SUSECON
Results 1 to 2 of 2

Thread: SLES 12 SP1 lose connection Hyper-V Legacy Network Adapter

Threaded View

  1. #1

    Exclamation SLES 12 SP1 lose connection Hyper-V Legacy Network Adapter

    Hi

    I am trying to install SLES 12 SP1 with OpenStack 6 on a Hyper-V environment based on Windows 2012R2 latest updates.

    In order to expand the OpenStack configuration with nodes a network or PXE boot is inevitable. In Hyper-V this feature is only available using the Legacy Network Adapter.

    Doing so everything runs fine (though some installation steps are executed 3 or more times before they are finished) and the Suse OpenStack Console shows that the cloud-admin, control-1 and compute-1 are ok until you stop them, change for example the memory settings to more, and then the Suse VM start but does no longer connect to the OpenStack admin LAN network on the required Legacy Network Adapter.

    The message given on the console is net eth0: 21140 transmit timed out, status fc.... resetting.... And this goes on forever.

    Because it is an automatic installation of OpenStack nodes root access can only be done by the root user on the cloud-admin node. Since there is no connection nothing can be done on the VM node itself to resolve the issue.

    Strangely enough I do not experience these issues on a Dell server but only on a HP Enterprise server, which is very strange because the OpenStack Admin LAN is a internal Hyper-V LAN, thus not connected to a physical network card (Software Only). Both the network and the network card are created by Microsoft and Suse and Microsoft claim full support.

    Having nowadays these kind of issues surprises me because MS and Suse have been in a relationship for so long.

    Does anyone knows what to do?

    Thanks in advance
    Roger

    PS: The network of the cloud-admin is eth0 Openstack Admin LAN (private hyper-V network) and eth1 Public LAN
    The network of the nodes is: eth0 Openstack Admin LAN (private hyper-V network) and eth1 Openstack Trunk LAN (private hyper-V network).

    On the nodes the eth0 adapter is a Hyper-V Legacy Network Adapter to enable network boot. Booting works but after some time it looks like Suse than changes the config of the adapter and the connection is lost (auto config). That does happen on HP and not on Dell.

    Both Microsoft and Suse claim full support of all Hyper-V features https://technet.microsoft.com/en-us/.../dn531027.aspx.

    I had a similar experience with Windows Server 2016 preview 4 on the HP. We downgraded to exclude all issues due to the preview release.

    Dell made a huge contribution to make sure that Suse OpenStack runs well on their systems. Check out /opt/dell and you find most of the stack there.

    PS network problems are an issue in Suse on Hyper-V: https://www.novell.com/support/kb/doc.php?id=7008116
    Last edited by rvunen1; 19-May-2016 at 10:19.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •