View Full Version : SLES 11sp1 Multipath configuration issues

07-Sep-2012, 00:50
I'm trying to get a SLES 11 sp1 setup with Multipath

I've taken to following steps to setup and enable multipath on the server in question:

1) initially install the OS on a single path (multipath installation rendered the machine incapable of booting)
2) reboot machine with multiple paths added
3) create /etc/multipath.conf (included below)
3.5) update the packages listed in KB article 7008995 (http://www.novell.com/support/kb/doc.php?id=7008995)
4) add dm-multipath to the INITRD_MOUDULES and run mkinitrd
5) add boot.multipath and multipathd to the boot sequence
6) check that fstab and menu.lst are using /dev/disk/by-id/scsi-### to mount disks
7) reboot

This sequence of steps results in a properly working multipath enabled OS when I'm using SLES 11 sp2 but fails to work with sp1.

If anyone out there has any thoughts on this I'd appreciate any advice.

Here's the /etc/multipath.conf file

## This is a template multipath-tools configuration file
## Uncomment the lines relevent to your environment
defaults {
# udev_dir /dev
# polling_interval 10
# path_selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
# prio const
# path_checker directio
# rr_min_io 100
# flush_on_last_del no
# max_fds 8192
# rr_weight priorities
# failback immediate
# no_path_retry fail
# queue_without_daemon no
# user_friendly_names no
# # See /usr/share/doc/packages/device-mapper/12-dm-permissions.rules
# # to set mode/uid/gid.
# blacklist {
# wwid 2100001b3214f85e
# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
# devnode "^hd[a-z][[0-9]*]"
# device {
# vendor DEC.*
# product MSA[15]00
# }

devices {
# Device attributed to EMC VNX
device {
vendor "DGC"
product "*"
hardware_handler "1 alua"

Automatic reply
13-Sep-2012, 13:30

It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.

Has your issue been resolved? If not, you might try one of the following options:

- Visit http://www.suse.com/support and search the knowledgebase and/or check all
the other support options available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.suse.com)

Be sure to read the forum FAQ about what to expect in the way of responses:

If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.

Good luck!

Your SUSE Forums Team

13-Sep-2012, 20:53
abuckl3y wrote:

> I'm trying to get a SLES 11 sp1 setup with Multipath

I'm sorry I don't have any multipath experience and am therefore unable
to offer any advise with respect to your issue.

I do see a number of open bugs affecting multipath. Perhaps you would
be better off opening a Service Request in this instance.

Kevin Boyle - Knowledge Partner
If you find this post helpful and are using the web interface,
show your appreciation and click on the star below...