Good day every1!

I do have strong problem with connecting my SUSE Linux Enterprise server 11 SP3 to SAN Disk storage system.

First of all i do not see my virtual FC adapters inside guest OS. I do see only another devices and do not have any chance to see and change adapters properties:

Code:
sles-hostname:~ #  lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA
Never the less I got WWPNs from VMM console, checked 'em available in the fabric and done the maping to IBM SVC storage.

The LUN mapped from SAN storage is not recognized properly. I do get fails like this:

1) I do see some disks with 2 paths instead of 4. All this paths are pretty strange. Look at this:

Code:
sles-hostname:~ #  ll /dev/sd* | grep -v sda
brw-rw---- 1 root disk 8, 16 Sep 18 11:20 /dev/sdb
brw-rw---- 1 root disk 8, 32 Sep 18 11:20 /dev/sdc
sles-hostname:~ #  ll /dev/disk/by-*/ | egrep -i "sdb|sdc"
lrwxrwxrwx 1 root root   9 Sep 18 11:20 scsi-360050768019c02417000000000000258 -> ../../sdb
lrwxrwxrwx 1 root root   9 Sep 18 11:20 wwn-0x60050768019c02417000000000000258 -> ../../sdb
lrwxrwxrwx 1 root root   9 Sep 18 11:20 vmbus-209ebb94:d858:4341:8719:9194ca09cb76-lun-0 -> ../../sdb
lrwxrwxrwx 1 root root   9 Sep 18 11:20 vmbus-882f6086:e688:44c2:9f40:4c674f469715-lun-0 -> ../../sdc
2) And finally the multipath daemon can't recognize them correctly:

Code:
sles-hostname:~ #  multipathd -k
multipathd> show status
path checker states:
up                  2

paths: 2
busy: False
multipathd> show paths
hcil    dev dev_t pri dm_st chk_st dev_st  next_check
4:0:0:0 sdb 8:16  -1  undef ready  running orphan
5:0:0:0 sdc 8:32  -1  undef ready  running orphan
Some lines from messages log:

Code:
sles-hostname:~ #  tail -12 /var/log/messages
Sep 23 11:07:10 sles-hostname multipathd: --------shut down-------
Sep 23 11:07:10 sles-hostname multipathd: sdb: couln't get asymmetric access state
Sep 23 11:07:10 sles-hostname kernel: [431220.455374] hv_storvsc vmbus_0_6: cmd 0xa3 scsi status 0x2 srb status 0x84
Sep 23 11:07:10 sles-hostname kernel: [431220.455377] hv_storvsc vmbus_0_6: stor pkt ffff8801f935b600 autosense data valid - len 20
Sep 23 11:07:10 sles-hostname kernel: [431220.455379] storvsc: Sense Key : Illegal Request [current]
Sep 23 11:07:10 sles-hostname kernel: [431220.455381] storvsc: Add. Sense: Invalid message error
Sep 23 11:07:10 sles-hostname multipathd: sdc: couln't get asymmetric access state
Sep 23 11:07:10 sles-hostname kernel: [431220.457295] hv_storvsc vmbus_0_7: cmd 0xa3 scsi status 0x2 srb status 0x84
Sep 23 11:07:10 sles-hostname kernel: [431220.457297] hv_storvsc vmbus_0_7: stor pkt ffff8801f6b22680 autosense data valid - len 20
Sep 23 11:07:10 sles-hostname kernel: [431220.457298] storvsc: Sense Key : Illegal Request [current]
Sep 23 11:07:10 sles-hostname kernel: [431220.457300] storvsc: Add. Sense: Invalid message error
Sep 23 11:07:10 sles-hostname multipathd: path checkers start up
And some more:

Code:
Sep 23 11:28:02 sles-hostname multipathd: sdb: couln't get asymmetric access state
Sep 23 11:28:02 sles-hostname multipathd: sdc: couln't get asymmetric access state


Plz! Need any help with SLES + Virtual FC on Hyper-V