I have a QLogic QLE2360 Fibre Channel HBA that i have installed in the system below:

SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"

SLES recognizes the adapter on boot and seems to load the qla2xxx driver however i am unable to find any devices. I have tried a full rescan of all scsi devices, I have installed the SANSurfer software which recognizes the QLE2360 however it keeps saying that there is no connection. The back of the card has 3 LEDs (green, amber, red) the green and red are solid which means: Power On (After Firmware Init and/or Loss). It is recognized as a scsi device and it appears in the system information, i have also updated the drivers from QLogic. I have exhausted all my searching for a solution. Can anyone give any insight as to what i am missing. I tried modprobing it, rebooting, but i am not sure whats going on.

Thanks
Mike