Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: ASSISTANCE IS GREATLY APPRECIATED.

  1. #1
    Join Date
    Sep 2013
    Location
    Fort Wayne, IN. U.S.A.
    Posts
    8

    ASSISTANCE IS GREATLY APPRECIATED.

    I'm a new user in the Linux community, and was really intrigued by the popularity of Suse- Linux Enterprise Desktop 11.
    I currently have Windows 7 Home Premium SP1; AMD Athlon II x2 255 Processor 3.10 GHz; Installed RAM-4GB; 64 bit OS, and wanted to have a dual boot machine.
    I downloaded the .ISO DVD1-SLED_11_SP3 x86_64, and am also downloading the .ISO DVD2-SLED_11_SP3 x86_64.
    When extracting the .ISO DVD1; which shows to be 2.0 GB. Is this correct? The .ISODVD2 is 8.0 GB.
    Am not sure if I need both. But I was reading through Novell's Knowledgebase: https://www.suse.com/support/kb/doc.php?id=3882364;
    and came across the following:
    The Novell Client 2 SP3 for Windows supports the Microsoft Windows 7, Windows 8, Windows Server 2008 R2, and Windows Server 2012 32-bit and x64 operating systems.
    The current version is Novell Client 2 SP3 for Windows.
    and......@
    https://www.suse.com/support/kb/doc.php?id=3882364: the following is mentioned.

    Novell Client 2 SP3 for Windows is supported on the following platforms:

    Windows 8 (x86 or x64) excluding Windows 8 RT
    Windows Server 2012 (x64)
    Windows 7 (x86 or x64) (Ultimate Edition, Enterprise Edition, or Professional Edition)
    Windows Server 2008 R2 (x64) (Enterprise Edition, or Standard Edition)
    The Novell Client for Windows is also supported in Desktop Virtualization and Terminalserver environments.
    Non-Supported Windows Platforms

    Novell Client 2 SP3 for Windows might run but is not supported on Windows Starter, Home Basic, and Home Premium editions.

    On Windows Server platforms, Novell Client 2 SP3 for Windows might run but is not supported on Datacenter Edition, Web Server Edition, or on Server Core installations using any edition.

    Novell Client 2 SP3 for Windows will not install or run on Windows Vista, Windows XP, Windows Server 2008 , Windows Server 2003, or Windows 2000.

    Does this mean that my current OS; being Windows 7 Home Premium does not support such?
    Any help in this matter is greatly appreciated.
    Thanks in advance.
    Daniel Espinosa

  2. #2

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    On 09/08/2013 05:55 PM, dre24 7 wrote:
    >
    > I'm a new user in the Linux community, and was really intrigued by the
    > popularity of Suse- Linux Enterprise Desktop 11.


    SUSE is great; welcome to the community.

    > I currently have Windows 7 Home Premium SP1; AMD Athlon II x2 255
    > Processor 3.10 GHz; Installed RAM-4GB; 64 bit OS, and wanted to have a
    > dual boot machine.
    > I downloaded the .ISO DVD1-SLED_11_SP3 x86_64, and am also downloading
    > the .ISO DVD2-SLED_11_SP3 x86_64.
    > When extracting the .ISO DVD1; which shows to be 2.0 GB. Is this
    > correct? The .ISODVD2 is 8.0 GB.


    You only need the first DVD unless you want source code, which you likely
    do not currently. If your system is showing a size less than the real
    size it is often because the browser does not support large files. Use
    another browser, like Firefox or Chromium, and it should show, and
    download, the full size.

    > Novell Client 2 SP3 for Windows is supported on the following
    > platforms:
    >
    > Windows 8 (x86 or x64) excluding Windows 8 RT
    > Windows Server 2012 (x64)
    > Windows 7 (x86 or x64) (Ultimate Edition, Enterprise Edition, or
    > Professional Edition)
    > Windows Server 2008 R2 (x64) (Enterprise Edition, or Standard Edition)
    > The Novell Client for Windows is also supported in Desktop
    > Virtualization and Terminalserver environments.
    > Non-Supported Windows Platforms
    >
    > Novell Client 2 SP3 for Windows might run but is not supported on
    > Windows Starter, Home Basic, and Home Premium editions.
    > Does this mean that my current OS; being Windows 7 Home Premium does not
    > support such?


    Yes, not supported it would seem, but you should check on
    forums.novell.com in the OES forums dedicated to the Novell Client if you
    need more confirmation. Chances are it'll work, but Novell does not write
    software for home users like they do for enterprise users, so home
    versions of windows are not often supported, though in reality the
    differences are pretty small, especially where the Novell Client is
    concerned. Before worrying about it, why do you want to install the
    client? Does it do something you need to do?

