# DRM inquiry to Backported drm kernel modules.

**URL:** <https://forums.suse.com/t/drm-inquiry-to-backported-drm-kernel-modules/32765>\
**Category:** SLES Install-Boot\
**Created:** [August 2, 2018, 3:01pm UTC](https://forums.suse.com/t/drm-inquiry-to-backported-drm-kernel-modules/32765 "2018-08-02T15:01:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![johnirizari](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@johnirizari](https://forums.suse.com/u/johnirizari)\
**Post date:** [August 2, 2018, 3:01pm UTC](https://forums.suse.com/t/drm-inquiry-to-backported-drm-kernel-modules/32765/1 "2018-08-02T15:01:56Z")

</div>

The main goal is to have the SLES12 SP3 kernel version 4.4.140-94.42.1 the fix it needed for Kabylake graphics issue and also enable the dp aux character device CONFIG\_DRM\_DP\_AUX\_CHARDEV=y.

I like to inquiry if there’s a way or how to proceed with this correctly.

My question is I have a Intel Kabylake graphics and the Linux OS I installed in my system is SLES12 SP3 with kernel version 4.4.140-94.42.1. To support and fix the Kabylake graphics issue under this kernel I also installed/updated the drm-kmp-default which is a backported drm kernel modules. From here, I also wanted to enable the CONFIG\_DRM\_DP\_AUX\_CHARDEV=y.

It seems to me the drm-kmp-default file (\*.ko) are built by default and the CONFIG\_DRM\_DP\_AUX\_CHARDEV=n is disable. Is there a possible way to enable this? Or how to approach with this problem?

If I rebuild the drm-kmp-default into my kernel version 4.4.140-94.42.1 source, I got a lot of errors because I assume the drm-kmp-default is under a higher drm version which is 4.9.

Please advise and have comments.

Kernel version list:  
SUSE/SLES/Kernel versions - MicroFocusInternationalWiki

drm-kmp-default site:  
[https://software.opensuse.org/package/drm-kmp-default](https://software.opensuse.org/package/drm-kmp-default)

---

<div class="post-metadata">

**Author:** ![Automatic\_Reply](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Automatic\_Reply](https://forums.suse.com/u/Automatic_Reply)\
**Post date:** [August 8, 2018, 7:30am UTC](https://forums.suse.com/t/drm-inquiry-to-backported-drm-kernel-modules/32765/2 "2018-08-08T07:30:26Z")

</div>

johnirizari,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

These forums are peer-to-peer, best effort, volunteer run and that if your issue  
is urgent or not getting a response, you might try one of the following options:

- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all  
the other support options available.
- Open a service request: [https://www.suse.com/support](https://www.suse.com/support)
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)

If this is a reply to a duplicate posting or otherwise posted in error, please  
ignore and accept our apologies and rest assured we will issue a stern reprimand  
to our posting bot…

Good luck!

Your SUSE Forums Team  
[http://forums.suse.com](http://forums.suse.com)
