Hi all,
I have a Dell Inspiron 1564 Laptop, lastday I installed SLED-11-SP2 32 bit with Gnome. On boot prompt, in my system, are 5 options, as below,
"SUSE Linux Enterprise Desktop 11 SP2 - 3.0.38-0.5 (default)"
"Failsafe -- SUSE Linux Enterprise Desktop 11 SP2 - 3.0.38-0.5 (default)"
"Trace -- SUSE Linux Enterprise Desktop 11 SP2 - 3.0.38-0.5"
"SUSE Linux Enterprise Desktop 11 SP2 - 3.0.38-0.5"
"Failsafe -- SUSE Linux Enterprise Desktop 11 SP2 - 3.0.38-0.5 (pae)"

Option 4 (PAE) is the default boot option, set by system automatically.

After Installation & Automatic update, I was not able to set desktop effect from compiz, but whenever I opened "Graphics Card and Monitor" from "Control Center" it Displaying the following information under "Monitor" tab,
Card : ATI M92 (M92 9552)
Monitor : LGD ********
Resolution : 1366x768 (WXGA)
Activate 3D Acceleration : Disbled

Later just booted from option 5 and Again open sax2 & save, after that I can't able to view login GUI, if I use option 4.
Currently I'm able to boot from option 1. and Desktop effect is working well
But here is some horrible thing is displaying. On bottom right corner A transparent Image is displaying with below message,
"AMD"
"Unsupported"
"hardware"

I also list the installed packages from ATI repo :
"ati-fglrxG02-kmp-default"
"ati-fglrxG02-kmp-pae"
"x11-video-fglrxG02"

I also pasting the hwinfo --gfx output below,
linux-9dxj:~ # hwinfo --gfx
22: PCI 200.0: 0300 VGA compatible controller (VGA)
[Created at pci.323]
UDI: /org/freedesktop/Hal/devices/pci_1002_9552
Unique ID: B35A.OD+KH6Bakh3
Parent ID: vSkL.RdVcte4q6g2
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: graphics card
Model: "ATI M92 (M92 9552)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x9552 "M92 (M92 9552)"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0434
Driver: "fglrx_pci"
Driver Modules: "fglrx"
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
IRQ: 45 (145825 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00009552sv00001028sd00000434bc03sc0 0i00"
Driver Info #0:
XFree86 v4 Server Module: fglrx
Driver Info #1:
XFree86 v4 Server Module: fglrx
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)

Primary display adapter: #22
linux-9dxj:~ #

So, can any one please help me to boot my system with PAE with Desktop effect enabled