Hi ddgaikwad,
Quote Originally Posted by ddgaikwad View Post
So, that is why I am getting this, error, "Probing for new partitions......WARNING: Failed to probe new partitions" when I running sleha-join on the second node.
[...]
So, that means, its not supported to have sdb on the same disk as a separate partition...?
Right..?
in our current setup, we have SDB running on a partition of a shared device:

Code:
xen101:/usr/lib64/stonith/plugins/external # cat /etc/sysconfig/sbd
SBD_DEVICE="/dev/disk/by-id/scsi-1SCST_FIOe714a0bc-xenserver-lun0-part1"
SBD_OPTS="-W"
xen101:/usr/lib64/stonith/plugins/external # fdisk -l /dev/disk/by-id/scsi-1SCST_FIOe714a0bc-xenserver-lun0

Disk /dev/disk/by-id/scsi-1SCST_FIOe714a0bc-xenserver-lun0: 742 MB, 742694912 bytes
23 heads, 62 sectors/track, 1017 cylinders, total 1450576 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 524288 bytes
Disk identifier: 0xc792c14e

                                                 Device Boot      Start         End      Blocks   Id  System
/dev/disk/by-id/scsi-1SCST_FIOe714a0bc-xenserver-lun0-part1            2048       10239        4096   83  Linux
/dev/disk/by-id/scsi-1SCST_FIOe714a0bc-xenserver-lun0-part2           10240      215039      102400   83  Linux
xen101:/usr/lib64/stonith/plugins/external #
and we were using "sleha-join" to join the second node.

Have you made sure the device/partition you have configured on your first node, is available under the exact same name on the second node?

Regards,
Jens