Hello,

I have trouble to get an IPv6 address configured on SLES11SP3.
The system wont assign the IPv6 address after a reboot which is configured in "/etc/sysconfig/network/ifcfg-br0" (Address is not shown in ifconfig)

When I try to add the IPv6 address manually by enter the command below, all is working fine !

PHP Code:
ip -6 address add 2A00:xxxx:2010:xxxx:1::2/112 dev br0
ip 
-6 route add default via 2A00:xxxx:2010:xxxx:0000:0000:0000:0001 dev br0 

Here is my br0 configuration file: /etc/sysconfig/network/ifcfg-br0:

PHP Code:
BOOTPROTO='static'
BRIDGE='yes'
BRIDGE_FORWARDDELAY='0'
BRIDGE_PORTS='eth2'
BRIDGE_STP='off'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NETWORK=''
PREFIXLEN=''
REMOTE_IPADDR=''
STARTMODE='onboot'
USERCONTROL='no'
IPV6INIT=yes
IPV6ADDR
=2A00:xxxx:2010:xxxx:1::2/112
IPV6_DEFAULTGW
=2A00:xxxx:2010:xxxx:0000:0000:0000:0001
IPV6_DEFAULTDEV
=br0 

Is there someting I have done wrong ?

Regards !!