[ 100.993453] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 100.993732] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 100.993902] input: HDA Intel PCH HDMI/DP as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 101.012033] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input16
[ 110.367873] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 126.147297] acpid[978]: client 2417[0:0] has disconnected
[ 126.147323] acpid[978]: client connected from 5140[0:0]
[ 126.147340] acpid[978]: 1 client rule loaded
[ 126.152940] xdm[5092]: Starting service gdm..done
[ 126.275015] NetworkManager[5099]: NetworkManager[5099]: <info>
NetworkManager (version 0.9.1.90) is starting...
[ 126.275346] NetworkManager[5099]: NetworkManager[5099]: <info> Read
config file /etc/NetworkManager/NetworkManager.conf
[ 126.295900] NetworkManager[5099]: NetworkManager[5099]: <info> VPN:
loaded org.freedesktop.NetworkManager.openvpn
[ 126.298530] NetworkManager[5099]: NetworkManager[5099]: <info> VPN:
loaded org.freedesktop.NetworkManager.pptp
[ 126.299106] NetworkManager[5099]: NetworkManager[5099]: <info> VPN:
loaded org.freedesktop.NetworkManager.vpnc
[ 126.327626] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.PolicyKit1' (using servicehelper)
[ 126.422025] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.PolicyKit1'
[ 126.429795] NetworkManager[5099]: NetworkManager[5099]: <info>
Loaded plugin ifcfg-suse: (C) 2008 Novell, Inc. To report bugs please
use the NetworkManager mailing list.
[ 126.429974] NetworkManager[5099]: NetworkManager[5099]: <info>
Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs
please use the NetworkManager mailing list.
[ 126.430730] NetworkManager[5099]: NetworkManager[5099]: <info>
trying to start the modem manager...
[ 126.431165] NetworkManager[5099]: NetworkManager[5099]: <info>
monitoring kernel firmware directory '/lib/firmware'.
[ 126.431202] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.ModemManager' (using servicehelper)
[ 126.432027] NetworkManager[5099]: NetworkManager[5099]: <info> found
WiFi radio killswitch rfkill0 (at
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill0)
(driver (unknown))
[ 126.434541] NetworkManager[5099]: NetworkManager[5099]: <info> WiFi
enabled by radio killswitch; enabled by state file
[ 126.434549] NetworkManager[5099]: NetworkManager[5099]: <info> WWAN
enabled by radio killswitch; enabled by state file
[ 126.434555] NetworkManager[5099]: NetworkManager[5099]: <info> WiMAX
enabled by radio killswitch; enabled by state file
[ 126.434561] NetworkManager[5099]: NetworkManager[5099]: <info>
Networking is enabled by state file
[ 126.435134] NetworkManager[5099]: NetworkManager[5099]: <info>
Clearing nscd hosts cache.
[ 126.436125] NetworkManager[5099]: sent invalidate(hosts) request,
exiting
[ 126.436320] NetworkManager[5099]: NetworkManager[5099]: <info>
Setting system hostname to 'linux-yx68.site' (from system
configuration)
[ 126.438365] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): carrier is OFF
[ 126.438504] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): new Ethernet device (driver: 'e1000e' ifindex: 2)
[ 126.438511] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): exported as /org/freedesktop/NetworkManager/Devices/0
[ 126.438517] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): now managed
[ 126.438613] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): device state change: unmanaged -> unavailable (reason 'managed')
[10 20 2]
[ 126.438777] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): bringing up device.
[ 126.439209] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.nm_dispatcher' (using servicehelper)
[ 126.455829] dbus-daemon[1250]: modem-manager[5162]: <info>
ModemManager (version 0.5) starting...
[ 126.457767] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.ModemManager'
[ 126.477205] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Option High-Speed
[ 126.478747] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Ericsson MBM
[ 126.479989] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin X22X
[ 126.481873] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Longcheer
[ 126.482647] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Novatel
[ 126.483396] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin SimTech
[ 126.484459] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Option
[ 126.484956] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Linktop
[ 126.490323] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin ZTE
[ 126.510946] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin MotoC
[ 126.512564] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Sierra
[ 126.514752] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Wavecom
[ 126.516573] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Samsung
[ 126.517207] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Nokia
[ 126.517828] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Gobi
[ 126.518651] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Huawei
[ 126.519468] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin AnyData
[ 126.520750] dbus-daemon[1250]: modem-manager[5162]: <info> Loaded
plugin Generic
[ 126.536469] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.nm_dispatcher'
[ 126.563838] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 126.614644] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 126.614791] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 126.615169] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): preparing device.
[ 126.615312] NetworkManager[5099]: NetworkManager[5099]: <info>
(eth0): deactivating device (reason 'managed') [2]
[ 126.616316] NetworkManager[5099]: NetworkManager[5099]: <info> Added
default wired connection 'Wired connection 1' for
/sys/devices/pci0000:00/0000:00:19.0/net/eth0
[ 126.620312] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 126.621134] dbus-daemon[1250]:
/etc/NetworkManager/dispatcher.d/netcontrol_services: line 37:
scripts/ifhostname-services: No such file or directory
[ 126.953501] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): driver supports SSID scans (scan_capa 0x01).
[ 126.953672] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): new 802.11 WiFi device (driver: 'rtl8192ce' ifindex: 3)
[ 126.953908] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
[ 126.953916] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): now managed
[ 126.953923] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): device state change: unmanaged -> unavailable (reason
'managed') [10 20 2]
[ 126.953995] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): preparing device.
[ 126.954002] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): deactivating device (reason 'managed') [2]
[ 126.954687] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='fi.w1.wpa_supplicant1' (using servicehelper)
[ 126.955353] NetworkManager[5099]: NetworkManager[5099]: <warn> bluez
error getting default adapter: The name org.bluez was not provided by
any .service files
[ 126.955575] NetworkManager[5099]: NetworkManager[5099]: <info>
modem-manager is now available
[ 126.991057] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'fi.w1.wpa_supplicant1'
[ 126.991247] NetworkManager[5099]: NetworkManager[5099]: <info>
wpa_supplicant started
[ 127.021738] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): supplicant interface state: starting -> ready
[ 127.021771] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): device state change: unavailable -> disconnected (reason
'supplicant-available') [20 30 42]
[ 127.024937] NetworkManager[5099]: NetworkManager[5099]: <info>
(wlan0): supplicant interface state: ready -> inactive
[ 128.412199] dbus-daemon[1250]: dbus[1250]: [system] Activating via
systemd: service name='org.freedesktop.ConsoleKit'
unit='console-kit-daemon.service'
[ 128.412233] dbus-daemon[1250]: dbus[1250]: [system] Activating via
systemd: service name='org.freedesktop.Accounts'
unit='accounts-daemon.service'
[ 128.510180] console-kit-daemon[5302]: missing action
[ 128.515118] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.ConsoleKit'
[ 128.561905] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.Accounts'
[ 128.859927] systemd-logind[822]: New user tell logged in.
[ 128.860067] systemd-logind[822]: New session 1 of user tell.
[ 128.894496] systemd-logind[822]: Linked /tmp/.X11-unix/X0 to
/run/user/tell/X11/display.
[ 130.967493] NetworkManager[5099]: (NetworkManager:5099):
GLib-GIO-WARNING **: Missing callback called fullpath =
/var/run/ConsoleKit/database
[ 131.060854] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.UPower' (using servicehelper)
[ 131.160734] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.UPower'
[ 131.272451] dbus-daemon[1250]: (upowerd:5481): UPower-Linux-WARNING
**: failed to open /etc/crypttab: Failed to open file '/etc/crypttab':
No such file or directory
[ 133.161571] EXT4-fs (sda6): re-mounted. Opts:
acl,user_xattr,commit=0
[ 135.389369] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.RealtimeKit1' (using servicehelper)
[ 135.414745] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.RealtimeKit1'
[ 136.019387] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.PackageKit' (using servicehelper)
[ 136.095955] dbus-daemon[1250]: (packagekitd:5578):
PackageKit-Zypp-DEBUG: zypp_backend_initialize
[ 136.143388] dbus-daemon[1250]: dbus[1250]: [system] Activating
service name='org.freedesktop.UDisks' (using servicehelper)
[ 136.177537] dbus-daemon[1250]: (process:5584): GLib-WARNING **:
goption.c:2168: ignoring no-arg, optional-arg or filename flags (16) on
option of type 1
[ 136.180591] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.UDisks'
[ 136.180902] dbus-daemon[1250]: (udisks-daemon:5584):
udisks-daemon-DEBUG: Starting daemon version 1.0.4
[ 136.195540] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:00.0
[ 136.195630] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:00.0
[ 136.195642] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:02.0
[ 136.195700] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:02.0
[ 136.195709] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:16.0
[ 136.195760] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:16.0
[ 136.195769] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:19.0
[ 136.195820] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:19.0
[ 136.195828] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1a.0
[ 136.195880] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1a.0
[ 136.195888] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1b.0
[ 136.195938] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1b.0
[ 136.195946] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.0
[ 136.195996] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.0
[ 136.196005] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.1
[ 136.196055] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.1
[ 136.196064] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0
[ 136.196129] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0
[ 136.196137] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.3
[ 136.196145] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.3
[ 136.196209] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.4
[ 136.196219] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.4
[ 136.196227] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0
[ 136.196280] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0
[ 136.196289] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1c.4/0000:0d:00.3
[ 136.196361] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1c.4/0000:0d:00.3
[ 136.196369] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1d.0
[ 136.196377] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1d.0
[ 136.196611] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1f.0
[ 136.196620] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1f.0
[ 136.196627] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1f.2
[ 136.196634] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2
[ 136.196740] dbus-daemon[1250]: **** pci ADDED
/sys/devices/pci0000:00/0000:00:1f.2
[ 136.196750] dbus-daemon[1250]: **** pci ADDING
/sys/devices/pci0000:00/0000:00:1f.3
[ 136.196787] dbus-daemon[1250]: **** pci IGNORING ADD
/sys/devices/pci0000:00/0000:00:1f.3
[ 136.197025] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0
[ 136.197221] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0
[ 136.197231] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1
[ 136.197469] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1
[ 136.197479] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2
[ 136.197582] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2
[ 136.197591] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3
[ 136.197731] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3
[ 136.197740] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host4/scsi_host/host4
[ 136.197879] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host4/scsi_host/host4
[ 136.197888] dbus-daemon[1250]: **** scsi_host ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host5/scsi_host/host5
[ 136.198008] dbus-daemon[1250]: **** scsi_host ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host5/scsi_host/host5
[ 136.198454] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.198816] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.209750] dbus-daemon[1250]: dbus[1250]: [system] Successfully
activated service 'org.freedesktop.PackageKit'
[ 136.215476] dbus-daemon[1250]: helper(pid 5587): launched job
udisks-helper-ata-smart-collect on /dev/sda
