DRBD & HA multipathing

I have a DRBD setup but the resource file only list a connection through a single network connection.

resource sbd02 {
meta-disk internal;
device /dev/drbd_sbd02 minor 2;
net {
protocol C;

after-sb-0pri discard-zero-changes;
after-sb-1pri discard-secondary;
after-sb-2pri disconnect;
}

connection-mesh {
hosts nss-sn01 nss-sn02;
}

on nss-sn01 {
address 192.168.14.251:7792;
disk /dev/sn01-vg0/sbd02;
node-id 0;
}
on nss-sn02 {
address 192.168.14.252:7792;
disk /dev/sn02-vg0/sbd02;
node-id 1;
}
}


Would like to have HA connectivity between the two storage servers with dual network connections

Wondering if 2 addresses could be used and if 1 link would go down the other link would take over automatically. Maybe even use both links like bonding which to give higher performance mirroring, but without bonding.

New possible resource config
on nss-sn01 {
address 192.168.14.251:7792;
address 192.168.15.251:7792;
disk /dev/sn01-vg0/sbd02;
node-id 0;
}
on nss-sn02 {
address 192.168.14.252:7792;
address 192.168.15.252:7792;
disk /dev/sn02-vg0/sbd02;
node-id 1;
}

Can this be done?

Any advice/suggestions/comments.