# Installation behind proxy **URL:** \ **Category:** SLES Install-Boot\ **Created:** [July 27, 2018, 2:26pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737 "2018-07-27T14:26:02Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![michael\_backmann](https://avatars.discourse-cdn.com/v4/letter/m/b5ac83/32.png) [@michael\_backmann](https://forums.suse.com/u/michael_backmann)\ **Post date:** [July 27, 2018, 2:26pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/1 "2018-07-27T14:26:02Z")
Hello, is there a solution to install and register SLES 15 behind a proxy? It is not possible to configure a proxy in the network configuration mask and I don’t see the text field “Custom Boot Options” on the first page of installation to set a proxy there. ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [July 27, 2018, 8:28pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/2 "2018-07-27T20:28:09Z")
On 27/07/18 12:34, michael backmann wrote: [color=blue] > is there a solution to install and register SLES 15 behind a proxy? It > is not possible to configure a proxy in the network configuration mask > and I don’t see the text field “Custom Boot Options” on the first page > of installation to set a proxy there.[/color] Please see [https://doc.opensuse.org/documentation/leap/startup/html/book.opensuse.startup/cha.boot\_parameters.html#sec.boot\_parameters.advanced.proxy](https://doc.opensuse.org/documentation/leap/startup/html/book.opensuse.startup/cha.boot_parameters.html#sec.boot_parameters.advanced.proxy) (though ignore the extraneous “l\>” at the start of the proxy parameter example which I’ve just reported). SLE15 and openSUSE Leap 15 are closely aligned. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![michael\_backmann](https://avatars.discourse-cdn.com/v4/letter/m/b5ac83/32.png) [@michael\_backmann](https://forums.suse.com/u/michael_backmann)\ **Post date:** [July 30, 2018, 4:48pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/3 "2018-07-30T16:48:04Z")
[QUOTE=smflood;53689]On 27/07/18 12:34, michael backmann wrote: [color=blue] > is there a solution to install and register SLES 15 behind a proxy? It > is not possible to configure a proxy in the network configuration mask > and I don’t see the text field “Custom Boot Options” on the first page > of installation to set a proxy there.[/color] Please see [https://doc.opensuse.org/documentation/leap/startup/html/book.opensuse.startup/cha.boot\_parameters.html#sec.boot\_parameters.advanced.proxy](https://doc.opensuse.org/documentation/leap/startup/html/book.opensuse.startup/cha.boot_parameters.html#sec.boot_parameters.advanced.proxy) (though ignore the extraneous “l\>” at the start of the proxy parameter example which I’ve just reported). SLE15 and openSUSE Leap 15 are closely aligned. ## HTH. Simon SUSE Knowledge Partner * * * If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ------------------------------------------------------------------------[/QUOTE] Thank you. I also found this, but I did not find the right place, where I could enter this. Is it the right way to switch to one of the other consoles while installing and to type it? ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [July 30, 2018, 6:43pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/4 "2018-07-30T18:43:36Z")
On 30/07/18 14:54, michael backmann wrote: [color=blue] > Thank you. I also found this, but I did not find the right place, where > I could enter this. Is it the right way to switch to one of the other > consoles while installing and to type it?[/color] No, on the initial install boot screen (see figure 7-1 at [https://www.suse.com/documentation/sles-15/book\_sle\_deployment/data/sec\_boot\_parameters\_start\_x86\_64.html](https://www.suse.com/documentation/sles-15/book_sle_deployment/data/sec_boot_parameters_start_x86_64.html) ) you would enter proxy=… in the Boot Options field. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![michael\_backmann](https://avatars.discourse-cdn.com/v4/letter/m/b5ac83/32.png) [@michael\_backmann](https://forums.suse.com/u/michael_backmann)\ **Post date:** [July 31, 2018, 10:16am UTC](https://forums.suse.com/t/installation-behind-proxy/32737/5 "2018-07-31T10:16:35Z")
Yes, I had this option in SLES 12.3, too. But it seems to be vanished in SLES 15 (see screenshot [https://ibb.co/iXGKjT](https://ibb.co/iXGKjT)). Is there an option to make it visible? ---
**Author:** ![Eugen](https://avatars.discourse-cdn.com/v4/letter/e/ebca7d/32.png) [@Eugen](https://forums.suse.com/u/Eugen)\ **Post date:** [July 31, 2018, 11:04am UTC](https://forums.suse.com/t/installation-behind-proxy/32737/6 "2018-07-31T11:04:58Z")
> [@michael\_backmann;53709](#): > > Yes, I had this option in SLES 12.3, too. But it seems to be vanished in SLES 15 (see screenshot [https://ibb.co/iXGKjT](https://ibb.co/iXGKjT)). Is there an option to make it visible? That’s weird, when I see the first boot screen and the active selection is on “Boot from Hard Disk” there aren’t any boot options visible. They appear as soon as I choose “Installation”, but your screenshot shows already the correct choice but not boot options. What is the source of your installation? I just downloaded DVD-1.iso and started a test installation where the boot options are available. ---
**Author:** ![michael\_backmann](https://avatars.discourse-cdn.com/v4/letter/m/b5ac83/32.png) [@michael\_backmann](https://forums.suse.com/u/michael_backmann)\ **Post date:** [July 31, 2018, 1:27pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/7 "2018-07-31T13:27:07Z")
I just checked again. I don’t have it on 12.3 either ☹ I downloaded the image from the official SUSE site, I also tried a new download today with the same result ([https://ibb.co/m7AMyo](https://ibb.co/m7AMyo)). Maybe it is depending on the operating system? I try to do the installation on Microsoft Server 2012 R2 Hyper V host. ---
**Author:** ![Eugen](https://avatars.discourse-cdn.com/v4/letter/e/ebca7d/32.png) [@Eugen](https://forums.suse.com/u/Eugen)\ **Post date:** [July 31, 2018, 1:39pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/8 "2018-07-31T13:39:50Z")
> [@michael\_backmann;53713](#): > > Maybe it is depending on the operating system? I try to do the installation on Microsoft Server 2012 R2 Hyper V host. I can’t rule that out, but of course that could be the difference. I installed it on a KVM hypervisor and it works fine. ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [August 3, 2018, 6:59pm UTC](https://forums.suse.com/t/installation-behind-proxy/32737/9 "2018-08-03T18:59:58Z")
On 31/07/18 11:34, michael backmann wrote: [color=blue] > I just checked again. I don’t have it on 12.3 either ☹ I downloaded the > image from the official SUSE site, I also tried a new download today > with the same result ([https://ibb.co/m7AMyo](https://ibb.co/m7AMyo)). Maybe it is depending on > the operating system? I try to do the installation on Microsoft Server > 2012 R2 Hyper V host.[/color] Any luck? I’m using VirtualBox on openSUSE Leap and as soon as I move from “Boot from Hard Disk” the Boot Options field appears. I’m booting from the SLE-15-Installer-DVD-x86\_64-GM-DVD1.iso file as a virtual CD. I will note however that my boot screen looks a bit different to yours - [http://susepaste.org/37976083](http://susepaste.org/37976083) is with “Boot from Hard Disk” selected - [http://susepaste.org/65789780](http://susepaste.org/65789780) is after changing the selection You’ll notice in both that I have Function Key definitions listed across the bottom of the screen plus the chameleon is smaller and in top left. Presumably by “image” you mean an ISO file? Which one are you booting from? ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![jan\_foerster](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@jan\_foerster](https://forums.suse.com/u/jan_foerster)\ **Post date:** [September 11, 2018, 11:57am UTC](https://forums.suse.com/t/installation-behind-proxy/32737/10 "2018-09-11T11:57:02Z")
[QUOTE=michael\_backmann;53687]Hello, is there a solution to install and register SLES 15 behind a proxy? It is not possible to configure a proxy in the network configuration mask and I don’t see the text field “Custom Boot Options” on the first page of installation to set a proxy there.[/QUOTE] For all those people out there who do’t see these options: These options are only shown on “BIOS” installations (e.g. ESX Server). If you chosse installation via EFI/UEFI Bios, these options are not shown as an security feature ☹ Greetings from Hamburg … Jan