[ 136.215532] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.215705] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.215761] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.228118] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.228127] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.228163] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.228647] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.228656] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.228690] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.229159] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.229167] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.229201] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.229662] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.229671] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.229704] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.230145] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.230153] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.230186] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.230661] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.230669] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.230701] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.231133] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.231169] dbus-daemon[1250]: **** ADDING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.231201] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.231761] dbus-daemon[1250]: **** ADDED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.231833] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.231841] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.232149] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ 136.232157] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.232164] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.232489] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
[ 136.232497] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.232504] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.232802] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
[ 136.232810] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.232817] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.233113] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
[ 136.233121] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.233128] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.233404] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 136.233412] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.233420] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.233741] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 136.233750] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.233756] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.234057] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
[ 136.234065] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.234072] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.234409] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2
[ 136.234416] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.234423] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.234699] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3
[ 136.346156] dbus-daemon[1250]: helper(pid 5587): completed with
exit code 0
[ 136.441396] dbus-daemon[1250]: **** EMITTING CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
[ 142.307075] dbus-daemon[1250]: **** USING MOUNT OPTIONS
'uhelper=udisks,nodev,nosuid,uid=1000,gid=100,ioch arset=utf8,mode=0400,dmode=0500'
FOR DEVICE /dev/sr0
[ 142.308888] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 142.309033] dbus-daemon[1250]: helper(pid 5661): launched job mount
on /dev/sr0
[ 145.135924] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 145.217717] ISO 9660 Extensions: RRIP_1991A
[ 145.217929] dbus-daemon[1250]: **** /proc/self/mountinfo changed
[ 145.218329] dbus-daemon[1250]: **** MOUNTED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.218344] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.218355] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.218953] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.219070] dbus-daemon[1250]: helper(pid 5661): completed with
exit code 0
[ 145.219335] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.219924] dbus-daemon[1250]: **** EMITTING CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 145.220080] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 146.948897] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 156.929665] dbus-daemon[1250]: (packagekitd:5578):
PackageKit-Zypp-DEBUG: zypp_backend_destroy
[ 173.650070] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.650361] dbus-daemon[1250]: helper(pid 5688): launched job
umount on /dev/sr0
[ 173.652675] dbus-daemon[1250]: **** /proc/self/mountinfo changed
[ 173.653124] dbus-daemon[1250]: **** UNMOUNTED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.653179] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.653245] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.675075] dbus-daemon[1250]: **** EMITTING CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.675103] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.675243] dbus-daemon[1250]: helper(pid 5688): completed with
exit code 0
[ 173.675260] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.675807] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.700325] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 173.700523] dbus-daemon[1250]: helper(pid 5689): launched job eject
on /dev/sr0
[ 176.903880] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 177.430996] dbus-daemon[1250]: helper(pid 5689): completed with
exit code 0
[ 177.431090] dbus-daemon[1250]: **** EMITTING JOB-CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 177.456509] dbus-daemon[1250]: **** CHANGING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 177.456522] dbus-daemon[1250]: **** UPDATING
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 177.457102] dbus-daemon[1250]: **** EMITTING CHANGED for
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 177.457606] dbus-daemon[1250]: **** CHANGED
/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
[ 216.848936] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 266.771498] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 326.681767] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 386.591810] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 446.503449] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 506.415399] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 566.324462] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 626.236050] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 686.148159] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 746.058891] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 805.970122] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 865.881594] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 925.792133] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 985.703692] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 1045.615152] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin
[ 1105.524911] rtl8192c_common: Loading firmware file
rtlwifi/rtl8192cfw.bin


