Hardware: Dell PE R620 with PERC H710 RAID controller
System: SLES11 SP2 x86_64
Within the SUSE installation system the first hard disk (RAID1 on RAID
controller consisting of two SAS disks, no other disks are defined)
shows up as /dev/sdb. However, upon first booting the freshly installed
system the kernel finds the disk as /dev/sda. This messes up the
installation completely, of course, as only the root partition as
defined in grub is found.
Any ideas on how to deal with this other than manually repairing fstab,
grub etc after the initial install?

Günther