The latest version of iproute2 package in SLES11-SP3-Updates is 2.6.29.1-6.35.1

However this seems to be outdated (or atleat before SocketCAN).
For example when I execute

Code:
    $ ip link set can0 type can help
I recieve the following
Code:
    Usage: ip link add link DEV [ name ] NAME
                       [ txqueuelen PACKETS ]
                       [ address LLADDR ]
                       [ broadcast LLADDR ]
                       [ mtu MTU ]
                       type TYPE [ ARGS ]
           ip link delete DEV type TYPE [ ARGS ]

           ip link set DEVICE [ { up | down } ]
                              [ arp { on | off } ]
                              [ dynamic { on | off } ]
                              [ multicast { on | off } ]
                              [ allmulticast { on | off } ]
                              [ promisc { on | off } ]
                              [ trailers { on | off } ]
                              [ txqueuelen PACKETS ]
                              [ name NEWNAME ]
                              [ address LLADDR ]
                              [ broadcast LLADDR ]
                              [ mtu MTU ]
                              [ netns PID ]
                              [ netns NAME ]
                              [ alias NAME ]
                                       [ vf NUM [ mac LLADDR ]
                                       [ vlan VLANID [ qos VLAN-QOS ] ]
                                       [ rate TXRATE ] ] 
                                       [ spoofchk { on | off} ] ] 
           ip link show [ DEVICE ]

    TYPE := { vlan | veth | dummy | ifb | macvlan }

But I expect the output to be this
Code:
    Usage: ip link set DEVICE type can
    	[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
    	[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
     	  phase-seg2 PHASE-SEG2 [ sjw SJW ] ]

    	[ loopback { on | off } ]
    	[ listen-only { on | off } ]
    	[ triple-sampling { on | off } ]

    	[ restart-ms TIME-MS ]
    	[ restart ]

    	Where: BITRATE       := { 1..1000000 }
    	       SAMPLE-POINT  := { 0.000..0.999 }
    	       TQ            := { NUMBER }
    	       PROP-SEG      := { 1..8 }
    	       PHASE-SEG1    := { 1..8 }
    	       PHASE-SEG2    := { 1..8 }
    	       SJW           := { 1..4 }
    	       RESTART-MS    := { 0 | NUMBER }
As decribed in https://www.kernel.org/doc/Documenta...orking/can.txt

Is there any planned updates for this package?

Yours Sincerely
Rikard Söderström