--
trowling
------------------------------------------------------------------------
trowling's Profile: http://forums.novell.com/member.php?userid=105610
View this thread: http://forums.novell.com/showthread.php?t=450024

malcolmlewis
29-Dec-2011, 17:04
On Thu, 29 Dec 2011 06:46:13 GMT
trowling <trowling@no-mx.forums.novell.com> wrote:

>
> Hi again ....
>
> Well I downloaded the copy of Open SUSE 12.1 and burned it onto a DVD
> and installed it on my Laptop
> It installed OK and left the Windows 7 rubbish on the drive also ...
> in dual boot mode
>
> I configured the network for a static IP Address and connected to my
> router no problems.
> Loaded up Firefox and went straight to opensuse.org ...
>
>
> So what do I have here?
> What is the difference between my old SLED 11 SP1 and this OpenSuse
> 12.1?
> Do I have to pay for this version?
> Can I get the spinning 3D cube working on this version? ... and
> how? .. I've tried but can't see it anywhere obvious.
>
> .. Yes I know the 3D cube is rather dull to most of the guru Linux
> set, but hey I like it.
> That's one of the reasons I bought SLED in the first place because I
> saw it on an IBM bods machine in a tutorial and thought it was
> exclusive to SLED.
> (Only found out later that it is apparantely available in Ubantu also)
>
> As my old copy of SLED 11 is now out of the 12 month support mode and
> I don't know if I have to pay another $50 to get the latest version,
> or if the latest version of SLED will work like this version does ...
> I'm somewhat confused ..
> (Note: As a Lotus Notes programmer who has to work full time in a
> Windows environment, you can probably tell that I'm not overly
> knowledgeable about Linux, I try to install and play on my holidays
> etc .. I'd really like to get a Notes development environment up and
> running on Linux some day ... that's my immediate reason for the
> playing with this stuff ... )
>
>
>
Hi
So from your output, it's a rtlwifi driver;


[ 16.835822] rtlwifi: wireless switch is on

/sbin/modinfo rtlwifi
filename: /lib/modules/3.1.0-1.2-desktop/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
description: Realtek 802.11n PCI wireless core license: GPL
author: Larry Finger <Larry.FInger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
srcversion: DE950EDFD265520B1C315FE
depends: mac80211,cfg80211
vermagic: 3.1.0-1.2-desktop SMP preempt mod_unload modversions

[ 216.848936] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin


openSUSE releases every eight months so short release cycles, then it's
supported for updates for 18 months... and it's free as well ;) We also
have a openSUSE forum (forums.opensuse.org).

With 12.1 there is no more GNOME 2.x with compiz (spinning cube etc),
all GNOME 3.x which is the new desktop design.

Sometime early next year there should be an SP2 release (I need to
check if the driver is in that version). You could look at renewing
your update subscription then to get updates? I normally purchase the
three year basic (just updates) as it works out about $35 per year.

Also you do get updates to newer releases if your subscription is
active.

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 19:22, 3 users, load average: 0.00, 0.02, 0.05
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

malcolmlewis
30-Dec-2011, 04:02
On Thu, 29 Dec 2011 16:04:51 GMT
malcolmlewis <malcolmlewis@no-mx.forums.novell.com> wrote:

> On Thu, 29 Dec 2011 06:46:13 GMT
> trowling <trowling@no-mx.forums.novell.com> wrote:
>
> >
> > Hi again ....
> >
> > Well I downloaded the copy of Open SUSE 12.1 and burned it onto a
> > DVD and installed it on my Laptop
> > It installed OK and left the Windows 7 rubbish on the drive also ...
> > in dual boot mode
> >
> > I configured the network for a static IP Address and connected to my
> > router no problems.
> > Loaded up Firefox and went straight to opensuse.org ...
> >
> >
> > So what do I have here?
> > What is the difference between my old SLED 11 SP1 and this OpenSuse
> > 12.1?
> > Do I have to pay for this version?
> > Can I get the spinning 3D cube working on this version? ... and
> > how? .. I've tried but can't see it anywhere obvious.
> >
> > .. Yes I know the 3D cube is rather dull to most of the guru Linux
> > set, but hey I like it.
> > That's one of the reasons I bought SLED in the first place because I
> > saw it on an IBM bods machine in a tutorial and thought it was
> > exclusive to SLED.
> > (Only found out later that it is apparantely available in Ubantu
> > also)
> >
> > As my old copy of SLED 11 is now out of the 12 month support mode
> > and I don't know if I have to pay another $50 to get the latest
> > version, or if the latest version of SLED will work like this
> > version does ... I'm somewhat confused ..
> > (Note: As a Lotus Notes programmer who has to work full time in a
> > Windows environment, you can probably tell that I'm not overly
> > knowledgeable about Linux, I try to install and play on my holidays
> > etc .. I'd really like to get a Notes development environment up and
> > running on Linux some day ... that's my immediate reason for the
> > playing with this stuff ... )
> >
> >
> >
> Hi
> So from your output, it's a rtlwifi driver;
>

> [ 16.835822] rtlwifi: wireless switch is on
>
> /sbin/modinfo rtlwifi
> filename: /lib/modules/3.1.0-1.2-desktop/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
> description: Realtek 802.11n PCI wireless core license: GPL
> author: Larry Finger <Larry.FInger@lwfinger.net>
> author: Realtek WlanFAE <wlanfae@realtek.com>
> author: lizhaoming <chaoming_li@realsil.com.cn>
> srcversion: DE950EDFD265520B1C315FE
> depends: mac80211,cfg80211
> vermagic: 3.1.0-1.2-desktop SMP preempt mod_unload modversions
>
> [ 216.848936] rtl8192c_common: Loading firmware file
> rtlwifi/rtl8192cfw.bin
>
> openSUSE releases every eight months so short release cycles, then
> it's supported for updates for 18 months... and it's free as well ;)
> We also have a openSUSE forum (forums.opensuse.org).
>
> With 12.1 there is no more GNOME 2.x with compiz (spinning cube etc),
> all GNOME 3.x which is the new desktop design.
>
> Sometime early next year there should be an SP2 release (I need to
> check if the driver is in that version). You could look at renewing
> your update subscription then to get updates? I normally purchase the
> three year basic (just updates) as it works out about $35 per year.
>
> Also you do get updates to newer releases if your subscription is
> active.
>
Hi
So I've checked my beta copy of SP2 and it has the kernel wireless
driver for your hardware, so it's just a matter of playing the waiting
game ;)

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 2:31, 3 users, load average: 0.04, 0.03, 0.05
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

trowling
31-Dec-2011, 10:56
Malcolm


Is the beta copy of SP2 you mention for SLED 11? or are you referring
to an SP2 for the Open SUSE that I just downloaded and installed?

Also, do you know if there was an rtlwifi driver made available after
SUSE 11 SP1 was released?

I'd like to stay with SLED rather than open SUSE so I can get the 3D
cube graphics

I just checked my subscription and it doesn't expire until February
2012, so I assume from that that I will be able to download SP2 if and
when it becomes available?




Regards,


--
trowling
------------------------------------------------------------------------
trowling's Profile: http://forums.novell.com/member.php?userid=105610
View this thread: http://forums.novell.com/showthread.php?t=450024

malcolmlewis
05-Jan-2012, 22:39
On Sat, 31 Dec 2011 09:56:02 GMT
trowling <trowling@no-mx.forums.novell.com> wrote:

>
> Malcolm
>
>
> Is the beta copy of SP2 you mention for SLED 11? or are you referring
> to an SP2 for the Open SUSE that I just downloaded and installed?
>
> Also, do you know if there was an rtlwifi driver made available after
> SUSE 11 SP1 was released?
>
> I'd like to stay with SLED rather than open SUSE so I can get the 3D
> cube graphics
>
> I just checked my subscription and it doesn't expire until February
> 2012, so I assume from that that I will be able to download SP2 if and
> when it becomes available?
>
>
>
>
> Regards,
>
>
Hi
Yes it's SLED 11 SP2 beta, not sure if it will be released in Feb, it
will always work, just won't get updates unless it's active.

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.1 (x86_64) Kernel 3.1.0-1.2-desktop
up 19:05, 4 users, load average: 0.02, 0.04, 0.05
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU