Page 1 of 2 12 LastLast
Results 1 to 10 of 45

Thread: Display is not loaded after SP3 update

Hybrid View

  1. #1

    Display is not loaded after SP3 update

    After running zypper update and restarting, I landed on a command prompt and the GUI is not starting.

    From previous posts, I tried running sax2 -r -m 0=fglrx but it didn't start.

    startx fails and I'm able to do gdm start as root only.

    Here's the contents of the xorg.0.log file

    Code:
    X.Org X Server 1.6.5
    Release Date: 2009-10-11
    X Protocol Version 11, Revision 0
    Build Operating System: openSUSE SUSE LINUX
    Current Operating System: Linux linux-moati 3.0.101-0.7.17-default #1 SMP Tue Feb 4 13:24:49 UTC 2014 (90aac76) x86_64
    Build Date: 27 June 2014  11:55:00AM
     
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 23 20:13:30 2014
    (II) Loader magic: 0xcc0
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 5.0
    	X.Org XInput driver : 4.0
    	X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    
    (--) PCI:*(0:0:2:0) 8086:0166:103c:17f4 Intel Corporation 3rd Gen Core processor Graphics Controller rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000
    4000/64
    (--) PCI: (0:1:0:0) 1002:6841:103c:17f4 Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] rev 0, Mem @ 0xb0000000/268435456, 0xd0900000/131072, I/
    O @ 0x00003000/256, BIOS @ 0x????????/131072
    (==) Using default built-in configuration (39 lines)
    (==) --- Start of built-in configuration ---
    	Section "Device"
    		Identifier	"Builtin Default intel Device 0"
    		Driver	"intel"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default intel Screen 0"
    		Device	"Builtin Default intel Device 0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default i810 Device 0"
    		Driver	"i810"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default i810 Screen 0"
    		Device	"Builtin Default i810 Device 0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default fbdev Device 0"
    		Driver	"fbdev"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default fbdev Screen 0"
    		Device	"Builtin Default fbdev Device 0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default vesa Device 0"
    		Driver	"vesa"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default vesa Screen 0"
    		Device	"Builtin Default vesa Device 0"
    	EndSection
    	Section "ServerLayout"
    		Identifier	"Builtin Default Layout"
    		Screen	"Builtin Default intel Screen 0"
    		Screen	"Builtin Default i810 Screen 0"
    		Screen	"Builtin Default fbdev Screen 0"
    		Screen	"Builtin Default vesa Screen 0"
    	EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default intel Screen 0" (0)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default intel Device 0"
    (==) No monitor specified for screen "Builtin Default intel Screen 0".
    	Using a default monitor configuration.
    (**) |-->Screen "Builtin Default i810 Screen 0" (1)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default i810 Device 0"
    (==) No monitor specified for screen "Builtin Default i810 Screen 0".
    	Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    	Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (3)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    	Using a default monitor configuration.
    (==) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/OTF" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/misc:unscaled,
    	/usr/share/fonts/truetype/,
    	/usr/share/fonts/Type1/,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled
    (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
    (==) |-->Input Device "<default pointer>"
    (==) |-->Input Device "<default keyboard>"
    (==) The core pointer device wasn't specified explicitly in the layout.
    	Using the default mouse configuration.
    (==) The core keyboard device wasn't specified explicitly in the layout.
    	Using the default keyboard configuration.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib64/xorg/modules/updates//extensions/libglx.so
    (II) Module glx: vendor="Advanced Micro Devices, Inc."
    	compiled for 6.9.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib64/xorg/modules//extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib64/xorg/modules//extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib64/xorg/modules//extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.1.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib64/xorg/modules//drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 2.21.4
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "i810"
    (WW) Warning, couldn't open module i810
    (II) UnloadModule: "i810"
    (EE) Failed to load module "i810" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (II) Loading /usr/lib64/xorg/modules//drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 0.4.1
    	ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib64/xorg/modules//drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 2.2.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib64/xorg/modules//input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.4.0
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib64/xorg/modules//input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.3.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 4.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    	Haswell SDV Server (GT2), Haswell SDV Server (GT2+), HD Graphics,
    	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    	ValleyView PO board
    (II) FBDEV: driver for framebuffer: fbdev
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 00@00:02:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (WW) Falling back to old probe method for fbdev
    (II) Loading sub module "fbdevhw"
    (II) LoadModule: "fbdevhw"
    (II) Loading /usr/lib64/xorg/modules/linux//libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 0.0.2
    	ABI class: X.Org Video Driver, version 5.0
    (WW) Falling back to old probe method for vesa
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) intel(0): Creating default Display subsection in Screen section
    	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    (**) intel(0): Relaxed fencing enabled
    (**) intel(0): Wait on SwapBuffers? enabled
    (**) intel(0): Triple buffering? enabled
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): 3D buffers tiled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output LVDS1 has no monitor section
    (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output HDMI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output HDMI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1366x768 @ 60.067616
    (II) intel(0): Kernel page flipping support detected, enabling
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (340, 190) mm
    (**) intel(0): DPI set to (102, 102)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib64/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.6.5, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "dri2"
    (II) LoadModule: "dri2"
    (II) Reloading /usr/lib64/xorg/modules//extensions/libdri2.so
    (II) UnloadModule: "fbdev"
    (II) Unloading /usr/lib64/xorg/modules//drivers/fbdev_drv.so
    (II) UnloadModule: "fbdevhw"
    (II) Unloading /usr/lib64/xorg/modules/linux//libfbdevhw.so
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib64/xorg/modules//drivers/vesa_drv.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    (II) UXA(0): Driver registered support for the following operations:
    (II)         solid
    (II)         copy
    (II)         composite (RENDER acceleration)
    (II)         put_image
    (II)         get_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder enabled
    (II) intel(0): Set up textured video
    (II) intel(0): [XvMC] xvmc_vld driver initialized.
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (EE) GLX error: Can not get required symbols.
    (II) intel(0): Setting screen physical size to 344 x 194
    (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-603B05CD50433F04F64C7B12280B8D7BC10853E0.xkm
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (**) <default pointer>: (accel) keeping acceleration scheme 1
    (**) <default pointer>: (accel) filter chain progression: 2.00
    (**) <default pointer>: (accel) filter stage 0: 20.00 ms
    (**) <default pointer>: (accel) set acceleration profile 0
    (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) <default keyboard>: always reports core events
    (**) Option "Protocol" "standard"
    (**) <default keyboard>: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) <default keyboard>: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) <default keyboard>: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) <default keyboard>: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) <default keyboard>: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
    (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-603B05CD50433F04F64C7B12280B8D7BC10853E0.xkm
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Kensington      Kensington USB/PS2 Wheel Mouse
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    (II) intel(0): EDID vendor "LGD", prod id 917
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz)
    (II) intel(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz)
    and the contents of ./xsession-errors

    Code:
    chown: changing ownership of `/dev/xconsole': Operation not permitted
    chmod: changing permissions of `/dev/xconsole': Operation not permitted
    /etc/X11/xim: Checking whether an input method should be started.
    /etc/X11/xim: use GDM_LANG=en_US.UTF-8
    sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
    INPUT_METHOD is not set or empty (no user selected input method).
    Trying to start a default input method for the locale en_US.UTF-8 ...
    Checking for a default input method in /etc/X11/xim.d/en/
    sourcing /etc/X11/xim.d/en/40-none ...
    Dummy input method "none" (do not use any fancy input method by default)
    /etc/X11/xim.d/en/40-none started sucessfully
    GNOME_KEYRING_SOCKET=/tmp/keyring-FtfG4c/socket
    SSH_AUTH_SOCK=/tmp/keyring-FtfG4c/socket.ssh
    
    ** (gnome-settings-daemon:6062): WARNING **: Can not run apport-checkreports
    
    Window manager warning: Failed to read saved session file /home/aabdelkhalek/.config/metacity/sessions/10bf0827a7d6aee679141151762955314000000058690025.ms: Failed to op
    en file '/home/aabdelkhalek/.config/metacity/sessions/10bf0827a7d6aee679141151762955314000000058690025.ms': No such file or directory
    Initializing nautilus-open-terminal extension
    Initializing nautilus-share extension
    
    ** (nautilus:6157): WARNING **: Unable to add monitor: Not supported
    GSynaptics couldn't initialize.
    You have to set 'SHMConfig' 'true' in xorg.conf or XFree86.conf to use GSynaptics
    
    ** (bluetooth-applet:6247): WARNING **: Could not open RFKILL control device, please verify your installation
    Could not read Gnome Bookmarks file /home/aabdelkhalek/.gtk-bookmarks: Could not find file "/home/aabdelkhalek/.gtk-bookmarks".
    Could not read Gnome Bookmarks file /home/aabdelkhalek/.gtk-bookmarks: Could not find file "/home/aabdelkhalek/.gtk-bookmarks".
    [Error 20:14:06.589] Error in RunOnThread: Object reference not set to an instance of an object
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/private-key' : 'GArray_guchar_'
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/phase2-private-key' : 'GArray_guchar_'
    Could not read Gnome Bookmarks file /home/aabdelkhalek/.gtk-bookmarks: Could not find file "/home/aabdelkhalek/.gtk-bookmarks".
    [Error 20:14:12.580] Error in RunOnThread: Object reference not set to an instance of an object
    [Error 20:14:12.580] Error in RunOnThread: Object reference not set to an instance of an object
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/private-key' : 'GArray_guchar_'
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/phase2-private-key' : 'GArray_guchar_'
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_632: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_956: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_888: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_956: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_632: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_888: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/private-key' : 'GArray_guchar_'
    
    ** (nm-applet:6253): WARNING **: Unhandled setting secret type (write) '802-1x/phase2-private-key' : 'GArray_guchar_'
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_956: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_956
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_888: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_888
    ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/platform_parport_pc_632: dbus.exceptions.DBusException: org.freedesktop.Hal.NoSuchDevice: No de
    vice with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    Error in cups-autoconfig integration: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_632
    and hwinfo

    Code:
    hwinfo --gfxcard
    10: PCI 02.0: 0300 VGA compatible controller (VGA)              
      [Created at pci.323]
      UDI: /org/freedesktop/Hal/devices/pci_8086_166
      Unique ID: _Znp.qTfIAMnfqxD
      SysFS ID: /devices/pci0000:00/0000:00:02.0
      SysFS BusID: 0000:00:02.0
      Hardware Class: graphics card
      Model: "Intel Ivybridge M GT2"
      Vendor: pci 0x8086 "Intel Corporation"
      Device: pci 0x0166 "Ivybridge M GT2"
      SubVendor: pci 0x103c "Hewlett-Packard Company"
      SubDevice: pci 0x17f4 
      Revision: 0x09
      Driver: "i915"
      Driver Modules: "drm"
      Memory Range: 0xd0000000-0xd03fffff (rw,non-prefetchable)
      Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
      I/O Ports: 0x4000-0x403f (rw)
      IRQ: 47 (16900 events)
      Module Alias: "pci:v00008086d00000166sv0000103Csd000017F4bc03sc00i00"
      Driver Info #0:
        XFree86 v4 Server Module: intel
      Driver Info #1:
        XFree86 v4 Server Module: intel
        3D Support: yes
      Config Status: cfg=no, avail=yes, need=no, active=unknown
    
    22: PCI 100.0: 0300 VGA compatible controller (VGA)
      [Created at pci.323]
      UDI: /org/freedesktop/Hal/devices/pci_1002_6841
      Unique ID: VCu0.HK01eKAEHX3
      Parent ID: vSkL.8JR0t1dzfbF
      SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
      SysFS BusID: 0000:01:00.0
      Hardware Class: graphics card
      Model: "ATI 0x6841"
      Vendor: pci 0x1002 "ATI Technologies Inc"
      Device: pci 0x6841 "0x6841"
      SubVendor: pci 0x103c "Hewlett-Packard Company"
      SubDevice: pci 0x17f4 
      Driver: "fglrx_pci"
      Driver Modules: "fglrx"
      Memory Range: 0xb0000000-0xbfffffff (ro,non-prefetchable)
      Memory Range: 0xd0900000-0xd091ffff (rw,non-prefetchable)
      I/O Ports: 0x3000-0x3fff (rw)
      Memory Range: 0xd0920000-0xd093ffff (ro,non-prefetchable,disabled)
      IRQ: 16 (329 events)
      Module Alias: "pci:v00001002d00006841sv0000103Csd000017F4bc03sc00i00"
      Driver Info #0:
        XFree86 v4 Server Module: fglrx
      Driver Info #1:
        XFree86 v4 Server Module: fglrx
        3D Support: yes
        Extensions: dri
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #9 (PCI bridge)
    
    Primary display adapter: #10
    any help is appreciated

    Thanks,
    Ahmed

  2. Re: Display is not loaded after SP3 update

    On Wed 24 Sep 2014 12:54:02 AM CDT, aabdelkhalek wrote:


    After running zypper update and restarting, I landed on a command prompt
    and the GUI is not starting.

    From previous posts, I tried running sax2 -r -m 0=fglrx but it didn't
    start.

    startx fails and I'm able to do gdm start as root only.
    Hi
    How was the fglrx driver originally installed, via rpm or manually
    build from source?

    So your running a hybrid gfx card?

    --
    Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.1 Kernel 3.11.10-21-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  3. #3

    Re: Display is not loaded after SP3 update

    Quote Originally Posted by malcolmlewis View Post
    Hi
    How was the fglrx driver originally installed, via rpm or manually
    build from source?
    I don't recall building it manually so I must have installed it via rpm

    So your running a hybrid gfx card?
    It is an HP ProBook 4540s laptop that was preloaded with SLED11 SP2 and just yesterday I updated it to SP3

    I believe it is x11-video-fglrxG02-HP but it says (System Packages) under Repo so does this mean I have to search for the driver over the internet?

    Code:
    S | Name                            | Type       | Version                       | Arch   | Repository             
    --+---------------------------------+------------+-------------------------------+--------+------------------------
    i | libgstbasevideo-0_10-0          | package    | 0.10.22-7.9.63                | x86_64 | SLED11-SP3-Pool        
      | libgstbasevideo-0_10-0-32bit    | package    | 0.10.22-7.9.63                | x86_64 | SLED11-SP3-Pool        
      | x11-video-fglrxG02              | package    | 8.970-4.58                    | x86_64 | ATI-Driver-SLE11-SP3   
      | x11-video-fglrxG02              | package    | 8.970-4.50                    | i586   | ATI-Driver-SLE11-SP3   
    i | x11-video-fglrxG02-HP           | package    | 8.982-1.1                     | x86_64 | (System Packages)      
      | x11-video-fglrxG03              | package    | 12.104-1.2                    | x86_64 | ATI-Driver-SLE11-SP3   
      | x11-video-fglrxG03              | package    | 12.104-1.2                    | i586   | ATI-Driver-SLE11-SP3   
      | x11-video-nvidia                | package    | 96.43.23-23.1                 | x86_64 | nVidia-Driver-SLE11-SP3
      | x11-video-nvidia                | package    | 96.43.23-23.1                 | i586   | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG01             | package    | 173.14.39-28.1                | x86_64 | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG01             | package    | 173.14.39-28.1                | i586   | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG02             | package    | 304.121-38.1                  | x86_64 | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG02             | package    | 304.121-38.1                  | i586   | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG03             | package    | 340.32-31.1                   | x86_64 | nVidia-Driver-SLE11-SP3
      | x11-video-nvidiaG03             | package    | 340.32-31.1                   | i586   | nVidia-Driver-SLE11-SP3
    i | xorg-x11-driver-video           | package    | 7.4.0.1-0.85.5                | x86_64 | SLED11-SP3-Updates     
    v | xorg-x11-driver-video           | package    | 7.4.0.1-0.81.27               | x86_64 | SLED11-SP3-Pool        
      | xorg-x11-driver-video           | srcpackage | 7.4.0.1-0.85.5                | noarch | SLED11-SP3-Updates     
      | xorg-x11-driver-video-chrome9   | package    | 5.74.33-0.2.53                | x86_64 | SLED11-SP3-Pool        
    i | xorg-x11-driver-video-radeonhd  | package    | 1.3.0_20100512_80ba041-1.8.55 | x86_64 | SLED11-SP3-Pool        
      | xorg-x11-driver-video-unichrome | package    | 20091117-0.6.142              | x86_64 | SLED11-SP3-Pool
    Thanks,
    Ahmed

  4. #4

    Re: Display is not loaded after SP3 update

    I checked HP site and found the linux graphics driver which contained 2 rpms:

    x11-video-fglrxG02-HP-8.982-1.1.x86_64.rpm
    ati-fglrxG02-HP-kmp-default-8.982_3.0.13_0.27-1.1.x86_64.rpm

    I installed them one by one but this didn't solve the problem!

    I recalled that I had that problem before and was keeping on my HD another file:

    amd-driver-installer-catalyst-13-4-x86.x86_64.run

    had to use the --force option to install it and then tried but it didn't work at the first time and when I checked the /var/log/Xorg.0.log, it said something like found screen but didn't match any of the configuration so I moved /etc/X11/xorg.conf to xorg.conf.old and then tried and this time it worked!

    I guess I should expect problems each time the X11 server is being updated!

    One last thing, when I run zypper update I get the below message:
    The following package updates will NOT be installed:
    kernel-default kernel-default-base kernel-default-extra

    Do you have any idea why is that?


    Thanks,
    Ahmed
    Last edited by aabdelkhalek; 25-Sep-2014 at 01:28.

  5. Re: Display is not loaded after SP3 update

    On Thu 25 Sep 2014 12:34:01 AM CDT, aabdelkhalek wrote:


    I checked HP site and found the linux graphics driver which contained 2
    rpms:

    x11-video-fglrxG02-HP-8.982-1.1.x86_64.rpm
    ati-fglrxG02-HP-kmp-default-8.982_3.0.13_0.27-1.1.x86_64.rpm

    I installed them one by one but this didn't solve the problem!

    I recalled that I had that problem before and was keeping on my HD
    another file:

    amd-driver-installer-catalyst-13-4-x86.x86_64.run

    had to use the --force option to install it and then tried but it didn't
    work at the first time and when I checked the /var/log/Xorg.0.log, it
    said something like found screen but didn't match any of the
    configuration so I moved /etc/X11/xorg.conf to xorg.conf.old and then
    tried and this time it worked!

    I guess I should expect problems each time the X11 server is being
    updated!

    One last thing, when I run zypper update I get the below message:
    The following package updates will NOT be installed:
    kernel-default kernel-default-base kernel-default-extra

    Do you have any idea why is that?


    Thanks,
    Ahmed


    Hi
    So the system has a hybrid graphics card. Is it possible in the BIOS to
    disable the intel or ATI gpu?

    The reason the kernel won't update is probably the ATI driver (kmp), do
    you specifically need the ATI card running? Else if you can disable and
    live with the intel one, it may be an easier solution.

    --
    Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.1 Kernel 3.11.10-21-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  6. #6

    Re: Display is not loaded after SP3 update

    Quote Originally Posted by malcolmlewis View Post
    Hi
    So the system has a hybrid graphics card. Is it possible in the BIOS to
    disable the intel or ATI gpu?

    The reason the kernel won't update is probably the ATI driver (kmp), do
    you specifically need the ATI card running? Else if you can disable and
    live with the intel one, it may be an easier solution.
    I tried looking around in BIOS and I'm not sure if there is such option!

    It might be a silly question but how to be sure? or how to disable one of these cards then?

