Hi all,

I installed SLES 11 SP3 on a new server DL380p gen , i used Intelligent provisioning procedure to install . The installation is correct the system boot on the hard disk but the DVD is not recognised by the OS , i checked the following thing :



# cat /proc/scsi/scsi

Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00

Vendor: HP Model: LOGICAL VOLUME Rev: 4.10

Type: Direct-Access ANSI SCSI revision: 05

Host: scsi0 Channel: 00 Id: 01 Lun: 00

Vendor: HP Model: LOGICAL VOLUME Rev: 4.10

Type: Direct-Access ANSI SCSI revision: 05

Host: scsi0 Channel: 01 Id: 00 Lun: 00

Vendor: HP Model: B320i Rev: 4.10

Type: RAID ANSI SCSI revision: 05

Host: scsi1 Channel: 03 Id: 00 Lun: 00

Vendor: HP Model: P222 Rev: 6.00

Type: RAID ANSI SCSI revision: 05

# cat /proc/scsi/sg/device_strs

HP LOGICAL VOLUME 4.10

HP LOGICAL VOLUME 4.10

HP B320i 4.10

HP P222 6.00

# rpm -qa | grep hpvsa-kmp

hpvsa-kmp-default-1.2.8-140.sles11sp3

# rpm -qa | grep dvd

dvd+rw-tools-7.1-35.21

# lsmod | grep sr

sr_mod 22353 0

cdrom 47069 2 sr_mod,ide_cd_mod

scsi_mod 235785 11 st,sr_mod,sg,sd_mod,scsi_dh_rdac,scsi_dh_hp_sw, ​ scsi_dh_alua,scsi_dh_emc,scsi_dh,hpvsa,hpsa

#



Have you an idea to help me , thank in advance

Regards

Franck