# network

**URL:** <https://forums.suse.com/t/network/23907>\
**Category:** SLES Configure-Administer\
**Created:** [April 29, 2013, 2:57am UTC](https://forums.suse.com/t/network/23907 "2013-04-29T02:57:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![viewer1111](https://avatars.discourse-cdn.com/v4/letter/v/3da27b/32.png) [@viewer1111](https://forums.suse.com/u/viewer1111)\
**Post date:** [April 29, 2013, 2:57am UTC](https://forums.suse.com/t/network/23907/1 "2013-04-29T02:57:52Z")

</div>

i installaed 32 bit at my home desktop with oracle11 for training…  
i configured it as backside and database server when i installed…  
normally there was no poblem…  
i can acces normally and run oracle…

but i begin to use a new notebook…win7 pro.  
when i opened desktop an begun to run suse…  
it resetted my dsl modem…

is someone know why? why it begin to work as dns server?

best regards…

---

<div class="post-metadata">

**Author:** ![ab1](https://avatars.discourse-cdn.com/v4/letter/a/d2c977/32.png) [@ab1](https://forums.suse.com/u/ab1)\
**Post date:** [April 29, 2013, 3:41am UTC](https://forums.suse.com/t/network/23907/2 "2013-04-29T03:41:18Z")

</div>

Um… I’m not sure you’re in the right forum. Is there something  
causing you to think that SLES caused your DSL modem to reset in  
correctly? If so, this probably belongs in either the hardware or the  
networking subforum, and even then, you should provide a lot of  
information from the system itself on what happened, from things like the  
`dmesg` command, /var/log/messages, etc.

Good luck.

---

<div class="post-metadata">

**Author:** ![viewer1111](https://avatars.discourse-cdn.com/v4/letter/v/3da27b/32.png) [@viewer1111](https://forums.suse.com/u/viewer1111)\
**Post date:** [April 29, 2013, 9:40am UTC](https://forums.suse.com/t/network/23907/3 "2013-04-29T09:40:44Z")

</div>

thanx a lot …i will tray network forum…