    Thanks,
    Ahmed

  7. Re: Display is not loaded after SP3 update

    On Thu 25 Sep 2014 02:44:02 PM CDT, aabdelkhalek wrote:


    malcolmlewis;23815 Wrote:
    > Hi
    > So the system has a hybrid graphics card. Is it possible in the BIOS
    > to disable the intel or ATI gpu?
    >
    > The reason the kernel won't update is probably the ATI driver (kmp),
    > do you specifically need the ATI card running? Else if you can
    > disable and live with the intel one, it may be an easier solution.


    I tried looking around in BIOS and I'm not sure if there is such
    option!

    It might be a silly question but how to be sure? or how to disable one
    of these cards then?

    Thanks,
    Ahmed


    Hi
    Have a read here;
    http://planetoss.com/articles/how-to...card-in-linux/

    If you don't need the ATI driver, I would suggest sticking to the intel
    one...

    If you proceed with disabling the fglrx driver, then would use sax2 to
    use the intel one.

    --
    Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
    openSUSE 13.1 (Bottle) (x86_64) GNOME 3.10.1 Kernel 3.11.10-21-desktop
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!


  8. #8

    Re: Display is not loaded after SP3 update

    Quote Originally Posted by malcolmlewis View Post
    I tried following that procedure but I don't even have a directory called vgaswitcheroo in /sys/kernel/debug as you can see below!
    Code:
    :/sys/kernel/debug> ll
    total 0
    drwxr-xr-x  2 root root 0 Sep 28 13:20 acpi
    drwxr-xr-x 14 root root 0 Oct  3 18:28 bdi
    drwxr-xr-x  3 root root 0 Sep 28 13:20 bluetooth
    drwxr-xr-x  2 root root 0 Sep 28 13:20 cleancache
    drwxr-xr-x  4 root root 0 Sep 28 13:20 dri
    drwxr-xr-x  2 root root 0 Sep 28 13:20 dynamic_debug
    drwxr-xr-x  2 root root 0 Sep 28 13:20 extfrag
    -r--r--r--  1 root root 0 Sep 28 13:20 gpio
    drwxr-xr-x  3 root root 0 Sep 28 13:20 ieee80211
    drwxr-xr-x  2 root root 0 Sep 28 13:20 kprobes
    drwxr-xr-x  2 root root 0 Sep 28 13:20 mce
    drwxr-xr-x  2 root root 0 Sep 28 13:20 mmc0
    drwxr-xr-x  3 root root 0 Sep 28 13:20 regulator
    -rw-r--r--  1 root root 0 Sep 28 13:20 sched_features
    drwxr-xr-x  5 root root 0 Sep 28 13:20 tracing
    drwxr-xr-x  2 root root 0 Sep 28 13:20 usb
    -r--r--r--  1 root root 0 Sep 28 13:20 wakeup_sources
    drwxr-xr-x  2 root root 0 Sep 28 13:20 x86
    Thanks,
    Ahmed

  9. Re: Display is not loaded after SP3 update

    Hi
    Not really sure what to do, have you tried using the sax2 command with intel instead of fglrx?

    Can you post the output from;
    Code:
    /sbin/lspci -nnk|grep -A3 VGA
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  10. Re: Display is not loaded after SP3 update

    Quote Originally Posted by malcolmlewis View Post
    Hi
    Not really sure what to do, have you tried using the sax2 command with intel instead of fglrx?
    The laptop is working now, it is just the problem of the update which you suggested might be related to dual display issue.

    Here you're the output of /sbin/lspci -nnk|grep -A3 VGA
    Code:
    /sbin/lspci -nnk|grep -A3 VGA
    00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
    	Subsystem: Hewlett-Packard Company Device [103c:17f4]
    	Kernel driver in use: i915
    	Kernel modules: i915
    --
    01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841]
    	Subsystem: Hewlett-Packard Company Device [103c:17f4]
    	Kernel modules: radeon
    03:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
    Thanks,
    Ahmed

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •