# How to get client IP?

**URL:** <https://forums.suse.com/t/how-to-get-client-ip/15206>\
**Category:** SUSE Rancher Prime\
**Created:** [September 3, 2019, 2:36pm UTC](https://forums.suse.com/t/how-to-get-client-ip/15206 "2019-09-03T14:36:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![renankaic](https://avatars.discourse-cdn.com/v4/letter/r/a5b964/32.png) [@renankaic](https://forums.suse.com/u/renankaic)\
**Post date:** [September 3, 2019, 2:36pm UTC](https://forums.suse.com/t/how-to-get-client-ip/15206/1 "2019-09-03T14:36:05Z")

</div>

Hello.

I deployed a pod with a NodeJS application. This application needs to check if the remote client IP address has access to the API.

When I run this application outside of a rancher pod it runs fine.

But, after I deployed it to my rancher I became unable to get the remote client IP address.

I’m using Ingress (L7 Ingress ) trying to get the header “X-REAL-IP” but his value is always “10.127.0.8” or “10.127.0.7” instead of the original remote client IP. I already set some annotations for the Load Balancer as shows below:

![Screenshot_1](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/3/3f29a7b68f6cc7d5b0b16cb0e59fdbfbb5bf6a04.png)

Unfortunately, none of them worked.

Please, is there anything else that I should do to be able to get the client remote IP?

Thank you.