# Elantech Touchpad (not working scroll or tapping)
**URL:** https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286
**Category:** SLED Hardware
**Created:** [March 23, 2014, 8:25am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286 "2014-03-23T08:25:20Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@LFAO200591](https://forums.suse.com/u/LFAO200591)
#### Post date: [March 23, 2014, 8:25am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/1 "2014-03-23T08:25:20Z")
Hi!
Well as the title say, in SLED 11 SP3 is working extremely good, i love it!.
but the touchpad doesnt work fully.
i want the scroll and the tapping : ( !!!
Thank you, anyway.
---
### Author:  [@system](https://forums.suse.com/u/system)
#### Post date: [March 27, 2014, 2:30pm UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/2 "2014-03-27T14:30:34Z")
LFAO200591,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your issue been resolved? If not, you might try one of the following options:
- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all
the other support options available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))
Be sure to read the forum FAQ about what to expect in the way of responses:
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your SUSE Forums Team
[http://forums.suse.com](http://forums.suse.com)
---
### Author:  [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)
#### Post date: [April 3, 2014, 12:21am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/3 "2014-04-03T00:21:01Z")
> [@](#):
>
> On Sun 23 Mar 2014 06:34:01 AM CDT, LFAO200591 wrote:
>
> Hi!
> Well as the title say, in SLED 11 SP3 is working extremely good, i love
> it!.
> but the touchpad doesnt work fully.
> i want the scroll and the tapping : ( !!!
>
> Thank you, anyway.
Hi
What graphics card do you have? Have you tried the sax2 command to
configure your touchpad?
```auto
hwinfo --gfxcard
```
You need to know the graphics driver in use when re-configuring the
xorg.conf file via this tool.
–
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
openSUSE 13.1 (Bottle) (x86\_64) GNOME 3.10.1 Kernel 3.11.10-7-desktop
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
---
### Author:  [@LFAO200591](https://forums.suse.com/u/LFAO200591)
#### Post date: [April 19, 2014, 10:14am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/4 "2014-04-19T10:14:54Z")
Excuse me for the terrible delay.
Hope helps.
# hwinfo --gfxcard
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.323]
UDI: /org/freedesktop/Hal/devices/pci\_8086\_106
Unique ID: \_Znp.Y9AXSxcSn\_7
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: “Intel HD Graphics”
Vendor: pci 0x8086 “Intel Corporation”
Device: pci 0x0106 “HD Graphics”
SubVendor: pci 0x144d “Samsung Electronics Co Ltd”
SubDevice: pci 0xc606
Revision: 0x09
Driver: “i915”
Driver Modules: “drm”
Memory Range: 0x90000000-0x903fffff (rw,non-prefetchable)
Memory Range: 0x80000000-0x8fffffff (ro,non-prefetchable)
I/O Ports: 0x3000-0x303f (rw)
IRQ: 41 (11772 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: “pci:v00008086d00000106sv0000144Dsd0000C606bc03sc00i00”
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
Oh by the way, sax2 doesnt help me at all!! i already tried that.
---
### Author:  [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)
#### Post date: [April 20, 2014, 4:57am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/5 "2014-04-20T04:57:21Z")
Hi
So the synaptics driver is installed? Have you looked at the touchpan settings with gconf-editor?
---
### Author:  [@LFAO200591](https://forums.suse.com/u/LFAO200591)
#### Post date: [April 20, 2014, 10:19am UTC](https://forums.suse.com/t/elantech-touchpad-not-working-scroll-or-tapping/25286/6 "2014-04-20T10:19:25Z")
Actually the tapping function just worked the other day, and i didnt do anything about that.
But the Scroll function is enabled as an integer, 1 is for activated, but thats not true cause i cant scroll down when needed.
…