# Deploy swarm cluster using rancher

**URL:** <https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491>\
**Category:** General\
**Created:** [April 17, 2016, 9:12am UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491 "2016-04-17T09:12:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![haythemelkhouly](https://avatars.discourse-cdn.com/v4/letter/h/b782af/32.png) [@haythemelkhouly](https://forums.suse.com/u/haythemelkhouly)\
**Post date:** [April 17, 2016, 9:12am UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491/1 "2016-04-17T09:12:19Z")

</div>

Hi All,  
i am newer with rancher and docker technology ,I need to deploy swarm cluster using rancher.  
what i did i added swarm environment then add 2 new server , i don’t know if this cluster swarm or not and if i added new container will it be installed on 2 swarm hosts ?

Regards,  
Haythem

---

<div class="post-metadata">

**Author:** ![denise](https://avatars.discourse-cdn.com/v4/letter/d/82dd89/32.png) [@denise](https://forums.suse.com/u/denise)\
**Post date:** [April 22, 2016, 4:42pm UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491/2 "2016-04-22T16:42:54Z")

</div>

After you added the 2 new server, is there at least 1 swarm and 1 swarm-agent container running?

---

<div class="post-metadata">

**Author:** ![haythemelkhouly](https://avatars.discourse-cdn.com/v4/letter/h/b782af/32.png) [@haythemelkhouly](https://forums.suse.com/u/haythemelkhouly)\
**Post date:** [April 22, 2016, 7:14pm UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491/3 "2016-04-22T19:14:38Z")

</div>

Hello Denise,  
Thanks for your response.  
On each new server i have defined two new hosts for each server and i have swarm agent on each node.  
How i can check if it is clustered or not

Regards,

---

<div class="post-metadata">

**Author:** ![AnthonySendra](https://avatars.discourse-cdn.com/v4/letter/a/ed8c4c/32.png) [@AnthonySendra](https://forums.suse.com/u/AnthonySendra)\
**Post date:** [May 3, 2016, 10:38am UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491/4 "2016-05-03T10:38:37Z")

</div>

Hello,

Same question here. I’ve deployed a Swarm environment on two hosts and now I want to deploy my application.  
I don’t understand what we need. When I try to deploy a project with docker-compose.yml, I have an error:

> Error (exit status 1: Creating network “kuzzle\_default” with the default driver 500 Internal Server Error: failed to parse pool request for address space “GlobalDefault” pool “” subpool “”: cannot find address space GlobalDefault (most likely the backing datastore is not configured) )

What I understand is we need to use a value-key storage like Consul? But how can we configure it?  
Maybe a short blog post or a quick tuto could be really helpful on this subject (Rancher + Swarm + Multi Host).

Regards  
(thanks for Rancher btw, I really enjoy to play with it!)

---

<div class="post-metadata">

**Author:** ![danipolo](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/danipolo/32/1571_2.png) [@danipolo](https://forums.suse.com/u/danipolo)\
**Post date:** [September 1, 2016, 7:57am UTC](https://forums.suse.com/t/deploy-swarm-cluster-using-rancher/2491/5 "2016-09-01T07:57:40Z")

</div>

Hello,

Same situation here… A post to do this will be VERY appreciated.

**Rancher HA + Swarm + Multiple Host**

I think this config must be very common 🙂

Thanks!