I passed the store to SLES11SP2 system added a "Lun".
By "cat / proc / paration" to see the "lun" called "sddlmaf", but use "fdisk-l" Take not see partition.
Use "partprobe" can not synchronize the kernel partition information to the partition table.
Reboot the system does not work too.

cat /proc/paration
251 65 88413727 sddlmae1
251 80 104857920 sddlmaf
251 96 104857920 sddlmag
251 97 88413727 sddlmag1

fdisk -l

Disk /dev/sddlmab: 40.0 GB, 39954677760 bytes
64 heads, 32 sectors/track, 38103 cylinders, total 78036480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sddlmac: 40.0 GB, 39954677760 bytes
64 heads, 32 sectors/track, 38103 cylinders, total 78036480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sddlman: 107.4 GB, 107374510080 bytes
255 heads, 63 sectors/track, 13054 cylinders, total 209715840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sddlmao: 107.4 GB, 107374510080 bytes
255 heads, 63 sectors/track, 13054 cylinders, total 209715840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000