# Activate subscription for more than one raspberry **URL:** \ **Category:** SLES for Raspberry Pi\ **Created:** [November 11, 2016, 4:51pm UTC](https://forums.suse.com/t/activate-subscription-for-more-than-one-raspberry/28956 "2016-11-11T16:51:14Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![fbenitez](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fbenitez](https://forums.suse.com/u/fbenitez)\ **Post date:** [November 11, 2016, 4:51pm UTC](https://forums.suse.com/t/activate-subscription-for-more-than-one-raspberry/28956/1 "2016-11-11T16:51:14Z")
Hi all, I have activated my subscription and as I can see in the SCC, it seems to be limited to one physical system. I am working on a project that requires several raspberrys in and I would like to keep all of them updated with the same subscription. Do you know if this is possible with the current self-support subcription? If were the case, is it possible to request additional registration codes? Thanks in advance. Regards. ---
**Author:** ![jlindholm](https://avatars.discourse-cdn.com/v4/letter/j/b5e925/32.png) [@jlindholm](https://forums.suse.com/u/jlindholm)\ **Post date:** [November 11, 2016, 5:35pm UTC](https://forums.suse.com/t/activate-subscription-for-more-than-one-raspberry/28956/2 "2016-11-11T17:35:23Z")
If you visit the web page below, a second code will be generated and synchronized to SCC. [http://tinyurl.com/slespi](http://tinyurl.com/slespi) It normally takes a minute or two for the new subscription to synchronize. Refresh the subscriptions tab on your UCxxxx organization, you will eventually see a new Raspberry Pi subscription. If you have any problems, send me a private message. Have a lot of Fun!! ---
**Author:** ![pjolson](https://avatars.discourse-cdn.com/v4/letter/p/71e660/32.png) [@pjolson](https://forums.suse.com/u/pjolson)\ **Post date:** [March 15, 2017, 11:22pm UTC](https://forums.suse.com/t/activate-subscription-for-more-than-one-raspberry/28956/3 "2017-03-15T23:22:54Z")
Every time I click the slespi link above, I’m shown the same registration code. I receive an email saying I have a new subscription, but no new subscription codes show up in the SCC subscriptions list (at least not over the last 24 hours). So I used the same number for all three of the Raspberry Pi’s I’ve set up for learning about clusters and multi-system management. Nothing balked during the installation. But now the subscriptions tab on the SCC page shows that I’ve got an overused subscription, the single code I used. In the details listing, all three systems show up for the single registration code. Is this the way it’s supposed to work, or should I have been issued three different subscription numbers? I only downloaded the software once and used that image for all three Pi’s. Any help will be appreciated. Thanks. ---
**Author:** ![ssaslavsky](https://avatars.discourse-cdn.com/v4/letter/s/bbe5ce/32.png) [@ssaslavsky](https://forums.suse.com/u/ssaslavsky)\ **Post date:** [March 27, 2017, 4:38pm UTC](https://forums.suse.com/t/activate-subscription-for-more-than-one-raspberry/28956/4 "2017-03-27T16:38:40Z")
[QUOTE=jlindholm;35237]If you visit the web page below, a second code will be generated and synchronized to SCC. [http://tinyurl.com/slespi](http://tinyurl.com/slespi) It normally takes a minute or two for the new subscription to synchronize. Refresh the subscriptions tab on your UCxxxx organization, you will eventually see a new Raspberry Pi subscription. If you have any problems, send me a private message. Have a lot of Fun!![/QUOTE] I keep getting the same Registration Code Over and Over again I tried to login out and in, empty the cache, from different browsers, and from different machines. As soon Suse asks for my email address I get the same original code If I try to re-use the same code, I get lot of errors during the installation Might be something changed since November…