# NetworkManager and dial-up connection settings

**URL:** <https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666>\
**Category:** SLED Configure-Administer\
**Created:** [October 12, 2011, 8:36am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666 "2011-10-12T08:36:02Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![System1](https://avatars.discourse-cdn.com/v4/letter/s/51bf81/32.png) [@System1](https://forums.suse.com/u/System1)\
**Post date:** [October 12, 2011, 8:36am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/1 "2011-10-12T08:36:02Z")

</div>

Hello!  
I was create dial-up connection in nm-applet and it work fine on one  
phone line but don’t work on another. I found out that because of the  
different types of dialing in different PBX. My dial-up connection  
worked on tone dial enabled PBX and not work on pulse dial PBX. In Gnome  
NetworkManager applet I could not find dial type settings. How I can  
setup dial type for dial-up connection in NetworkManager?

## – svalx

svalx’s Profile: [http://forums.novell.com/member.php?userid=92998](http://forums.novell.com/member.php?userid=92998)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 12, 2011, 11:06am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/2 "2011-10-12T11:06:02Z")

</div>

Try to uncheck “Wait for dial tone” box. It used to work but I’m not  
able to check it at the moment because there are no pulse lines nearby.

## – AlexDudko

AlexDudko’s Profile: [http://forums.novell.com/member.php?userid=100476](http://forums.novell.com/member.php?userid=100476)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 13, 2011, 8:46pm UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/3 "2011-10-13T20:46:02Z")

</div>

No, this did not help me…

## – svalx

svalx’s Profile: [http://forums.novell.com/member.php?userid=92998](http://forums.novell.com/member.php?userid=92998)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 13, 2011, 10:36pm UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/4 "2011-10-13T22:36:01Z")

</div>

I don’t have a copy of SLED to hand right now (and I don’t have a modem)  
but a quick Google search indicates there is pulse/tone option in the  
YaST modem configuration module. So have a look at that.

Where are you located? I’m surprised to hear of someone trying to use  
dial up in 2011 and that you’re trying to do it somewhere you can’t use  
tone dialling honestly seems quite bizarre to me. Tone dialling has been  
around for decades.

## – mikewillis

mikewillis’s Profile: [http://forums.novell.com/member.php?userid=7510](http://forums.novell.com/member.php?userid=7510)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 14, 2011, 12:26am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/5 "2011-10-14T00:26:01Z")

</div>

I am from a Russia and some of local PBX still support only pulse  
dialing. YaST’s modem settings not affect to my connections because i  
use NetworkManager instead of YaST network configuration method. But i  
was configure it anyway - unsuccessfully. I use built-in HP notebook  
analog modem for connect to my office when Internet is lost. It work  
perfect for SSH (if i am located on tone line :))

## – svalx

svalx’s Profile: [http://forums.novell.com/member.php?userid=92998](http://forums.novell.com/member.php?userid=92998)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 14, 2011, 12:52am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/6 "2011-10-14T00:52:59Z")

</div>

On Thu, 13 Oct 2011 21:26:01 GMT  
svalx [svalx@no-mx.forums.novell.com](mailto:svalx@no-mx.forums.novell.com) wrote:  
[color=blue]

> I am from a Russia and some of local PBX still support only pulse  
> dialing. YaST’s modem settings not affect to my connections because i  
> use NetworkManager instead of YaST network configuration method. But i  
> was configure it anyway - unsuccessfully. I use built-in HP notebook  
> analog modem for connect to my office when Internet is lost. It work  
> perfect for SSH (if i am located on tone line :))
> 
> [/color]  
> Hi  
> Install mincom and the check via ‘at’ commands the factory  
> configuration, then change it to use pulse rather than tone.

–  
Cheers Malcolm Â°Â¿Â° (Linux Counter #276890)  
openSUSE 11.4 (x86\_64) Kernel 2.6.37.6-0.7-desktop  
up 3 days 20:52, 4 users, load average: 0.27, 0.35, 0.51  
GPU GeForce 8600 GTS Silent - Driver Version: 285.05.09

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 17, 2011, 4:01pm UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/7 "2011-10-17T16:01:31Z")

</div>

I was found a solution. Just enough to add the prefix “P” to the phone  
number field. Thank you all!

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 18, 2011, 10:36am UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/8 "2011-10-18T10:36:01Z")

</div>

svalx;2146150 Wrote:[color=blue]

> I am from a Russia[/color]  
> If I were you I would reply I am from Stalingrad!  
> My question is:  
> svalx;2146150 Wrote:[color=blue]  
> I use built-in HP notebook analog modem for connect to my office when  
> Internet is lost.[/color]  
> Do you connect to the Internet via office server?  
> If yes, could you tell, please, how do you do this?

## – LLiner

LLiner’s Profile: [http://forums.novell.com/member.php?userid=105778](http://forums.novell.com/member.php?userid=105778)  
View this thread: [http://forums.novell.com/showthread.php?t=446502](http://forums.novell.com/showthread.php?t=446502)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [October 18, 2011, 12:09pm UTC](https://forums.suse.com/t/networkmanager-and-dial-up-connection-settings/21666/9 "2011-10-18T12:09:47Z")

</div>

18.10.2011 11:36, LLiner wrote:[color=blue]

> Do you connect to the Internet via office server?  
> If yes, could you tell, please, how do you do this?
> 
> [/color]  
> No, I connect to office for remote administer my servers. But reserve  
> Internet connection from office server is good idea, I will try receive  
> this functional.
