Hi all,
After migrate to SLED-11 SP2, the wireless driver is not working, So i was trying to build from source for new kernel.

But I got some error message,

naren_bishayee@linux-nxk1:~/Documents/Software/Broadcom wl driver> rpmbuild --rebuild broadcom-wl-5.60.48.36-19.1.src.rpm
Installing broadcom-wl-5.60.48.36-19.1.src.rpm
warning: InstallSourcePackage: Header V3 DSA signature: NOKEY, key ID d83ee527
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6200
+ umask 022
+ cd /usr/src/packages/BUILD
+ cd /usr/src/packages/BUILD
+ rm -rf broadcom-wl-5.60.48.36
+ /bin/mkdir -p broadcom-wl-5.60.48.36
+ cd broadcom-wl-5.60.48.36
+ /usr/bin/bzip2 -dc /usr/src/packages/SOURCES/hybrid-portsrc-v5.60.48.36.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
++ /usr/bin/id -u
+ '[' 1000 = 0 ']'
++ /usr/bin/id -u
+ '[' 1000 = 0 ']'
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ mv lib/wlc_hybrid.o_shipped.32 lib/wlc_hybrid.o_shipped
+ set -- lib Makefile README.txt src
+ mkdir source
+ mv lib Makefile README.txt src source/
+ mkdir obj
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.6200
+ umask 022
+ cd /usr/src/packages/BUILD
+ /bin/rm -rf /var/tmp/broadcom-wl-5.60.48.36-build
++ dirname /var/tmp/broadcom-wl-5.60.48.36-build
+ /bin/mkdir -p /var/tmp
+ /bin/mkdir /var/tmp/broadcom-wl-5.60.48.36-build
+ cd broadcom-wl-5.60.48.36
+ export 'EXTRA_CFLAGS=-DVERSION=\"5.60.48.36\"'
+ EXTRA_CFLAGS='-DVERSION=\"5.60.48.36\"'
+ for flavor in default pae trace xen
+ rm -rf obj/default
+ cp -r source obj/default
+ make -C /usr/src/linux-obj/i586/default modules M=/usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default
make: Entering directory `/usr/src/linux-3.0.13-0.27-obj/i386/default'
make -C ../../../linux-3.0.13-0.27 O=/usr/src/linux-3.0.13-0.27-obj/i386/default/. modules
CC [M] /usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default/src/shared/linux_osl.o
In file included from /usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default/src/shared/linux_osl.c:19:
/usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default/src/include/linuxver.h:23:28: error: linux/autoconf.h: No such file or directory
make[3]: *** [/usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default/src/shared/linux_osl.o] Error 1
make[2]: *** [_module_/usr/src/packages/BUILD/broadcom-wl-5.60.48.36/obj/default] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
make: Leaving directory `/usr/src/linux-3.0.13-0.27-obj/i386/default'
error: Bad exit status from /var/tmp/rpm-tmp.6200 (%build)


RPM build errors:
InstallSourcePackage: Header V3 DSA signature: NOKEY, key ID d83ee527
Bad exit status from /var/tmp/rpm-tmp.6200 (%build)
naren_bishayee@linux-nxk1:~/Documents/Software/Broadcom wl driver>



So, please some one help me, how i build my wireless driver.