# Arduino

**URL:** <https://forums.suse.com/t/arduino/25694>\
**Category:** SLED Applications\
**Created:** [June 6, 2014, 11:47am UTC](https://forums.suse.com/t/arduino/25694 "2014-06-06T11:47:09Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![susecmail](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@susecmail](https://forums.suse.com/u/susecmail)\
**Post date:** [June 6, 2014, 11:47am UTC](https://forums.suse.com/t/arduino/25694/1 "2014-06-06T11:47:09Z")

</div>

Does anybody have any experience in installing Arduino on SLED 11.3 (or 11.2 or 11.1)? I’m not having much luck with finding any version of it. I’ve added the 11.2 SLED CrossToolchain:avr repository but still no go…

---

<div class="post-metadata">

**Author:** ![mikewillis](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@mikewillis](https://forums.suse.com/u/mikewillis)\
**Post date:** [June 6, 2014, 12:47pm UTC](https://forums.suse.com/t/arduino/25694/2 "2014-06-06T12:47:51Z")

</div>

> [@susecmail;21812](#):
>
> Does anybody have any experience in installing Arduino on SLED 11.3 (or 11.2 or 11.1)? I’m not having much luck with finding any version of it. I’ve added the 11.2 SLED CrossToolchain:avr repository but still no go…

Did you look at  
[http://software.opensuse.org/package/arduino](http://software.opensuse.org/package/arduino)  
There’s a SLE 11 SP1 repo listed there.  
[http://download.opensuse.org/repositories/home:/seife:/arduino/SLE\_11\_SP1/](http://download.opensuse.org/repositories/home:/seife:/arduino/SLE_11_SP1/)  
The arduino package installs and runs on SP3 but I’ve not tried doing anything with it as I don’t have an arduino. You could try contacting the repo owner and asking them to add SP3 to the build list.

Can you not just download the .tgz from [http://arduino.cc/en/main/software](http://arduino.cc/en/main/software) and use that?

---

<div class="post-metadata">

**Author:** ![susecmail](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@susecmail](https://forums.suse.com/u/susecmail)\
**Post date:** [June 6, 2014, 6:42pm UTC](https://forums.suse.com/t/arduino/25694/3 "2014-06-06T18:42:44Z")

</div>

Good morning (at least here),

I tried to build it, even adding the CrossToolchain:avr and met a dependency hell situation. I’ve never built Arduino from scratch before, so it’s new territory for me.

I thought about adding the packman repo; however, I’m not sure what to use. They have the following:

~/SLE\_11/

~/sle\_11\_sp1/

~/openSUSE\_11.3/

~/11.3/

NOTE: Found a package install for SLED 11.3 of cross-avr-binutils: [http://software.opensuse.org/package/cross-avr-binutils](http://software.opensuse.org/package/cross-avr-binutils)

which is part of the dependency issue.

EDIT: Java SDK is a bit dated, as well; installing the package “ant” I’m getting java\_1\_5\_0, which was released in 2004 and is not generally compatible with Arduino. AFAIR, Arduino needs Java SDK 6 or better… still workiing on this one.

---

<div class="post-metadata">

**Author:** ![susecmail](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@susecmail](https://forums.suse.com/u/susecmail)\
**Post date:** [June 6, 2014, 8:18pm UTC](https://forums.suse.com/t/arduino/25694/4 "2014-06-06T20:18:52Z")

</div>

I tried to install avr-gcc-462 from the CrossToolchain:avr repository and it fails with

```auto
Problem: nothing provides avr-libc needed by avr-gcc-462-4.6.2-6.1.x86_64
  Solution 1: do not install avr-gcc-462-4.6.2-6.1.x86_64
  Solution 2: break avr-gcc-462-4.6.2-6.1.x86_64 by ignoring some of its dependencies
```

So, I find the avr-libc project, download the source and try to configure it and receive and error that avr-gcc is not compiled. Looking at the home page, I see this warning:

[SIZE=4]  
Warning:  
If you have CC set to anything other than avr-gcc in your environment, this will cause the configure script to fail. It is best to not have CC set at all.[/SIZE]

This seems a little like a catch-22 problem…unless, I’m missing something, which could be the case 😛

---

<div class="post-metadata">

**Author:** ![susecmail](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@susecmail](https://forums.suse.com/u/susecmail)\
**Post date:** [June 6, 2014, 9:27pm UTC](https://forums.suse.com/t/arduino/25694/5 "2014-06-06T21:27:24Z")

</div>

[QUOTE=mikewillis;21813]Did you look at  
[http://software.opensuse.org/package/arduino](http://software.opensuse.org/package/arduino)  
There’s a SLE 11 SP1 repo listed there.  
[http://download.opensuse.org/repositories/home:/seife:/arduino/SLE\_11\_SP1/](http://download.opensuse.org/repositories/home:/seife:/arduino/SLE_11_SP1/)  
The arduino package installs and runs on SP3 but I’ve not tried doing anything with it as I don’t have an arduino. You could try contacting the repo owner and asking them to add SP3 to the build list.

Can you not just download the .tgz from [http://arduino.cc/en/main/software](http://arduino.cc/en/main/software) and use that?[/QUOTE]

I tried installing the rpm found at the link and received the message that I needed cross-avr-gcc installed. Tried downloading the rpm for that and received:

```auto
Not Found

The requested URL /opensuse/repositories/home:/seife:/arduino/SLE_11_SP1/x86_64/cross-avr-gcc-4.3.3_20100125-34.1.x86_64.rpm was not found on this server.
Apache/2.2.15 (Red Hat) DAV/2 mod_auth_kerb/5.4 mod_auth_pgsql/2.0.3 mod_nss/2.2.15 NSS/3.15.1 Basic ECC PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.1e-fips SVN/1.6.11 mod_wsgi/3.2 Python/2.6.6 mod_perl/2.0.4 Perl/v5.10.1 Server at ftp.utexas.edu Port 80
```

Look at my other responses for the errors I receive trying to compile from scratch…

---

<div class="post-metadata">

**Author:** ![susecmail](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@susecmail](https://forums.suse.com/u/susecmail)\
**Post date:** [June 13, 2014, 10:05pm UTC](https://forums.suse.com/t/arduino/25694/6 "2014-06-13T22:05:31Z")

</div>

Okay, after a few tries, I found the (surprisingly easy) solution:

```auto
$: sudo zypper ar -f http://download.opensuse.org/repositories/home:/seife:/arduino/ Home:seife

$: sudo zypper refresh

[I]NOTE: Accept the package/repository key to the level with which your are comfortable[/I]

$: sudo zypper in arduino
```

It does NOT install via the One-Click install from [http://software.opensuse.org](http://software.opensuse.org). The individual RPMs do not install if downloaded from the repository http site.

If you have any security/privacy addons for Mozilla Firefox, the browser will not be able to navigate the links in [http://download.opensuse.org/repositories/\*](http://download.opensuse.org/repositories/*)

I am trying to find out which addon produces the error. I’ll update this thread once I narrow it down.
