Results 1 to 5 of 5

Thread: SLED11SP1 update to SLED11SP2

  1. SLED11SP1 update to SLED11SP2

    Good day, I tried to post this before, but was not sure why it did not work. That being said, here is my dilemma, I have been using SLED11SP1 without any issues when I tried the migration process my video failed. I tried to lock the current video settings, after I reinstalled my software again, however; the video broke again, though I could reset it to 1400x990. Then my wireless network card would not initialize, is there anything that I can do to ensure that I can update, but yet not disable my system? I will provide more information as requested.

    Thank you,

  2. #2

    Re: SLED11SP1 update to SLED11SP2

    We'd need to know more about your hardware. Can you post the output
    Code:
    $ /sbin/lspci -knn
    When posting the output wrap it in code tags for readability. (Look for the # button when composing your post.)

    The output of this might be useful too.
    Code:
    $ zypper lr -u
    as would any error messages you're seeing.

  3. Re: SLED11SP1 update to SLED11SP2

    The output to the /sbin/lspci -knn

    00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
    Kernel modules: intel-agp
    00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 92)
    00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 02)
    Kernel modules: iTCO_wdt
    00:1f.2 RAID bus controller [0104]: Intel Corporation Mobile 82801 SATA RAID Controller [8086:282a] (rev 02)
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801
    01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M97 GL [ATI FirePro M7740] [1002:94a3]
    Kernel driver in use: fglrx_pci
    Kernel modules: fglrx
    01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket
    03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04)
    Kernel driver in use: ohci1394
    Kernel modules: ohci1394
    03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci-pci
    03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
    Kernel driver in use: ricoh-mmc
    Kernel modules: ricoh_mmc
    03:01.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 11)
    03:01.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)
    09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe [14e4:1680] (rev 10)
    Kernel driver in use: tg3
    Kernel modules: tg3
    0c:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
    Kernel driver in use: iwlagn
    Kernel modules: iwlagn

  4. Re: SLED11SP1 update to SLED11SP2

    The output of the zypper lr -u

    1 | ATI-Driver-SLE11-SP1 | ATI-Driver-SLE11-SP1 | Yes | Yes | http://www2.ati.com/suse/sle11sp1
    2 | SUSE-Linux-Enterprise-Desktop-11-SP1 11.1.1-1.133 | SUSE-Linux-Enterprise-Desktop-11-SP1 11.1.1-1.133 | Yes | No | cd:///?devices=/dev/sr0
    3 | nVidia-Driver-SLE11-SP1 | nVidia-Driver-SLE11-SP1 | Yes | Yes | http://download.nvidia.com/novell/sle11sp1
    4 | nu_novell_com:SLE-Likewise-5.3-Updates | SLE-Likewise-5.3-Updates | No | Yes | https://nu.novell.com/repo/$RCE/SLE-Likewise-5.3-Updates/sle-11-x86_64?credentials=NCCcredentials
    5 | nu_novell_com:SLE11-SP1-Debuginfo-Pool | SLE11-SP1-Debuginfo-Pool | No | Yes | https://nu.novell.com/repo/$RCE/SLE11-SP1-Debuginfo-Pool/sle-11-x86_64?credentials=NCCcredentials
    6 | nu_novell_com:SLE11-SP1-Debuginfo-Updates | SLE11-SP1-Debuginfo-Updates | No | Yes | https://nu.novell.com/repo/$RCE/SLE11-SP1-Debuginfo-Updates/sle-11-x86_64?credentials=NCCcredentials
    7 | nu_novell_com:SLED11-Extras | SLED11-Extras | No | Yes | https://nu.novell.com/repo/$RCE/SLED11-Extras/sle-11-x86_64?credentials=NCCcredentials
    8 | nu_novell_com:SLED11-SP1-Pool | SLED11-SP1-Pool | Yes | Yes | https://nu.novell.com/repo/$RCE/SLED11-SP1-Pool/sle-11-x86_64?credentials=NCCcredentials
    9 | nu_novell_com:SLED11-SP1-Updates | SLED11-SP1-Updates | Yes | Yes | https://nu.novell.com/repo/$RCE/SLED11-SP1-Updates/sle-11-x86_64?credentials=NCCcredentials

  5. #5

    Re: SLED11SP1 update to SLED11SP2

    Well you appear to still be running SP1 and the graphics and wifi are working (right?). To know what's wrong and how to fix it we really need to see what state the machine is in after you've updated to SP2. If the hardware works in SP1 it should work in SP2.

    When you updated to SP2 what process did you use and were there any errors or problems during the process?

    This thread makes reference to someone using the fglrx driver having an issue during upgrade to SP2, so worth having a look at that.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •