Hi - I have seen various posts related to this topic but none really give a step by step guide so hopefully someone out there can fill in the blanks
We would like to set up a SLES 10.3 server to be able to route packets between different subnets
For example subnet 192.168.0.0 /24 will be able to route to 10.0.0.0 /8 - This server will not have any connections to the the internet.
eth0 = 192.168.0.1
eth1 = 10.0.0.1

I have enabled ip-forwarding on the SLES box and can ping from a separate device on the 192.168.0.0 network throught to eth1 on 10.0.0.1 but I cannot ping any devices beyond that interface on the 10.0.0.0 network.

From reading the board I suspect this may be firewall related but I am not sure how to resolve the issue.

Any help would be greatly appreciated!