PDA

View Full Version : Alienware Atheros AR81851 and Broadcom BCM4313 not working



dhoover1234
19-Mar-2013, 19:43
Hi

I have installed SUSE on my Aliemware m17r3 and I cannot get either of my networking cards to work.

uname -a
Linux alien 3.0.13-0.27-default #1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b) x86_64 x86_64 x86_64 GNU/Linux

lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series]
01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]
07:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
13:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

hwinfo --netcard
24: PCI 700.0: 0200 Ethernet controller
[Created at pci.323]
UDI: /org/freedesktop/Hal/devices/pci_1969_1083
Unique ID: aK5u.l+zm5Xmnr45
Parent ID: z8Q3.X+FUd6AcMZE
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:07:00.0
SysFS BusID: 0000:07:00.0
Hardware Class: network
Model: "Atheros Ethernet controller"
Vendor: pci 0x1969 "Atheros Communications"
Device: pci 0x1083
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0490
Revision: 0xc0
Memory Range: 0xc7400000-0xc743ffff (rw,non-prefetchable)
I/O Ports: 0x4000-0x4fff (rw)
IRQ: 10 (no events)
Module Alias: "pci:v00001969d00001083sv00001028sd00000490bc02sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)

25: PCI d00.0: 0280 Network controller
[Created at pci.323]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4727
Unique ID: fSIl.jhn_u_Gejx4
Parent ID: hoOk.bf1UYOeQT50
SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:0d:00.0
SysFS BusID: 0000:0d:00.0
Hardware Class: network
Model: "Broadcom Network controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4727
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0010
Revision: 0x01
Memory Range: 0xc6400000-0xc6403fff (rw,non-prefetchable)
IRQ: 11 (no events)
Module Alias: "pci:v000014E4d00004727sv00001028sd00000010bc02sc80 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

modinfo atl1e
filename: /lib/modules/3.0.13-0.27-default/kernel/drivers/net/atl1e/atl1e.ko
version: 1.0.0.7-NAPI
license: GPL
description: Atheros 1000M Ethernet Network Driver
author: Atheros Corporation, <xiong.huang@atheros.com>, Jie Yang <jie.yang@atheros.com>
srcversion: 8C54D44E579979EF1C2E599
alias: pci:v00001969d00001066sv*sd*bc*sc*i*
alias: pci:v00001969d00001026sv*sd*bc*sc*i*
depends:
supported: yes
vermagic: 3.0.13-0.27-default SMP mod_unload modversions
parm: tx_desc_cnt:Transmit description count (array of int)
parm: rx_mem_size:memory size of rx buffer(KB) (array of int)
parm: media_type:MediaType Select (array of int)
parm: int_mod_timer:Interrupt Moderator Timer (array of int)


when I do:

sudo depmod
sudo modprobe atl1e

lsmod finds it..

But
ifconfig eth0 up
eth0: unknown interface: No such device

and their is no wlan0 for the broadcom card either???

Where did I go wrong?

malcolmlewis
19-Mar-2013, 21:47
On Tue 19 Mar 2013 06:44:01 PM CDT, dhoover1234 wrote:
Hi

I have installed SUSE on my Aliemware m17r3 and I cannot get either of
my networking cards to work.

Hi
Your ethernet uses the atl1c not the e variant. If you look at the
output from dmesg, is it asking about firmware? Also is the
kernel-firmware package installed?

You will need to go into YaST network devices and configure up your
network ethernet card to change the module.

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.3 (x86_64) Kernel 3.7.10-1.1-desktop
up 2 days 0:14, 3 users, load average: 0.17, 0.10, 0.06
CPU Intel® i5 CPU M520@2.40GHz | GPU Intel® Ironlake Mobile

dhoover1234
21-Mar-2013, 05:56
Hi Malcolm

Yes kernel drivers is installed. In /lib/firmware I have an ath3k-1.fw and a ath6k/AR6002 and AR6003 file...

Where do I get atl1c from?

YAST gives me this error:
Unable to configure network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.

but dmesg does not give me any ethernet or wlan messages:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.13-0.27-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b)
[ 0.000000] Command line: root=/dev/disk/by-id/ata-Samsung_SSD_840_Series_S14GNYACB03873P-part2 resume=/dev/disk/by-id/ata-Samsung_SSD_840_Series_S14GNYACB03873P-part1 splash=silent crashkernel=256M-:128M vga=0x31a
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000094400 (usable)
[ 0.000000] BIOS-e820: 0000000000094400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000045fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Alienware M17xR3/M17xR3, BIOS A05 06/24/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x45fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-protect
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask E00000000 write-back
[ 0.000000] 7 base 400000000 mask FC0000000 write-back
[ 0.000000] 8 base 440000000 mask FF0000000 write-back
[ 0.000000] 9 base 450000000 mask FF0000000 write-back
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000
[ 0.000000] 0000000000 - 009d000000 page 2M
[ 0.000000] kernel direct mapping tables up to 9d000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000045fe00000
[ 0.000000] 0100000000 - 045fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 45fe00000 @ 9ce2c000-9ce3f000
[ 0.000000] RAMDISK: 377df000 - 37ff0000
[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 17918MB)
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ALWARE)
[ 0.000000] ACPI: XSDT 000000009cffe120 0009C (v01 ALWARE ALIENWRE 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009cffa000 000F4 (v04 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: DSDT 000000009cfee000 08E87 (v01 ALWARE ALIENWRE 00000000 ASL 00040000)
[ 0.000000] ACPI: FACS 000000009cf6c000 00040
[ 0.000000] ACPI: SLIC 000000009cffd000 00176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: OSFR 000000009cffc000 00070 (v01 ALWARE ALIENWRE 27D60B15 ASL 00040000)
[ 0.000000] ACPI: ASF! 000000009cffb000 000A5 (v32 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: HPET 000000009cff9000 00038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: APIC 000000009cff8000 0008C (v02 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: MCFG 000000009cff7000 0003C (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 000000009cfec000 01068 (v01 INSYDE INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000009cfea000 00028 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: ASPT 000000009cfe7000 00034 (v07 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 000000009cfe6000 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfe5000 00996 (v01 PmRef CpuPm 00003000 INTL 20100121)
[ 0.000000] ACPI: DMAR 000000009cfe4000 000E8 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 000000009cfe2000 01E3F (v01 AmdRef AmdTabl 00001000 INTL 20100121)
[ 0.000000] ACPI: WDTT 000000009cfe1000 00224 (v02 ALWARE ALIENWRE 00000001 ASL 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000045fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000045fe00000
[ 0.000000] NODE_DATA [000000045fdd9000 - 000000045fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000f5fffff] PMD -> [ffff88044f400000-ffff88045d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0045fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000094
[ 0.000000] 0: 0x00000100 -> 0x0009ce3f
[ 0.000000] 0: 0x0009cfff -> 0x0009d000
[ 0.000000] 0: 0x00100000 -> 0x0045fe00
[ 0.000000] On node 0 totalpages: 4180932
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 624248 pages, LIFO batch:31
[ 0.000000] Normal zone: 48377 pages used for memmap
[ 0.000000] Normal zone: 3490055 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000094000 - 0000000000095000
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
[ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
[ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
[ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88045fa00000 s74880 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s74880 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4118214
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Samsung_SSD_840_Series_S14GNYACB03873P-part2 resume=/dev/disk/by-id/ata-Samsung_SSD_840_Series_S14GNYACB03873P-part1 splash=silent crashkernel=256M-:128M vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] Memory: 16269260k/18348032k available (4405k kernel code, 1624304k absent, 454468k reserved, 7781k data, 1356k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:262400 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2292.653 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4585.30 BogoMIPS (lpj=9170612)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000187] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.000363] Security Framework initialized
[ 0.000378] AppArmor: AppArmor initialized
[ 0.001782] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.005351] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006823] Mount-cache hash table entries: 256
[ 0.006953] Initializing cgroup subsys cpuacct
[ 0.006958] Initializing cgroup subsys memory
[ 0.006973] Initializing cgroup subsys devices
[ 0.006976] Initializing cgroup subsys freezer
[ 0.006978] Initializing cgroup subsys net_cls
[ 0.006980] Initializing cgroup subsys blkio
[ 0.006987] Initializing cgroup subsys perf_event
[ 0.007032] CPU: Physical Processor ID: 0
[ 0.007034] CPU: Processor Core ID: 0
[ 0.007040] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007041] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007045] mce: CPU supports 9 MCE banks
[ 0.007057] CPU0: Thermal monitoring handled by SMI
[ 0.007066] using mwait in idle threads.
[ 0.008266] ACPI: Core revision 20110413
[ 0.028874] DMAR: Host address width 36
[ 0.028878] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.028885] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.028889] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028895] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.028898] DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
[ 0.028901] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.028903] DMAR: No ATSR found
[ 0.028973] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.028976] HPET id 0 under DRHD base 0xfed91000
[ 0.028978] HPET id 0 under DRHD base 0xfed91000
[ 0.028980] HPET id 0 under DRHD base 0xfed91000
[ 0.028982] HPET id 0 under DRHD base 0xfed91000
[ 0.028984] HPET id 0 under DRHD base 0xfed91000
[ 0.028986] HPET id 0 under DRHD base 0xfed91000
[ 0.028988] HPET id 0 under DRHD base 0xfed91000
[ 0.028990] HPET id 0 under DRHD base 0xfed91000
[ 0.029168] Enabled IRQ remapping in x2apic mode
[ 0.029171] Enabling x2apic
[ 0.029172] Enabled x2apic
[ 0.029178] Switched APIC routing to cluster x2apic.
[ 0.029594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069222] CPU0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz stepping 07
[ 0.175903] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.175911] ... version: 3
[ 0.175912] ... bit width: 48
[ 0.175914] ... generic registers: 4
[ 0.175916] ... value mask: 0000ffffffffffff
[ 0.175919] ... max period: 000000007fffffff
[ 0.175921] ... fixed-purpose events: 3
[ 0.175923] ... event mask: 000000070000000f
[ 0.176053] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.176148] Booting Node 0, Processors #1
[ 0.176152] smpboot cpu 1: start_ip = 8f000
[ 0.187354] CPU1: Thermal monitoring handled by SMI
[ 0.207434] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.207539] #2
[ 0.207541] smpboot cpu 2: start_ip = 8f000
[ 0.218479] CPU2: Thermal monitoring handled by SMI
[ 0.238548] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.238652] #3
[ 0.238654] smpboot cpu 3: start_ip = 8f000
[ 0.249591] CPU3: Thermal monitoring handled by SMI
[ 0.269659] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.269759] #4
[ 0.269761] smpboot cpu 4: start_ip = 8f000
[ 0.280699] CPU4: Thermal monitoring handled by SMI
[ 0.300766] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.300870] #5
[ 0.300872] smpboot cpu 5: start_ip = 8f000
[ 0.311808] CPU5: Thermal monitoring handled by SMI
[ 0.331877] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.331980] #6
[ 0.331981] smpboot cpu 6: start_ip = 8f000
[ 0.342919] CPU6: Thermal monitoring handled by SMI
[ 0.362987] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.363088] #7 Ok.
[ 0.363090] smpboot cpu 7: start_ip = 8f000
[ 0.374027] CPU7: Thermal monitoring handled by SMI
[ 0.394094] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.394126] Brought up 8 CPUs
[ 0.394129] Total of 8 processors activated (36682.44 BogoMIPS).
[ 0.399986] devtmpfs: initialized
[ 0.403597] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)
[ 0.403764] print_constraints: dummy:
[ 0.403792] Time: 8:08:18 Date: 03/14/13
[ 0.403853] NET: Registered protocol family 16
[ 0.403986] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.403990] ACPI: bus type pci registered
[ 0.404060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.404065] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.440960] PCI: Using configuration type 1 for base access
[ 0.441845] bio: create slab <bio-0> at 0
[ 0.443821] ACPI: EC: Look up EC in DSDT
[ 0.445643] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.471546] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.472170] ACPI: SSDT 000000009ce90698 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.472662] ACPI: Dynamic OEM Table Load:
[ 0.472666] ACPI: SSDT (null) 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.483855] ACPI: SSDT 000000009ce91a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.484403] ACPI: Dynamic OEM Table Load:
[ 0.484406] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.495626] ACPI: SSDT 000000009ce8fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.496108] ACPI: Dynamic OEM Table Load:
[ 0.496111] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.547918] ACPI: Interpreter enabled
[ 0.547922] ACPI: (supports S0 S3 S4 S5)
[ 0.547950] ACPI: Using IOAPIC for interrupt routing
[ 0.616207] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.631712] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.631717] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.632171] \_SB_.PCI0:_OSC invalid UUID
[ 0.632172] _OSC request data:1 8 1f
[ 0.632175] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.632957] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.632960] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.632963] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.632968] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 0.632980] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.633013] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.633036] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.633039] pci 0000:00:01.0: PME# disabled
[ 0.633057] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 0.633067] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.633073] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.633078] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
[ 0.633125] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.633148] pci 0000:00:16.0: reg 10: [mem 0xc9404000-0xc940400f 64bit]
[ 0.633208] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.633212] pci 0000:00:16.0: PME# disabled
[ 0.633243] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.633570] pci 0000:00:1a.0: reg 10: [mem 0xc940a000-0xc940a3ff]
[ 0.635437] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.635441] pci 0000:00:1a.0: PME# disabled
[ 0.635464] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.635479] pci 0000:00:1b.0: reg 10: [mem 0xc9400000-0xc9403fff 64bit]
[ 0.635532] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.635536] pci 0000:00:1b.0: PME# disabled
[ 0.635556] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.635616] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.635619] pci 0000:00:1c.0: PME# disabled
[ 0.635643] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 0.635703] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.635707] pci 0000:00:1c.2: PME# disabled
[ 0.635729] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.635789] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.635793] pci 0000:00:1c.3: PME# disabled
[ 0.635822] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.635923] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.635927] pci 0000:00:1c.5: PME# disabled
[ 0.635963] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.636280] pci 0000:00:1d.0: reg 10: [mem 0xc9409000-0xc94093ff]
[ 0.638149] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.638153] pci 0000:00:1d.0: PME# disabled
[ 0.638176] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[ 0.638287] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
[ 0.638305] pci 0000:00:1f.2: reg 10: [io 0x6088-0x608f]
[ 0.638312] pci 0000:00:1f.2: reg 14: [io 0x609c-0x609f]
[ 0.638320] pci 0000:00:1f.2: reg 18: [io 0x6080-0x6087]
[ 0.638327] pci 0000:00:1f.2: reg 1c: [io 0x6098-0x609b]
[ 0.638335] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
[ 0.638342] pci 0000:00:1f.2: reg 24: [mem 0xc9408000-0xc94087ff]
[ 0.638373] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.638376] pci 0000:00:1f.2: PME# disabled
[ 0.638392] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.638407] pci 0000:00:1f.3: reg 10: [mem 0xc9406000-0xc94060ff 64bit]
[ 0.638427] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f]
[ 0.638485] pci 0000:01:00.0: [1002:68a8] type 0 class 0x000300
[ 0.638505] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.638520] pci 0000:01:00.0: reg 18: [mem 0xc8400000-0xc841ffff 64bit]
[ 0.638531] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
[ 0.638551] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.638578] pci 0000:01:00.0: supports D1 D2
[ 0.638609] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.638628] pci 0000:01:00.1: reg 10: [mem 0xc8420000-0xc8423fff 64bit]
[ 0.638699] pci 0000:01:00.1: supports D1 D2
[ 0.638730] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.638734] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.638737] pci 0000:00:01.0: bridge window [mem 0xc8400000-0xc93fffff]
[ 0.638740] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.638854] pci 0000:07:00.0: [1969:1083] type 0 class 0x000200
[ 0.638940] pci 0000:07:00.0: reg 10: [mem 0xc7400000-0xc743ffff 64bit]
[ 0.638985] pci 0000:07:00.0: reg 18: [io 0x4000-0x407f]
[ 0.639316] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.639330] pci 0000:07:00.0: PME# disabled
[ 0.639433] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.639437] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.639441] pci 0000:00:1c.0: bridge window [mem 0xc7400000-0xc83fffff]
[ 0.639447] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.639547] pci 0000:0d:00.0: [14e4:4727] type 0 class 0x000280
[ 0.639575] pci 0000:0d:00.0: reg 10: [mem 0xc6400000-0xc6403fff 64bit]
[ 0.639687] pci 0000:0d:00.0: supports D1 D2
[ 0.639689] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.639694] pci 0000:0d:00.0: PME# disabled
[ 0.639741] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[ 0.639745] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.639749] pci 0000:00:1c.2: bridge window [mem 0xc6400000-0xc73fffff]
[ 0.639755] pci 0000:00:1c.2: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.639821] pci 0000:13:00.0: [10ec:5209] type 0 class 0x00ff00
[ 0.639841] pci 0000:13:00.0: reg 10: [mem 0xc5401000-0xc5401fff]
[ 0.639960] pci 0000:13:00.0: supports D1 D2
[ 0.639962] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[ 0.639967] pci 0000:13:00.0: PME# disabled
[ 0.640015] pci 0000:13:00.1: [10ec:5209] type 0 class 0x000805
[ 0.640035] pci 0000:13:00.1: reg 10: [mem 0xc5400000-0xc54000ff]
[ 0.640154] pci 0000:13:00.1: supports D1 D2
[ 0.640155] pci 0000:13:00.1: PME# supported from D1 D2 D3hot
[ 0.640160] pci 0000:13:00.1: PME# disabled
[ 0.640215] pci 0000:00:1c.3: PCI bridge to [bus 13-18]
[ 0.640220] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.640224] pci 0000:00:1c.3: bridge window [mem 0xc5400000-0xc63fffff]
[ 0.640230] pci 0000:00:1c.3: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.640376] pci 0000:19:00.0: [1033:0194] type 0 class 0x000c03
[ 0.640404] pci 0000:19:00.0: reg 10: [mem 0xc4400000-0xc4401fff 64bit]
[ 0.640515] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
[ 0.640522] pci 0000:19:00.0: PME# disabled
[ 0.640570] pci 0000:00:1c.5: PCI bridge to [bus 19-1e]
[ 0.640574] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 0.640578] pci 0000:00:1c.5: bridge window [mem 0xc4400000-0xc53fffff]
[ 0.640584] pci 0000:00:1c.5: bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
[ 0.640607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.640801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.640847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.640888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.640931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.640986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.641086] \_SB_.PCI0:_OSC invalid UUID
[ 0.641087] _OSC request data:1 1f 1f
[ 0.641090] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.641137] \_SB_.PCI0:_OSC invalid UUID
[ 0.641138] _OSC request data:1 0 1d
[ 0.641141] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.641144] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.646498] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.646561] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.646622] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.646680] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.646740] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.646802] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.646862] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.646920] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.646987] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.646997] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=no ne
[ 0.647003] vgaarb: loaded
[ 0.647086] PCI: Using ACPI for IRQ routing
[ 0.654118] PCI: pci_cache_line_size set to 64 bytes
[ 0.654192] reserve RAM buffer: 0000000000094400 - 000000000009ffff
[ 0.654195] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff
[ 0.654198] reserve RAM buffer: 000000009d000000 - 000000009fffffff
[ 0.654200] reserve RAM buffer: 000000045fe00000 - 000000045fffffff
[ 0.654281] NetLabel: Initializing
[ 0.654284] NetLabel: domain hash size = 128
[ 0.654286] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.654297] NetLabel: unlabeled traffic allowed by default
[ 0.654307] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.654313] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.656329] Switching to clocksource hpet
[ 0.657056] Switched to NOHz mode on CPU #3
[ 0.657594] AppArmor: AppArmor Filesystem Enabled
[ 0.657616] pnp: PnP ACPI init
[ 0.657627] ACPI: bus type pnp registered
[ 0.657683] Switched to NOHz mode on CPU #7
[ 0.657892] Switched to NOHz mode on CPU #2
[ 0.658048] pnp 00:00: [bus 00-fe]
[ 0.658050] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.658052] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.658054] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.658056] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.658058] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.658059] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.658061] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.658063] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.658065] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.658067] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.658069] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.658070] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.658072] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.658074] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.658076] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.658078] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.658080] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.658082] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 0.658132] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.658148] pnp 00:01: [io 0x0000-0x001f]
[ 0.658149] pnp 00:01: [io 0x0081-0x0091]
[ 0.658151] pnp 00:01: [io 0x0093-0x009f]
[ 0.658153] pnp 00:01: [io 0x00c0-0x00df]
[ 0.658155] pnp 00:01: [dma 4]
[ 0.658175] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.658184] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.658201] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.658286] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.658306] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.658317] pnp 00:04: [io 0x00f0]
[ 0.658328] pnp 00:04: [irq 13]
[ 0.658348] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.658360] pnp 00:05: [io 0x002e-0x002f]
[ 0.658362] pnp 00:05: [io 0x004e-0x004f]
[ 0.658363] pnp 00:05: [io 0x0061]
[ 0.658364] pnp 00:05: [io 0x0063]
[ 0.658366] pnp 00:05: [io 0x0065]
[ 0.658367] pnp 00:05: [io 0x0067]
[ 0.658369] pnp 00:05: [io 0x0070]
[ 0.658370] pnp 00:05: [io 0x0080]
[ 0.658371] pnp 00:05: [io 0x0092]
[ 0.658373] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.658374] pnp 00:05: [io 0x0680-0x069f]
[ 0.658376] pnp 00:05: [io 0x0800-0x080f]
[ 0.658377] pnp 00:05: [io 0x0810-0x0813]
[ 0.658379] pnp 00:05: [io 0xffff]
[ 0.658381] pnp 00:05: [io 0x0400-0x0453]
[ 0.658382] pnp 00:05: [io 0x0458-0x047f]
[ 0.658384] pnp 00:05: [io 0x0500-0x057f]
[ 0.658385] pnp 00:05: [io 0x164e-0x164f]
[ 0.658387] pnp 00:05: [io 0xff2c-0xff2f]
[ 0.658400] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff]
[ 0.658434] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.658438] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.658441] system 00:05: [io 0x0810-0x0813] has been reserved
[ 0.658444] system 00:05: [io 0xffff] has been reserved
[ 0.658447] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.658451] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.658454] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.658457] system 00:05: [io 0xff2c-0xff2f] has been reserved
[ 0.658460] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.658470] pnp 00:06: [io 0x0070-0x0077]
[ 0.658476] pnp 00:06: [irq 8]
[ 0.658496] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.658523] Switched to NOHz mode on CPU #6
[ 0.658530] pnp 00:07: [io 0x0454-0x0457]
[ 0.658564] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.658568] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.658736] Switched to NOHz mode on CPU #1
[ 0.659174] Switched to NOHz mode on CPU #0
[ 0.659367] Switched to NOHz mode on CPU #5
[ 0.660209] Switched to NOHz mode on CPU #4
[ 0.676382] pnp 00:08: [io 0x0060]
[ 0.676387] pnp 00:08: [io 0x0064]
[ 0.676406] pnp 00:08: [irq 1]
[ 0.676434] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.676455] pnp 00:09: [irq 12]
[ 0.676481] pnp 00:09: Plug and Play ACPI device, IDs DLL0490 PNP0f13 (active)
[ 0.676509] pnp 00:0a: [irq 20]
[ 0.676532] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
[ 0.676667] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.676669] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 0.676671] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 0.676673] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 0.676675] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.676676] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 0.676678] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 0.676681] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.676682] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 0.676684] pnp 00:0b: [mem 0x9fa00000-0x9fa00fff]
[ 0.676729] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.676734] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.676737] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.676740] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.676744] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.676747] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.676751] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.676754] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.676758] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.676761] system 00:0b: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.676765] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.677102] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 0.677104] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 0.677159] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.677163] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.677166] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.677186] pnp: PnP ACPI: found 13 devices
[ 0.677188] ACPI: ACPI bus type pnp unregistered
[ 0.682866] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.682874] PCI: max bus depth: 1 pci_try_num: 2
[ 0.682909] pci 0000:01:00.0: BAR 6: assigned [mem 0xc8440000-0xc845ffff pref]
[ 0.682913] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.682916] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.682920] pci 0000:00:01.0: bridge window [mem 0xc8400000-0xc93fffff]
[ 0.682924] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.682929] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.682933] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.682938] pci 0000:00:1c.0: bridge window [mem 0xc7400000-0xc83fffff]
[ 0.682943] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.682951] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[ 0.682954] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.682960] pci 0000:00:1c.2: bridge window [mem 0xc6400000-0xc73fffff]
[ 0.682965] pci 0000:00:1c.2: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.682972] pci 0000:00:1c.3: PCI bridge to [bus 13-18]
[ 0.682975] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.682981] pci 0000:00:1c.3: bridge window [mem 0xc5400000-0xc63fffff]
[ 0.682986] pci 0000:00:1c.3: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.682993] pci 0000:00:1c.5: PCI bridge to [bus 19-1e]
[ 0.682997] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 0.683002] pci 0000:00:1c.5: bridge window [mem 0xc4400000-0xc53fffff]
[ 0.683007] pci 0000:00:1c.5: bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
[ 0.683027] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.683031] pci 0000:00:01.0: setting latency timer to 64
[ 0.683041] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.683045] pci 0000:00:1c.0: setting latency timer to 64
[ 0.683055] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.683060] pci 0000:00:1c.2: setting latency timer to 64
[ 0.683070] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.683075] pci 0000:00:1c.3: setting latency timer to 64
[ 0.683080] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.683085] pci 0000:00:1c.5: setting latency timer to 64
[ 0.683088] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.683090] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.683092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.683094] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.683096] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.683097] pci_bus 0000:01: resource 1 [mem 0xc8400000-0xc93fffff]
[ 0.683099] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.683101] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.683103] pci_bus 0000:07: resource 1 [mem 0xc7400000-0xc83fffff]
[ 0.683105] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.683107] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.683109] pci_bus 0000:0d: resource 1 [mem 0xc6400000-0xc73fffff]
[ 0.683110] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.683112] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
[ 0.683114] pci_bus 0000:13: resource 1 [mem 0xc5400000-0xc63fffff]
[ 0.683116] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.683118] pci_bus 0000:19: resource 0 [io 0x1000-0x1fff]
[ 0.683120] pci_bus 0000:19: resource 1 [mem 0xc4400000-0xc53fffff]
[ 0.683121] pci_bus 0000:19: resource 2 [mem 0xc3400000-0xc43fffff 64bit pref]
[ 0.683240] NET: Registered protocol family 2
[ 0.683661] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.684850] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.686034] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.686176] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.686179] TCP reno registered
[ 0.686204] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.686274] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.686458] NET: Registered protocol family 1
[ 0.686474] pci 0000:00:02.0: Boot video device
[ 0.716328] PCI: CLS 64 bytes, default 64
[ 0.716381] Unpacking initramfs...
[ 0.852944] Freeing initrd memory: 8260k freed
[ 0.853901] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.853909] Placing 64MB software IO TLB between ffff880098e2c000 - ffff88009ce2c000
[ 0.853912] software IO TLB at phys 0x98e2c000 - 0x9ce2c000
[ 0.853940] Simple Boot Flag at 0x44 set to 0x1
[ 0.854747] audit: initializing netlink socket (disabled)
[ 0.854762] type=2000 audit(1363248497.620:1): initialized
[ 0.873041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.874413] VFS: Disk quotas dquot_6.5.2
[ 0.874452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.874552] msgmni has been set to 7948
[ 0.874647] alg: No test for stdrng (krng)
[ 0.874681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.874706] io scheduler noop registered
[ 0.874709] io scheduler deadline registered
[ 0.874748] io scheduler cfq registered (default)
