# Hibernate Laptop

**URL:** <https://forums.suse.com/t/hibernate-laptop/29390>\
**Category:** SLED Applications\
**Created:** [February 21, 2017, 8:23pm UTC](https://forums.suse.com/t/hibernate-laptop/29390 "2017-02-21T20:23:43Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![hcp\_dk](https://avatars.discourse-cdn.com/v4/letter/h/74df32/32.png) [@hcp\_dk](https://forums.suse.com/u/hcp_dk)\
**Post date:** [February 21, 2017, 8:23pm UTC](https://forums.suse.com/t/hibernate-laptop/29390/1 "2017-02-21T20:23:43Z")

</div>

This may be in Gnome difficult. Suspend is not hibernate.

You need to go into “Settings” - “Power” → Suspend and Power button.  
here adjust: When the Power button is pressed: Hibernate

Then, when pressing the power button, the Laptop hibernate usually with less energy consumption.

---

<div class="post-metadata">

**Author:** ![Automatic\_Reply](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Automatic\_Reply](https://forums.suse.com/u/Automatic_Reply)\
**Post date:** [February 27, 2017, 7:30am UTC](https://forums.suse.com/t/hibernate-laptop/29390/2 "2017-02-27T07:30:43Z")

</div>

hcp,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

These forums are peer-to-peer, best effort, volunteer run and that if your issue  
is urgent or not getting a response, you might try one of the following options:

- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all  
the other support options available.
- Open a service request: [https://www.suse.com/support](https://www.suse.com/support)
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)

If this is a reply to a duplicate posting or otherwise posted in error, please  
ignore and accept our apologies and rest assured we will issue a stern reprimand  
to our posting bot…

Good luck!

Your SUSE Forums Team  
[http://forums.suse.com](http://forums.suse.com)

---

<div class="post-metadata">

**Author:** ![hcp\_dk](https://avatars.discourse-cdn.com/v4/letter/h/74df32/32.png) [@hcp\_dk](https://forums.suse.com/u/hcp_dk)\
**Post date:** [March 12, 2017, 7:11pm UTC](https://forums.suse.com/t/hibernate-laptop/29390/3 "2017-03-12T19:11:05Z")

</div>

I got support on this issue:  
It works like this:  
Change in All Settings (Gnome) - Hardware - Power - “When the power button is pressed” to Hibernating.  
Then, when close the lid, nothing happens.  
But when pressing power button, the system goes into Hibernating mode.  
Press power button again, the system wakes up.  
This works in fact quite reliable on my Laptop.

---

<div class="post-metadata">

**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\
**Post date:** [March 12, 2017, 7:37pm UTC](https://forums.suse.com/t/hibernate-laptop/29390/4 "2017-03-12T19:37:57Z")

</div>

Hi  
This can also be configured via /etc/systemd/logind.conf I set HandleLidSwitch=ignore, because I don’t want suspend or hibernate. The man page for logind.conf explains all the settings.
