Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: SLES12 SP2 doesn't start with XEN hypervisor

  1. Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi
    If you run the following against the in kernel driver and it returns a result (it does on SLES 12 SP3);
    Code:
    /sbin/modinfo aacraid |grep 028D
    I would suggest you run the in-kernel version as a test. Look at the logs again as I wonder if the new card creates new blk id's for the device from this part on;
    Code:
    Oct 02 14:00:45 bsxsxen3 kernel: aacraid: Host adapter abort request (1,0,5,0)
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  2. #12

    Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi

    My server is running with SLES12 SP2
    :~ # cat /etc/os-release
    NAME="SLES"
    VERSION="12-SP2"
    VERSION_ID="12.2"
    PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2"


    IDs are

    Code:
    :~ # /sbin/modinfo aacraid |grep 028D
    alias:          pci:v00009005d0000028Dsv*sd*bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
    
    :~ # /sbin/modinfo aacraid
    filename:       /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko
    version:        1.2.1.54013
    license:        GPL
    description:    Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver
    author:         Red Hat Inc and Adaptec
    srcversion:     BB56EBEF7F4C954F34BB64E
    alias:          pci:v00009005d0000028Dsv*sd*bc*sc*i*
    alias:          pci:v00009005d0000028Csv*sd*bc*sc*i*
    alias:          pci:v00009005d0000028Bsv*sd*bc*sc*i*
    alias:          pci:v00009005d00000288sv*sd*bc*sc*i*
    alias:          pci:v00009005d00000286sv*sd*bc*sc*i*
    alias:          pci:v00009005d00000285sv*sd*bc*sc*i*
    alias:          pci:v00009005d00000285sv000017AAsd*bc*sc*i*
    alias:          pci:v00009005d00000285sv00001028sd*bc*sc*i*
    alias:          pci:v00001011d00000046sv0000103Csd000010C2bc*sc*i*
    alias:          pci:v00001011d00000046sv00009005sd00001364bc*sc*i*
    alias:          pci:v00001011d00000046sv00009005sd00000364bc*sc*i*
    alias:          pci:v00001011d00000046sv00009005sd00000365bc*sc*i*
    alias:          pci:v00009005d00000285sv00001028sd00000287bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd000002A2bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd0000029Abc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000299bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000298bc*sc*i*
    alias:          pci:v00009005d00000286sv00001014sd00009540bc*sc*i*
    alias:          pci:v00009005d00000286sv00001014sd00009580bc*sc*i*
    alias:          pci:v00009005d00000285sv00001014sd00000312bc*sc*i*
    alias:          pci:v00009005d00000285sv00001014sd000002F2bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000297bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000296bc*sc*i*
    alias:          pci:v00009005d00000285sv0000103Csd00003227bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000294bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000293bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000292bc*sc*i*
    alias:          pci:v00009005d00000285sv00001028sd00000291bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000290bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd0000028Fbc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd0000028Ebc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd00000800bc*sc*i*
    alias:          pci:v00009005d00000200sv00009005sd00000200bc*sc*i*
    alias:          pci:v00009005d00000287sv00009005sd00000800bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd000002A6bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd000002A5bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd000002A4bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd000002A3bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd000002A1bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd000002A0bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000029Fbc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000029Ebc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000029Dbc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000029Cbc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000029Bbc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000028Cbc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd0000028Bbc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd0000028Abc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000289bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000288bc*sc*i*
    alias:          pci:v00009005d00000285sv000017AAsd00000287bc*sc*i*
    alias:          pci:v00009005d00000285sv000017AAsd00000286bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000287bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000285bc*sc*i*
    alias:          pci:v00009005d00000285sv00009005sd00000286bc*sc*i*
    alias:          pci:v00009005d00000284sv00009005sd00000284bc*sc*i*
    alias:          pci:v00009005d00000283sv00009005sd00000283bc*sc*i*
    alias:          pci:v00001028d0000000Asv00001028sd00000121bc*sc*i*
    alias:          pci:v00001028d0000000Asv00001028sd0000011Bbc*sc*i*
    alias:          pci:v00001028d0000000Asv00001028sd00000106bc*sc*i*
    alias:          pci:v00001028d00000002sv00001028sd000000D9bc*sc*i*
    alias:          pci:v00001028d00000002sv00001028sd000000D1bc*sc*i*
    alias:          pci:v00001028d00000004sv00001028sd000000D0bc*sc*i*
    alias:          pci:v00001028d00000003sv00001028sd00000003bc*sc*i*
    alias:          pci:v00001028d00000002sv00001028sd00000002bc*sc*i*
    alias:          pci:v00001028d00000001sv00001028sd00000001bc*sc*i*
    depends:        scsi_mod,scsi_transport_sas
    supported:      external
    vermagic:       4.4.21-69-default SMP mod_unload modversions
    parm:           firmware_debug:Enable Firmware print debugging.
            0=off
            1=print to adapter diagnostic (default)
            2=print to syslog
            3=adapter diagnostic to syslog (unsupported) (int)
    parm:           nondasd:Control scanning of hba for nondasd devices. 0=off, 1=on (int)
    parm:           cache:Disable Queue Flush commands:
            bit 0 - Disable FUA in WRITE SCSI commands
            bit 1 - Disable SYNCHRONIZE_CACHE SCSI command
            bit 2 - Disable only if Battery is protecting Cache (int)
    parm:           dacmode:Control whether dma addressing is using 64 bit DAC. 0=off, 1=on (int)
    parm:           aac_sync_mode:Force sync. transfer mode 0=off, 1=on (int)
    parm:           aac_convert_sgl:Convert non-conformable s/g list 0=off, 1=on (int)
    parm:           aac_hba_mode:HBA (bypass) mode support 0=off, 1=on (int)
    parm:           commit:Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.
    This is typically needed in systems that do not have a BIOS. 0=off, 1=on (int)
    parm:           msi:IRQ handling. 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI) (int)
    parm:           startup_timeout:The duration of time in seconds to wait for adapter to have it's kernel up and
    running. This is typically adjusted for large systems that do not have a BIOS. (int)
    parm:           aif_timeout:The duration of time in seconds to wait for applications to pick up AIFs before
    deregistering them. This is typically adjusted for heavily burdened systems. (int)
    parm:           aac_fib_dump:Dump controller fibs prior to IOP_RESET 0=off, 1=on (int)
    parm:           coalescethreshold:Control the maximum block size of sequential requests that are fed back to the scsi_merge layer for coalescing. 0=off, 16 block (8KB) default. (int)
    parm:           numacb:Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware. (int)
    parm:           aac_remove_devnodes:Remove device nodes(/dev/sd* and /dev/sg*) permanently when the device goes to offline state. 0=off, 1=on(Default). (int)
    parm:           update_interval:Interval in seconds between time sync updates issued to adapter. (int)
    parm:           check_interval:Interval in seconds between adapter health checks. (int)
    parm:           check_reset:If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it. (int)
    parm:           expose_physicals:Expose physical components of the arrays. -1=protect 0=off, 1=on (int)
    parm:           expose_hidden_space:Expose hidden space of the Array. -1=protect 0=off, 1=on (int)
    parm:           reset_devices:Force an adapter reset at initialization. (int)
    parm:           disc_delay:Delay for x sec before presenting devices (int)
    parm:           wwn:Select a WWN type for the arrays:
            0 - Disable
            1 - Array Meta Data Signature (default)
            2 - Adapter Serial Number (int)
    Last edited by gruner; 04-Oct-2017 at 16:37.

  3. Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi
    Apologies, this one;
    Code:
    /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko |grep 028D
    If it is shown, delete the installed rpms and re-boot, but first keep a copy of the output from the blkid command and then compare the logs to see if they change with the new card....
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  4. #14

    Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi

    both kernel modules are showing the same IDs

    Code:
    :~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko |grep -e 028D -e ^version
    version:        1.2.1.54013
    alias:          pci:v00009005d0000028Dsv*sd*bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
    :~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko |grep -e 028D -e ^version
    version:        1.2-1[41066]-ms
    alias:          pci:v00009005d0000028Dsv*sd*bc*sc*i*
    alias:          pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
    it seem's to be fine. Isn't it?

    Code:
    :~ # /sbin/lspci -nnk
    03:00.0 RAID bus controller [0104]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
            Subsystem: Adaptec Series 8 - ASR-8805 - 8 internal 0 external 12G SAS Port/PCIe 3.0 [9005:0552]
            Kernel driver in use: aacraid
            Kernel modules: aacraid
    Last edited by gruner; 04-Oct-2017 at 21:19.

  5. Re: SLES12 SP2 doesn't start with XEN hypervisor

    On Wed 04 Oct 2017 08:14:02 PM CDT, gruner wrote:

    Hi

    both kernel modules are showing the same IDs


    Code:
    --------------------
    :~
    # /sbin/modinfo /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko
    |grep -e 028D -e ^version version: 1.2.1.54013 alias:
    pci:v00009005d0000028Dsv*sd*bc*sc*i* alias:
    pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i* :~
    # /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko
    |grep -e 028D -e ^version version: 1.2-1[41066]-ms
    alias: pci:v00009005d0000028Dsv*sd*bc*sc*i* alias:
    pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
    --------------------


    it seem's to be fine. Isn't it?


    Hi
    Yes and no, since it's in weak-updates it may have issues with the
    running kernel. As a test remove the rpm's and see how you go with the
    in-kernel supported driver rather than the vendor supplied one.

    --
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  6. #16

    Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi,

    Microsemi bring a new driver version on 17. of october, (AACRAID Drivers 1.2.1-55022 for Linux)
    so even with this driver I can not get my SLES12SP2 with 8805 Controller running with XEN hypervisor!
    Till now no Ideea what can I do?

    Just now I have SLES12SP2 Installd with latests kernel version and with in-kernel supported driver

    # uname -a
    Linux bsxsxen3 4.4.90-92.45-default #1 SMP Tue Oct 24 15:03:15 UTC 2017 (1094ae5) x86_64 x86_64 x86_64 GNU/Linux

    # find / -name aacraid.ko
    /lib/modules/4.4.59-92.17-default/kernel/drivers/scsi/aacraid/aacraid.ko
    /lib/modules/4.4.90-92.45-default/kernel/drivers/scsi/aacraid/aacraid.ko


    If I install SLES12SP2 with 6805 Adaptec Controller XEN hypervisor works without any Problem. (on same Hardware!)

    Any Idee what I can do?

    Thanks

  7. #17

    Re: SLES12 SP2 doesn't start with XEN hypervisor

    Hi again,

    Did anybody has SLES 12 SP3 - XEN running with Adaptec RAID 8805 Controller???
    I open my Call by SUSE last year November 2017!! Till now I got 2 Patches, both doesn't work and till now no solution!!!


    Microsemi bring today a new driver version aacraid_linux_drivers_v1.2.1-56008 but also it doesn't solve my Problem!!
    SLES12 SP3 doesn't start with XEN hypervisor

    Please , did somebody have any Idea what I can do???

    Thanks

    Amila

    # rpm -qa | grep aac
    aacraid-kmp-default-1.2.1_k4.4.73_5-56008.x86_64
    aacraid-ueficert-1.2.1-56008.x86_64


    # find / -name aacraid.ko
    /lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/kernel/drivers/scsi/aacraid/aacraid.ko
    /lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/weak-updates/updates/aacraid.ko
    /lib/modules/4.4.73-5-default/updates/aacraid.ko
    /lib/modules/4.4.120-94.17-default/kernel/drivers/scsi/aacraid/aacraid.ko
    /lib/modules/4.4.120-94.17-default/weak-updates/updates/aacraid.ko
    /var/tmp/dracut.mg8VKm/initramfs/lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/kernel/drivers/scsi/aacraid/aacraid.ko

    # uname -a
    Linux bsxsxen3 4.4.120-94.17-default #1 SMP Wed Mar 14 17:23:00 UTC 2018 (cf3a7bb) x86_64 x86_64 x86_64 GNU/Linux

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •