# Installation suse cloud 6-problem **URL:** \ **Category:** SUSE OpenStack Cloud\ **Created:** [September 12, 2016, 11:47pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628 "2016-09-12T23:47:18Z")\ **Posts on this page:** 18\ **Page:** 2
**Author:** ![Eugen](https://avatars.discourse-cdn.com/v4/letter/e/ebca7d/32.png) [@Eugen](https://forums.suse.com/u/Eugen)\ **Post date:** [September 14, 2016, 4:06pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/21 "2016-09-14T16:06:18Z")
> [@](#): > > now i got another i think missing pattern now is dhcp3 [https://www.dropbox.com/s/nzndh2jnmu…rror4.PNG?dl=0](https://www.dropbox.com/s/nzndh2jnmu...rror4.PNG?dl=0). Sounds about right, try to install that, too and see what’s coming next. > [@](#): > > before runnig crowbar script i have connection to internet after runing this script connection is gone and i must reset interfaces to get connection to internet . Check your network.json file in /etc/crowbar/, to me it sounds like this could be the reason why your connection is lost after running crowbar script. I don’t know if it helps, but here’s my output of my network.json: `{ "attributes": { "network": { "start_up_delay": 30, "enable_tx_offloading": false, "enable_rx_offloading": false, "teaming": { "mode": 4 }, "mode": "team", "interface_map": [ { "pattern": "X9DRT", "bus_order": [ "0000:00/0000:00:01.1/0000:02:00.0", "0000:00/0000:00:01.1/0000:02:00.1" ] } ], "conduit_map": [ { "pattern": "team/2/.*", "conduit_list": { "intf2": { "if_list": [ "+1g1", "+1g2" ] }, "intf1": { "if_list": [ "+1g1", "+1g2" ] }, "intf0": { "if_list": [ "+1g1", "+1g2" ] } } }, { "pattern": "team/1/.*", "conduit_list": { "intf2": { "if_list": [ "?1g1" ], "team_mode": 0 }, "intf1": { "if_list": [ "?1g1" ] }, "intf0": { "if_list": [ "?1g1" ] } } }, { "pattern": "team/.*/.*", "conduit_list": { "intf2": { "if_list": [ "1g1", "1g2" ] }, "intf1": { "if_list": [ "1g1", "1g2" ] }, "intf0": { "if_list": [ "1g1", "1g2" ] } } } ], "networks": { "nova_fixed": { "add_bridge": false, [...]` But I didn’t modify that file myself, it was a colleague who knows networking way better than me. I left out the part with the networks (fixed, floating, etc.), I believe you can use the defaults here. For reference, my admin server is also a VM (xen), but they only have one interface (eth0): [CODE]root@admin1:~ # ip link list 1: lo: \ mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: \ mtu 1500 qdisc pfifo\_fast state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 00:16:3e:00:20:00 brd ff:ff:ff:ff:ff:ff root@admin1:~ # ip address show eth0 2: eth0: \ mtu 1500 qdisc pfifo\_fast state UNKNOWN group default qlen 1000 link/ether 00:16:3e:00:20:00 brd ff:ff:ff:ff:ff:ff inet 192.168.124.129/24 brd 192.168.124.255 scope global eth0 valid\_lft forever preferred\_lft forever inet6 fe80::216:3eff:fe00:2000/64 scope link valid\_lft forever preferred\_lft forever [/CODE] Hope this helps! ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 14, 2016, 5:08pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/22 "2016-09-14T17:08:09Z")
On 14/09/16 13:54, pracadyplomowa20 wrote: [color=blue] > pracadyplomowa20;34296 Wrote:[color=green] > > > so i installed dnsmsql rerun installation internet connection is gone > > again this is from > > [https://www.dropbox.com/s/cr8k3jq7si0c1hq/repo\_setup.PNG?dl=0](https://www.dropbox.com/s/cr8k3jq7si0c1hq/repo_setup.PNG?dl=0) > > before runnig crowbar script i have connection to internet after runing > > this script connection is gone and i must reset interfaces to get > > connection to internet .[/color] > > now i got another i think missing pattern now is dhcp3 > [https://www.dropbox.com/s/nzndh2jnmuhxn1b/error4.PNG?dl=0](https://www.dropbox.com/s/nzndh2jnmuhxn1b/error4.PNG?dl=0).[/color] Both of the above Dropbox links don’t show a graphic. My SOC6 setup in a private network under VirtualBox on Linux does not have access to the internet (or any other network for that matter - it’s private with no NAT). I did not have to mess with the network.json file. Given you’re having trouble installing packages where are you installing from? Sounds like remote repos which obviously need a working network connection. Perhaps try attaching ISOs as virtual DVD drives (I attach both the SLES12 SP1 DVD1 and SOC6 DVD ISOs) which will allow the install to find all the packages it needs. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 14, 2016, 5:11pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/23 "2016-09-14T17:11:24Z")
On 14/09/16 11:34, pracadyplomowa20 wrote: [color=blue] > here are /etc/hosts : > > [https://www.dropbox.com/s/1kzq78xdt1yswga/etcHost.PNG?dl=0](https://www.dropbox.com/s/1kzq78xdt1yswga/etcHost.PNG?dl=0)[/color] I wonder whether having a short name of AdminNode which is different to that in the fully qualified host name [admin2.example.com](http://admin2.example.com) causes problems? The documentation has “192.168.124.10 [admin.cloud.example.com](http://admin.cloud.example.com) admin” which I also use with no problem but given your later replies I think it’s ultimately a networking issue … ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 14, 2016, 5:13pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/24 "2016-09-14T17:13:18Z")
On 14/09/16 15:08, Simon Flood wrote: [color=blue] > My SOC6 setup in a private network under VirtualBox on Linux does not > have access to the internet (or any other network for that matter - it’s > private with no NAT). I did not have to mess with the network.json file. > > Given you’re having trouble installing packages where are you installing > from? Sounds like remote repos which obviously need a working network > connection. Perhaps try attaching ISOs as virtual DVD drives (I attach > both the SLES12 SP1 DVD1 and SOC6 DVD ISOs) which will allow the install > to find all the packages it needs.[/color] A thought - SOC6 expects the router IP address to be 192.168.124.1 but you’re using NAT which if VirtualBox is anything like VMware desktop products might reserve that for bridge interface with 192.168.124.2 as router. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 11:03am UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/25 "2016-09-15T11:03:58Z")
[QUOTE=smflood;34302]On 14/09/16 11:34, pracadyplomowa20 wrote: [color=blue] > here are /etc/hosts : > > [https://www.dropbox.com/s/1kzq78xdt1yswga/etcHost.PNG?dl=0](https://www.dropbox.com/s/1kzq78xdt1yswga/etcHost.PNG?dl=0)[/color] I wonder whether having a short name of AdminNode which is different to that in the fully qualified host name [admin2.example.com](http://admin2.example.com) causes problems? The documentation has “192.168.124.10 [admin.cloud.example.com](http://admin.cloud.example.com) admin” which I also use with no problem but given your later replies I think it’s ultimately a networking issue … ## HTH. Simon SUSE Knowledge Partner * * * If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ------------------------------------------------------------------------[/QUOTE] Ok i manage install it , but the problem is . When i want launch another node vie pxe it work [https://www.dropbox.com/s/budl5p6ou585mqx/node1.PNG?dl=0](https://www.dropbox.com/s/budl5p6ou585mqx/node1.PNG?dl=0) but when i check dash board that node don’t show up. I add in Provisioner root\_password\_hash, but what about login?. I don’t know what worked previ i just put both cd into cd-room sles12 sp1 and cloud and remove gateway from routing and cloud has been installed. ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 15, 2016, 1:13pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/26 "2016-09-15T13:13:41Z")
On 15/09/16 09:04, pracadyplomowa20 wrote: [color=blue] > Ok i manage install it , but the problem is . When i want launch > another node vie pxe it work > [https://www.dropbox.com/s/budl5p6ou585mqx/node1.PNG?dl=0](https://www.dropbox.com/s/budl5p6ou585mqx/node1.PNG?dl=0) but when i > check dash board that node don’t show up. I add in Provisioner > root\_password\_hash, but what about login?[/color] If the new node PXE boots then check /var/log/crowbar/sledgehammer/\..transcript (also present on newly booted node which you should be able to SSH to from the Admin Server) which should indicate why it’s not showing up in the Dashboard. My guess is time synchronisation not being set up on the Admin Server or is out of sync. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![Eugen](https://avatars.discourse-cdn.com/v4/letter/e/ebca7d/32.png) [@Eugen](https://forums.suse.com/u/Eugen)\ **Post date:** [September 15, 2016, 3:17pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/27 "2016-09-15T15:17:20Z")
[QUOTE]My guess is time synchronisation not being set up on the Admin Server or is out of sync. [/QUOTE] Without knowing the results yet, I assume smflood is right, I had the same issue at the beginning of my installations. Make sure that you have the ntp barclamp configured with a ntp server and this server is reachable for the new nodes. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 3:19pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/28 "2016-09-15T15:19:09Z")
Y it is ntp . but how configure it i do this [https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0](https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0) ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 15, 2016, 3:56pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/29 "2016-09-15T15:56:42Z")
On 15/09/16 13:24, pracadyplomowa20 wrote: [color=blue] > Y it is ntp . but how configure it i do this > [https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0](https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0)[/color] Which server/node is that ntp.conf file from? You need to have time synchronisation set up and working on the Admin Server _before_ running install-suse-cloud as you can’t make changes to the NTP configuration on the Admin Server afterwards (since Chef will interfere). If your nodes will have access to an external time source you might be able to set the NTP Barclamp to point to that time source - it’s currently likely to be pointing to a broken or unreachable one. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 4:18pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/30 "2016-09-15T16:18:02Z")
[QUOTE=smflood;34322]On 15/09/16 13:24, pracadyplomowa20 wrote: [color=blue] > Y it is ntp . but how configure it i do this > [https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0](https://www.dropbox.com/s/i90t0ng6qcjg124/ntp.PNG?dl=0)[/color] Which server/node is that ntp.conf file from? You need to have time synchronisation set up and working on the Admin Server _before_ running install-suse-cloud as you can’t make changes to the NTP configuration on the Admin Server afterwards (since Chef will interfere). If your nodes will have access to an external time source you might be able to set the NTP Barclamp to point to that time source - it’s currently likely to be pointing to a broken or unreachable one. ## HTH. Simon SUSE Knowledge Partner * * * If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ------------------------------------------------------------------------[/QUOTE] its form my admin node , and i don’t have internet connection now since i run install-suse-cloud from website ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 15, 2016, 4:39pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/31 "2016-09-15T16:39:02Z")
On 15/09/16 14:24, pracadyplomowa20 wrote: [color=blue] > its form my admin node , and i don’t have internet connection now since > i run install-suse-cloud from website[/color] Hmm … I solved this by configuring NTP on my openSUSE host machine to respond to NTP requests from 192.168.124.0/24. Not sure if/how you can do this with Windows 10. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 4:44pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/32 "2016-09-15T16:44:14Z")
[QUOTE] If your nodes will have access to an external time source you might be able to set the NTP Barclamp to point to that time source - it’s currently likely to be pointing to a broken or unreachable one. [/QUOTE] What do you mean by that i don’t event know what login is set up on those nodes. What is default login on it? ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 4:58pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/33 "2016-09-15T16:58:47Z")
hmm i installed ntp on windows but i don’t think it will works since what i understand after install suse cloud script network is isolated form outside im correct? ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 15, 2016, 5:22pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/34 "2016-09-15T17:22:22Z")
> [@pracadyplomowa20;34326](#): > > hmm i installed ntp on windows but i don’t think it will works since what i understand after install suse cloud script network is isolated form outside im correct? OK i done this i just make another vm with latest ubuntu connected him to natNetwork (adminnode) and set up ntp conf now i see nodes 🙂 ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [September 15, 2016, 5:19pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/35 "2016-09-15T17:19:43Z")
On 15/09/16 14:54, pracadyplomowa20 wrote: [color=blue] > What do you mean by that i don’t event know what login is set up on > those nodes. What is default login on it?[/color] In the Dashboard running on the Admin Server so [http://192.168.124.10/](http://192.168.124.10/) select Barclamps \> Crowbar then edit NTP Management. ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 16, 2016, 12:49pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/36 "2016-09-16T12:49:47Z")
now i have another problem yesterday i launch to establish controller node compute and everythink went fine . Today i log in and state of those nodes are power off when all vms are launched and works plus i cant set up another node [https://www.dropbox.com/s/il7866jdtlrhc7q/noconnection.PNG?dl=0](https://www.dropbox.com/s/il7866jdtlrhc7q/noconnection.PNG?dl=0) . Now i power cycle on each vm but still nodes aren’t ready and i cant create another node. ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 16, 2016, 2:05pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/37 "2016-09-16T14:05:07Z")
im start to think its better i like to install this cloud on vmware vsphere ---
**Author:** ![pracadyplomowa20](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@pracadyplomowa20](https://forums.suse.com/u/pracadyplomowa20)\ **Post date:** [September 16, 2016, 3:11pm UTC](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628/38 "2016-09-16T15:11:37Z")
> [@pracadyplomowa20;34350](#): > > im start to think its better i like to install this cloud on vmware vsphere ok i fixed it i don’t know why tftp was disable .I just enable it vie yast2 [Previous page](https://forums.suse.com/t/installation-suse-cloud-6-problem/28628.md?page=1)