On Thu 05 Oct 2017 03:14:02 PM CDT, malcolmlewis wrote:

Hi
Well not good news... it worked out of the box for me...

Code:
--------------------

lsusb

Bus 001 Device 003: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
TouchScreen
hwinfo --usb

04: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0
Unique ID: ADDn.lRwV_3FQLd1
Parent ID: k4bc.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: mouse
Model: "D-WAV Scientific eGalax TouchScreen"
Hotplug: USB
Vendor: usb 0x0eef "D-WAV Scientific Co., Ltd"
Device: usb 0x0001 "eGalax TouchScreen"
Revision: "1.00"
Compatible to: int 0x0210 0x0000
Driver: "usbtouchscreen"
Driver Modules: "usbtouchscreen"
Device File: /dev/input/mice (/dev/input/mouse2)
Device
Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event8, /dev/char/13:72, /dev/input/by-id/usb-eGalax_Inc._USB_TouchController-event-if00, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event, /dev/char/13:34, /dev/char/13:63
Device Number: char 13:63 (char 13:34) Speed: 1.5 Mbps
Module Alias: "usb:v0EEFp0001d0100dc00dsc00dp00icFFiscFFipFF "
Driver Info #0:
Buttons: 0
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)

--------------------


Can you post the hwinfo --usb into to see what it's doing.


Hi
OK, so I looked at the script, it uses uinput and blacklists
usbtouchscreen and install it's calibration tools etc.

You didn't need to rebuild the kernel, all that was needed to be done
was run the command mkinitrd so it will apply the blacklist.

So with the device plugged in to the USB port (Hopefully USB 2.0 and
not 3.0) you should see the device preset and using uinput?

If it's still showing usbtouchscreen then I would surmise the blacklist
didn't work.

--
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below... Thanks!