[ 0.874850] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.874879] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.875134] vesafb: mode is 1280x1024x16, linelength=2560, pages=11
[ 0.875137] vesafb: scrolling: redraw
[ 0.875140] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.875923] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90012680000, using 5120k, total 32704k
[ 0.876053] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.876055] bootsplash: silentjpeg size 59221 bytes
[ 0.885595] bootsplash: silentjpeg size 74123 bytes
[ 0.901019] bootsplash: ...found (1280x1024, 40629 bytes, v3).
[ 0.981751] Console: switching to colour frame buffer device 156x60
[ 1.062229] fb0: VESA VGA frame buffer device
[ 1.062241] intel_idle: MWAIT substates: 0x21120
[ 1.062242] intel_idle: v0.4 model 0x2A
[ 1.062244] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.062350] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.200356] Non-volatile memory driver v1.3
[ 1.200360] Linux agpgart interface v0.103
[ 1.200427] Fixed MDIO Bus: probed
[ 1.200476] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.233427] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.233433] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.233480] mousedev: PS/2 mouse device common for all mice
[ 1.233854] cpuidle: using governor ladder
[ 1.236052] cpuidle: using governor menu
[ 1.236055] EFI Variables Facility v0.08 2004-May-17
[ 1.236222] TCP cubic registered
[ 1.236238] Registering the dns_resolver key type
[ 1.236313] PM: Checking hibernation image partition /dev/disk/by-id/ata-Samsung_SSD_840_Series_S14GNYACB03873P-part1
[ 1.270274] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.270307] PM: Hibernation image not present or could not be loaded.
[ 1.270321] registered taskstats version 1
[ 1.271700] Magic number: 5:942:118
[ 1.274428] Freeing unused kernel memory: 1356k freed
[ 1.274579] Write protecting the kernel read-only data: 10240k
[ 1.279247] Freeing unused kernel memory: 1720k freed
[ 1.287759] Freeing unused kernel memory: 1032k freed
[ 1.327297] SCSI subsystem initialized
[ 1.328847] libata version 3.00 loaded.
[ 1.329611] ahci 0000:00:1f.2: version 3.0
[ 1.329624] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.329671] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.329693] ahci: SSS flag set, parallel bus scan disabled
[ 1.343347] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl RAID mode
[ 1.343354] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.343360] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.367720] scsi0 : ahci
[ 1.367963] scsi1 : ahci
[ 1.368089] scsi2 : ahci
[ 1.368215] scsi3 : ahci
[ 1.368342] scsi4 : ahci
[ 1.368468] scsi5 : ahci
[ 1.368761] ata1: SATA max UDMA/133 abar m2048@0xc9408000 port 0xc9408100 irq 43
[ 1.368766] ata2: SATA max UDMA/133 abar m2048@0xc9408000 port 0xc9408180 irq 43
[ 1.368833] ata3: SATA max UDMA/133 abar m2048@0xc9408000 port 0xc9408200 irq 43
[ 1.368896] ata4: DUMMY
[ 1.368958] ata5: SATA max UDMA/133 abar m2048@0xc9408000 port 0xc9408300 irq 43
[ 1.369021] ata6: DUMMY
[ 1.686875] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.687819] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.687974] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[ 1.688043] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.688438] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.688581] ata1.00: configured for UDMA/133
[ 1.694987] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
[ 1.870606] Refined TSC clocksource calibration: 2292.553 MHz.
[ 1.870693] Switching to clocksource tsc
[ 2.014318] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.015105] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.015293] ata2.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[ 2.015362] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.015780] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.015977] ata2.00: configured for UDMA/133
[ 2.025309] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
[ 2.341878] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.342371] ata3.00: ATAPI: PLDS DVD+/-RW DC-8A2SH, 3D12, max UDMA/100
[ 2.343628] ata3.00: configured for UDMA/100
[ 2.346727] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DC-8A2SH 3D12 PQ: 0 ANSI: 5
[ 2.665349] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.670773] hp_sw: device handler registered
[ 2.677164] rdac: device handler registered
[ 2.680914] emc: device handler registered
[ 2.687121] alua: device handler registered
[ 2.690019] udev: starting version 147
[ 2.697856] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.698091] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.698353] ACPI: acpi_idle yielding to intel_idle
[ 2.700033] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 2.700249] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 2.701833] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0C:00/input/input1
[ 2.701989] ACPI: Power Button [PWRB]
[ 2.702143] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0E:00/input/input2
[ 2.702279] ACPI: Sleep Button [SLPB]
[ 2.702448] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 2.702630] ACPI: Lid Switch [LID0]
[ 2.705732] usbcore: registered new interface driver usbfs
[ 2.705860] usbcore: registered new interface driver hub
[ 2.710957] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.711149] sd 0:0:0:0: [sda] Write Protect is off
[ 2.711255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.711285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.711635] usbcore: registered new device driver usb
[ 2.711716] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.711963] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.712080] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.712134] sda: sda1 sda2 sda3
[ 2.712218] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.712659] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.713328] sdb: sdb1 sdb2
[ 2.713726] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.715159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.715247] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.715330] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.715334] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.715416] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.715506] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.719450] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.719468] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc940a000
[ 2.723624] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.723767] ACPI: Power Button [PWRF]
[ 2.737405] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.737524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.737590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.737654] usb usb1: Product: EHCI Host Controller
[ 2.737717] usb usb1: Manufacturer: Linux 3.0.13-0.27-default ehci_hcd
[ 2.737811] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.738023] hub 1-0:1.0: USB hub found
[ 2.738130] hub 1-0:1.0: 2 ports detected
[ 2.738314] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.738446] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.738450] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.738561] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.738696] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.742668] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.742685] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc9409000
[ 2.757265] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.757384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.757448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.757511] usb usb2: Product: EHCI Host Controller
[ 2.757573] usb usb2: Manufacturer: Linux 3.0.13-0.27-default ehci_hcd
[ 2.757635] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.757769] hub 2-0:1.0: USB hub found
[ 2.757833] hub 2-0:1.0: 2 ports detected
[ 2.920189] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400
[ 2.923539] [drm] Initialized drm 1.1.0 20060810
[ 2.926503] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.926570] i915 0000:00:02.0: setting latency timer to 64
[ 2.970098] mtrr: no more MTRRs available
[ 2.970162] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.970408] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.970412] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.970491] [drm] Driver supports precise vblank timestamp query.
[ 2.970721] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:ow ns=io+mem
[ 2.970785] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 3.044117] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.056816] [drm] failed to retrieve link info, disabling eDP
[ 3.056833] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.189066] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.189172] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.189413] hub 1-1:1.0: USB hub found
[ 3.189650] hub 1-1:1.0: 6 ports detected
[ 3.300476] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.432700] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.432809] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.433047] hub 2-1:1.0: USB hub found
[ 3.433284] hub 2-1:1.0: 8 ports detected
[ 3.504348] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 3.600166] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8187
[ 3.600234] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.600298] usb 1-1.1: Product: DW375 Bluetooth Module
[ 3.600359] usb 1-1.1: Manufacturer: Dell Computer Corp
[ 3.600421] usb 1-1.1: SerialNumber: D0DF9A3D0CFA
[ 3.704012] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[ 3.728671] checking generic (b0000000 1ff0000) vs hw (b0000000 10000000)
[ 3.728674] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.728754] Console: switching to colour dummy device 80x25
[ 3.729268] fbcon: inteldrmfb (fb0) is primary device
[ 3.803906] usb 2-1.4: New USB device found, idVendor=05ca, idProduct=181a
[ 3.803914] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.803919] usb 2-1.4: Product: Laptop_Integrated_Webcam_3M
[ 3.803923] usb 2-1.4: Manufacturer: CN0PYVWX7248716K03HDA00
[ 3.875798] usb 2-1.7: new full-speed USB device number 4 using ehci_hcd
[ 3.917659] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 3.968367] usb 2-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 3.969486] usb 2-1.7: New USB device found, idVendor=187c, idProduct=0520
[ 3.969489] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.969491] usb 2-1.7: Product: M17xR3
[ 3.969492] usb 2-1.7: Manufacturer: Alienware Gaming
[ 3.969493] usb 2-1.7: SerialNumber: 1.0.3
[ 3.974057] generic-usb 0003:187C:0520.0001: hiddev0,hidraw0: USB HID v1.01 Device [Alienware Gaming M17xR3] on usb-0000:00:1d.0-1.7/input0
[ 3.974068] usbcore: registered new interface driver usbhid
[ 3.974070] usbhid: USB HID core driver
[ 4.112259] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 4.155772] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 4.350385] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 4.380574] Console: switching to colour frame buffer device 236x63
[ 4.394159] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 4.588716] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 4.618781] fb0: inteldrmfb frame buffer device
[ 4.618784] drm: registered panic notifier
[ 4.619027] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.620048] ACPI Warning: _BQC returned an invalid level (20110413/video-472)
[ 4.620586] acpi LNXVIDEO:02: registered as cooling_device8
[ 4.620912] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input6
[ 4.620973] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.621120] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621130] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621137] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621145] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621152] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621159] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.621166] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 4.622573] acpi device:34: registered as cooling_device9
[ 4.622823] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input7
[ 4.622866] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.622908] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.631568] [drm] radeon defaulting to kernel modesetting.
[ 4.631663] [drm] radeon kernel modesetting enabled.
[ 4.631789] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.631881] radeon 0000:01:00.0: setting latency timer to 64
[ 4.631993] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68A8 0x1028:0x04BA).
[ 4.632116] [drm] register mmio base: 0xC8400000
[ 4.632204] [drm] register mmio size: 131072
[ 4.790973] ATOM BIOS: AMD
[ 4.791080] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 4.791170] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 4.791263] mtrr: no more MTRRs available
[ 4.791350] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 4.791437] [drm] RAM width 128bits DDR
[ 4.791587] [TTM] Zone kernel: Available graphics memory: 8140814 kiB.
[ 4.791676] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 4.791763] [TTM] Initializing pool allocator.
[ 4.791863] [drm] radeon: 1024M of VRAM memory ready
[ 4.791951] [drm] radeon: 512M of GTT memory ready.
[ 4.792045] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.792132] [drm] Driver supports precise vblank timestamp query.
[ 4.792255] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 4.792260] radeon 0000:01:00.0: radeon: using MSI.
[ 4.792375] [drm] radeon: irq initialized.
[ 4.792464] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.792839] [drm] Loading JUNIPER Microcode
[ 4.805933] radeon 0000:01:00.0: WB enabled
[ 4.822241] [drm] ring test succeeded in 1 usecs
[ 4.822425] [drm] radeon: ib pool ready.
[ 4.822564] [drm] ib test succeeded in 0 usecs
[ 4.823115] [drm] Radeon Display Connectors
[ 4.823204] [drm] Connector 0:
[ 4.823290] [drm] LVDS
[ 4.823377] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 4.823464] [drm] Encoders:
[ 4.823550] [drm] LCD1: INTERNAL_UNIPHY
[ 4.823637] [drm] Connector 1:
[ 4.823723] [drm] DisplayPort
[ 4.823808] [drm] HPD2
[ 4.823894] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 4.823980] [drm] Encoders:
[ 4.824065] [drm] DFP1: INTERNAL_UNIPHY1
[ 4.824150] [drm] Connector 2:
[ 4.824235] [drm] HDMI-A
[ 4.824320] [drm] HPD1
[ 4.824405] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 4.824491] [drm] Encoders:
[ 4.824577] [drm] DFP2: INTERNAL_UNIPHY1
[ 4.824662] [drm] Connector 3:
[ 4.824747] [drm] HDMI-A
[ 4.824831] [drm] HPD3
[ 4.824916] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 4.825002] [drm] Encoders:
[ 4.825086] [drm] DFP3: INTERNAL_UNIPHY2
[ 4.825172] [drm] Connector 4:
[ 4.825255] [drm] VGA
[ 4.825340] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 4.825425] [drm] Encoders:
[ 4.825510] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.835674] [drm] Radeon display connector LVDS-2: No monitor connected or invalid EDID
[ 5.313416] [drm] Radeon display connector DP-4: No monitor connected or invalid EDID
[ 5.323564] [drm] Radeon display connector HDMI-A-4: No monitor connected or invalid EDID
[ 5.333706] [drm] Radeon display connector HDMI-A-5: No monitor connected or invalid EDID
[ 5.343843] [drm] Radeon display connector VGA-2: No monitor connected or invalid EDID
[ 5.343962] [drm] Internal thermal controller with fan control
[ 5.344163] [drm] radeon: power management initialized
[ 5.377676] No connectors reported connected with modes
[ 5.377770] [drm] Cannot find any crtc or sizes - going 1024x768
[ 5.379486] [drm] fb mappable at 0xA0141000
[ 5.379573] [drm] vram apper at 0xA0000000
[ 5.379659] [drm] size 3145728
[ 5.379744] [drm] fb depth is 24
[ 5.379830] [drm] pitch is 4096
[ 5.379965] fb1: radeondrmfb frame buffer device
[ 5.380054] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 1
[ 5.396855] PM: Marking nosave pages: 0000000000094000 - 0000000000100000
[ 5.396859] PM: Marking nosave pages: 000000009ce3f000 - 000000009cfff000
[ 5.396868] PM: Marking nosave pages: 000000009d000000 - 0000000100000000
[ 5.398249] PM: Basic memory bitmaps created
[ 5.450648] PM: Basic memory bitmaps freed
[ 5.450652] video LNXVIDEO:00: Restoring backlight state
[ 5.450954] video LNXVIDEO:09: Restoring backlight state
[ 5.458376] PM: Starting manual resume from disk
[ 5.458466] PM: Hibernation image partition 8:17 present
[ 5.458467] PM: Looking for hibernation image.
[ 5.458638] PM: Image not found (code -22)
[ 5.458639] PM: Hibernation image not present or could not be loaded.
[ 5.615962] kjournald starting. Commit interval 15 seconds
[ 5.616073] EXT3-fs (sdb2): using internal journal
[ 5.616164] EXT3-fs (sdb2): mounted filesystem with ordered data mode
[ 6.133554] udev: starting version 147
[ 6.156407] rtc_cmos 00:06: RTC can wake from S4
[ 6.156709] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 6.156881] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 6.157304] wmi: Mapper loaded
[ 6.161021] iTCO_vendor_support: vendor-support=0
[ 6.161998] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.162237] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.162431] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.163771] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.163955] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.164158] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[ 6.165184] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 6.165922] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.187249] xhci_hcd 0000:19:00.0: setting latency timer to 64
[ 6.187253] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 6.187396] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
[ 6.187696] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 6.187700] xhci_hcd 0000:19:00.0: irq 17, io mem 0xc4400000
[ 6.187782] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
[ 6.187791] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
[ 6.187800] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
[ 6.187808] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
[ 6.187817] xhci_hcd 0000:19:00.0: irq 50 for MSI/MSI-X
[ 6.187825] xhci_hcd 0000:19:00.0: irq 51 for MSI/MSI-X
[ 6.187834] xhci_hcd 0000:19:00.0: irq 52 for MSI/MSI-X
[ 6.187842] xhci_hcd 0000:19:00.0: irq 53 for MSI/MSI-X
[ 6.187975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.187978] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.187981] usb usb3: Product: xHCI Host Controller
[ 6.187983] usb usb3: Manufacturer: Linux 3.0.13-0.27-default xhci_hcd
[ 6.187985] usb usb3: SerialNumber: 0000:19:00.0
[ 6.188090] xHCI xhci_add_endpoint called for root hub
[ 6.188092] xHCI xhci_check_bandwidth called for root hub
[ 6.188129] hub 3-0:1.0: USB hub found
[ 6.188137] hub 3-0:1.0: 2 ports detected
[ 6.188201] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 6.188207] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
[ 6.191100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.191211] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.191323] usb usb4: Product: xHCI Host Controller
[ 6.191443] usb usb4: Manufacturer: Linux 3.0.13-0.27-default xhci_hcd
[ 6.191563] usb usb4: SerialNumber: 0000:19:00.0
[ 6.191775] xHCI xhci_add_endpoint called for root hub
[ 6.191778] xHCI xhci_check_bandwidth called for root hub
[ 6.191801] hub 4-0:1.0: USB hub found
[ 6.191937] hub 4-0:1.0: 2 ports detected
[ 6.211975] Bluetooth: Core ver 2.16
[ 6.212106] NET: Registered protocol family 31
[ 6.212234] Bluetooth: HCI device and connection manager initialized
[ 6.212321] Bluetooth: HCI socket layer initialized
[ 6.212406] Bluetooth: L2CAP socket layer initialized
[ 6.212555] Bluetooth: SCO socket layer initialized
[ 6.218066] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.218331] usbcore: registered new interface driver btusb
[ 6.224062] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.284060] ACPI: AC Adapter [ACAD] (off-line)
[ 6.528013] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.528127] ACPI: Battery Slot [BAT1] (battery present)
[ 6.530483] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 6.532436] sdhci: Secure Digital Host Controller Interface driver
[ 6.532539] sdhci: Copyright(c) Pierre Ossman
[ 6.532639] Linux video capture interface: v2.00
[ 6.532886] NET: Registered protocol family 10
[ 6.534319] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[ 6.534470] sdhci-pci 0000:13:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 6.534637] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6.534771] sdhci-pci 0000:13:00.1: setting latency timer to 64
[ 6.534783] _regulator_get: 0000:13:00.1 supply vmmc not found, using dummy regulator
[ 6.534916] Registered led device: mmc0::
[ 6.534954] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[ 6.535379] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:181a)
[ 6.536824] input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
[ 6.537026] usbcore: registered new interface driver uvcvideo
[ 6.537170] USB Video Class driver (v1.1.0)
[ 6.537968] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 6.538088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.538318] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.543871] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.544034] HDA Intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[ 6.544062] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.086117] ALSA hda_codec.c:4720 autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[ 7.086120] ALSA hda_codec.c:4724 speaker_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 7.086123] ALSA hda_codec.c:4728 hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 7.086125] ALSA hda_codec.c:4729 mono: mono_out=0x0
[ 7.086126] ALSA hda_codec.c:4732 dig-out=0x22/0x0
[ 7.086128] ALSA hda_codec.c:4733 inputs:
[ 7.086130] ALSA hda_codec.c:4737 Mic=0xe
[ 7.086131] ALSA hda_codec.c:4739
[ 7.086485] ALSA patch_sigmatel.c:3111 stac92xx: dac_nids=1 (0x15/0x0/0x0/0x0/0x0)
[ 7.086636] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.089835] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.090249] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[ 7.090665] HDMI status: Pin=7 Presence_Detect=0 ELD_Valid=0
[ 7.116207] input: HDA Intel PCH Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.116374] input: HDA Intel PCH Line Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.116534] input: HDA Intel PCH HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.116861] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 7.117015] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 7.117167] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 7.117411] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.117502] ALSA hda_intel.c:2402 Using LPIB position fix
[ 7.117601] HDA Intel 0000:01:00.1: irq 55 for MSI/MSI-X
[ 7.117618] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.130868] ALSA hda_intel.c:1490 Enable sync_write for stable communication
[ 7.131092] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.131410] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 8.344523] Adding 2103292k swap on /dev/sdb1. Priority:-1 extents:1 across:2103292k SS
[ 9.278132] device-mapper: uevent: version 1.0.3
[ 9.278346] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 9.367879] ata1.00: exception Emask 0x50 SAct 0x2 SErr 0x280900 action 0x6 frozen
[ 9.368033] ata1.00: irq_stat 0x08000000, interface fatal error
[ 9.368182] ata1: SError: { UnrecovData HostInt 10B8B BadCRC }
[ 9.368329] ata1.00: failed command: READ FPDMA QUEUED
[ 9.368480] ata1.00: cmd 60/08:08:20:d3:64/00:00:04:00:00/40 tag 1 ncq 4096 in
[ 9.368482] res 40/00:08:20:d3:64/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
[ 9.368774] ata1.00: status: { DRDY }
[ 9.368923] ata1: hard resetting link
[ 9.459397] loop: module loaded
[ 9.694944] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9.695768] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9.696274] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9.696441] ata1.00: configured for UDMA/133
[ 9.702891] ata1: EH complete
[ 9.960686] fuse init (API version 7.16)
[ 10.108262] Adding 33554428k swap on /dev/mapper/system-swap_lv. Priority:-2 extents:1 across:33554428k
[ 10.385097] type=1400 audit(1363248507.164:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1130 comm="apparmor_parser"
[ 10.406723] type=1400 audit(1363248507.188:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1135 comm="apparmor_parser"
[ 10.448481] type=1400 audit(1363248507.228:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1139 comm="apparmor_parser"
[ 10.490987] type=1400 audit(1363248507.272:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1143 comm="apparmor_parser"
[ 10.509283] type=1400 audit(1363248507.288:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-explicit-grant-helper" pid=1148 comm="apparmor_parser"
[ 10.533189] type=1400 audit(1363248507.312:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper" pid=1152 comm="apparmor_parser"
[ 10.574867] type=1400 audit(1363248507.356:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper-pam" pid=1156 comm="apparmor_parser"
[ 10.598710] type=1400 audit(1363248507.380:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-read-auth-helper" pid=1160 comm="apparmor_parser"
[ 10.615698] type=1400 audit(1363248507.396:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-resolve-exe-helper" pid=1164 comm="apparmor_parser"
[ 10.639314] type=1400 audit(1363248507.420:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-revoke-helper" pid=1168 comm="apparmor_parser"
[ 11.609040] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
[ 11.613237] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
[ 11.616567] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
[ 11.619674] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
[ 11.623127] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x15
[ 11.626225] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x15
[ 11.629559] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x15
[ 11.632982] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x15
[ 11.636331] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 11.665215] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 11.665708] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 11.666221] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 11.666728] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 11.667234] microcode: CPU4 updated to revision 0x25, date = 2011-10-11
[ 11.667742] microcode: CPU5 updated to revision 0x25, date = 2011-10-11
[ 11.668260] microcode: CPU6 updated to revision 0x25, date = 2011-10-11
[ 11.668767] microcode: CPU7 updated to revision 0x25, date = 2011-10-11
[ 13.022483] auditd (2121): /proc/2121/oom_adj is deprecated, please use /proc/2121/oom_score_adj instead.
[ 13.450190] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 13.989045] bootsplash: scaling image from 1280x1024 to 1920x1080
[ 14.229740] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 18.154003] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 83.571111] udf: udf_read_inode(ino 2238) failed !bh
[ 83.627605] udf: udf_read_inode(ino 2237) failed !bh
[ 83.684114] udf: udf_read_inode(ino 2236) failed !bh
[ 83.740658] udf: udf_read_inode(ino 2235) failed !bh
[ 83.740664] UDF-fs: Failed to read VAT inode from the last recorded block (2238), retrying with the last block of the device (2239).
[ 83.782001] UDF-fs: Filesystem marked read-only because writing to pseudooverwrite partition is not implemented.
[ 83.844097] UDF-fs INFO UDF: Mounting volume 'UDF Volume', timestamp 2013/03/10 07:22 (1000)
[ 615.613349] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 615.631025] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 615.631398] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 615.631772] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 615.632111] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 615.632251] usb 3-2: New USB device found, idVendor=0781, idProduct=5530
[ 615.632257] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 615.632263] usb 3-2: Product: Cruzer
[ 615.632267] usb 3-2: Manufacturer: SanDisk
[ 615.632271] usb 3-2: SerialNumber: 20051741110C54F01006
[ 615.648405] Initializing USB Mass Storage driver...
[ 615.648559] scsi6 : usb-storage 3-2:1.0
[ 615.648677] usbcore: registered new interface driver usb-storage
[ 615.648679] USB Mass Storage support registered.
[ 616.644828] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.10 PQ: 0 ANSI: 2
[ 616.646261] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 616.646594] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 616.647120] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.647820] sd 6:0:0:0: [sdc] Write Protect is off
[ 616.647831] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 616.648002] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.648642] sd 6:0:0:0: [sdc] No Caching mode page present
[ 616.648649] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 616.650322] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.651081] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.651779] sd 6:0:0:0: [sdc] No Caching mode page present
[ 616.651789] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 616.660193] sdc: sdc1
[ 616.661004] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.661603] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 616.662103] sd 6:0:0:0: [sdc] No Caching mode page present
[ 616.662111] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 616.662117] sd 6:0:0:0: [sdc] Attached SCSI removable disk

malcolmlewis
21-Mar-2013, 13:29
On Thu 21 Mar 2013 05:04:08 AM CDT, dhoover1234 wrote:


Hi Malcolm

Yes kernel drivers is installed. In /lib/firmware I have an ath3k-1.fw
and a ath6k/AR6002 and AR6003 file...

Where do I get atl1c from?


Hi
It's part of the kernel, can you use modprobe to load it and see if
that works.

If it does, then open YaST and use /etc/sysconfig editor and add to the
section "MODULES_LOADED_AT_BOOT" this will rebuild your initrd so it
will load during boot.

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.3 (x86_64) Kernel 3.7.10-1.1-desktop
up 10:37, 3 users, load average: 0.00, 0.06, 0.06
CPU Intel® i5 CPU M520@2.40GHz | GPU Intel® Ironlake Mobile

dhoover1234
23-Mar-2013, 14:23
Hi Malcolm

I can only find it in the src directories and I cannot figure out how to compile it???

atl1c_ethtool.c
atl1c.h
atl1c_hw.c
atl1c_hw.h
atl1c_main.c
ls.txt
Makefile

the Makfile only has 2 lines in it:
obj-$(CONFIG_ATL1C) += atl1c.o
atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o

I tried make obj and make atl1c-objs but niether worked..

please help..
Thanks

malcolmlewis
27-Mar-2013, 22:15
On Sat 23 Mar 2013 01:24:02 PM CDT, dhoover1234 wrote:


Hi Malcolm

I can only find it in the src directories and I cannot figure out how
to compile it???

atl1c_ethtool.c
atl1c.h
atl1c_hw.c
atl1c_hw.h
atl1c_main.c
ls.txt
Makefile

the Makfile only has 2 lines in it:
obj-$(CONFIG_ATL1C) += atl1c.o
atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o

I tried make obj and make atl1c-objs but niether worked..

please help..
Thanks




Hi
If you run modprobe atl1c you should see output?

--
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.3 (x86_64) Kernel 3.7.10-1.1-desktop
up 7:35, 3 users, load average: 0.08, 0.03, 0.05
CPU Intel® i5 CPU M520@2.40GHz | GPU Intel® Ironlake Mobile