    Good luck.

  3. #3
    Join Date
    Sep 2013
    Location
    Fort Wayne, IN. U.S.A.
    Posts
    8

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    Thank you ab for the quick reply. I'm not sure if I need the client at all.
    Like I stated before; I'm new to Linux; and basically wanted to try Suse Linux, and have it run along with my Windows 7.
    I created a new partition of 50 GB to hold the OS. Even though it's the same physical hard drive, only difference virtually speaking.
    So, I believe I can make the installation only using the .ISO DVD1-SLED_11_SP3 x86_64. The second one is not necessarily needed.
    Thank you for clarifying things for me. Your help is greatly appreciated.

  4. #4
    Join Date
    Sep 2013
    Location
    Fort Wayne, IN. U.S.A.
    Posts
    8

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    After a long day of finally finishing downloading the .ISO DVD1-SLED_11_SP3 x86_64, it was too large to burn on a single layer DVD. I went ahead and extracted these files onto a clean formatted 8GB USB drive. When I proceeded to boot from the same; I got the error that BOOTMGR was missing. I don't get what I'm doing wrong. Can anyone help PLEASE.

  5. Re: ASSISTANCE IS GREATLY APPRECIATED.

    Hi Daniel,

    that DVD ISO contains a bootable system - just "dd" the ISO to your USB drive and you should be ready to go.

    Regards,
    Jens
    From the times when today's "old school" was "new school"

    If you find this post helpful and are logged into the web interface, show your appreciation and click on the star below...

  6. #6
    Join Date
    Sep 2013
    Location
    Fort Wayne, IN. U.S.A.
    Posts
    8

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    I am sorry to say that I do not see that "dd" after extracting the .ISO file.
    This can be so frustrating. I'm about to throw the towel here.
    Last edited by dre24_7; 09-Sep-2013 at 16:06.

  7. Re: ASSISTANCE IS GREATLY APPRECIATED.

    Hi Daniel,

    Quote Originally Posted by dre24_7 View Post
    I am sorry to say that I do not see that "dd" after extracting the .ISO file.
    This can be so frustrating. I'm about to throw the towel here.
    "dd" is a command that should already be installed on your system (part of coreutils RPM). It's basically a "binary copy" from one "file" to another... invocation does look a bit strange at first, but one gets used to it:
    Code:
    dd if=mydownloadeddvd.iso of=/dev/deviceForUsbStick bs=4k
    and "man dd" will give you the full picture. "bs=4k" stands for "copy in chunks of 4 kilobytes" and dd will work without it, but using bs=512... which usually is much slower because of the higher number of operations (I even use bs=1M when I know that it fits).

    Regards,
    Jens
    From the times when today's "old school" was "new school"

    If you find this post helpful and are logged into the web interface, show your appreciation and click on the star below...

  8. #8

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    Quote Originally Posted by dre24_7 View Post
    After a long day of finally finishing downloading the .ISO DVD1-SLED_11_SP3 x86_64, it was too large to burn on a single layer DVD.
    That statement puzzles me because SLED-11-SP3-DVD-x86_64-GM-DVD1.iso is 4568645632 bytes and that should fit on a single layer DVD. I have successfully burnt it to a single layer DVD.
    If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below... thanks!

  9. Re: ASSISTANCE IS GREATLY APPRECIATED.

    Hi again,

    Quote Originally Posted by dre24_7 View Post
    I am sorry to say that I do not see that "dd" after extracting the .ISO file.
    I just noticed... you needn't *extract* anything from the ISO file. Think of it as an "image" of the DVD, that you'll be copying to the DVD, oops, make that "USB drive"

    I'm assuming you're doing this on a Linux box - if you're running some MS Windows system, have a look here: http://en.opensuse.org/SDB:Live_USB_...s_Instructions

    Regards,
    Jens
    From the times when today's "old school" was "new school"

    If you find this post helpful and are logged into the web interface, show your appreciation and click on the star below...

  10. #10
    Join Date
    Sep 2013
    Location
    Fort Wayne, IN. U.S.A.
    Posts
    8

    Re: ASSISTANCE IS GREATLY APPRECIATED.

    Yes; I'm running Windows 7; and I can't wait to have Linux installed once in for all. I tried burning the files from the .ISO image which I extracted with WinRar. I tried burning it to a DVD, and after unsuccessful tries, I opted to use a USB drive and make it bootable from there. Funny, at this point I'm so confused that I don't even know which way to go. I have MagicISO; but from what I understand I cannot boot having Windows running. It must be installed on a Drive of its own.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •