# Multiple Problems with SLES for Raspberry PI

**URL:** <https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959>\
**Category:** SLES for Raspberry Pi\
**Created:** [November 13, 2016, 2:55am UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959 "2016-11-13T02:55:22Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jfauato](https://avatars.discourse-cdn.com/v4/letter/j/9d8465/32.png) [@jfauato](https://forums.suse.com/u/jfauato)\
**Post date:** [November 13, 2016, 2:55am UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959/1 "2016-11-13T02:55:22Z")

</div>

1 - Logitech mouse/keyboard not detected. Must use wired USB mouse and keyboard.

2 - Reboot with wireless mouse and keyboard inserted causes boot to hang “scanning bus 0”. Disconnect mouse and keyboard and system boots.

3 - Firefox very unstable. Freezes at time and when it fails the system logs out and must log in again.

John

---

<div class="post-metadata">

**Author:** ![mryo20011024](https://avatars.discourse-cdn.com/v4/letter/m/8491ac/32.png) [@mryo20011024](https://forums.suse.com/u/mryo20011024)\
**Post date:** [November 14, 2016, 12:40am UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959/2 "2016-11-14T00:40:44Z")

</div>

I can’t use my Logitech wireless keyboard. This is related to the driver included in kernel.

---

<div class="post-metadata">

**Author:** ![hdtodd](https://avatars.discourse-cdn.com/v4/letter/h/9d8465/32.png) [@hdtodd](https://forums.suse.com/u/hdtodd)\
**Post date:** [December 4, 2016, 2:57pm UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959/3 "2016-12-04T14:57:18Z")

</div>

Yes, I was surprised to find that my Logitech K400 keyboard/touchpad were not recognized by SLES on my Pi-3:  
both Raspbian and Fedora 24 recognized it immediately on my Pi-3. I had to go dig up a USB kbd & mouse to even get  
started on SLES.

I did find a couple of systems that are supposed to provide that service under SLES, but I haven’t been able  
to get them to work, and I’m a little wary of anything that has to be installed in addition to the basic kernel …  
seems like it might be vulnerable to future kernel updates disabling it.

This seems to be a kernel feature available on other Linux distributions, including on the Raspberry Pi, but not  
included in SLES. Any chance of including it in future updates?

---

<div class="post-metadata">

**Author:** ![mryo20011024](https://avatars.discourse-cdn.com/v4/letter/m/8491ac/32.png) [@mryo20011024](https://forums.suse.com/u/mryo20011024)\
**Post date:** [December 5, 2016, 4:11pm UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959/4 "2016-12-05T16:11:50Z")

</div>

Today I changed my wireless keyboard from Logicool K270 to Logitech MK270. This keyboard works fine on SLES 12SP2 for Raspberry Pi. But currently I didn’t check the difference of driver between K270 and MK270.

---

<div class="post-metadata">

**Author:** ![hdtodd](https://avatars.discourse-cdn.com/v4/letter/h/9d8465/32.png) [@hdtodd](https://forums.suse.com/u/hdtodd)\
**Post date:** [January 1, 2017, 3:04pm UTC](https://forums.suse.com/t/multiple-problems-with-sles-for-raspberry-pi/28959/5 "2017-01-01T15:04:42Z")

</div>

[QUOTE=jfauato;35251]1 - Logitech mouse/keyboard not detected. Must use wired USB mouse and keyboard.

John[/QUOTE]

I started a separate thread for this one and got a solution in response. My K400 Plus now functions as it should.  
Check that thread for the solution.

David
