# "\*\*\* no repository found" during installation

**URL:** <https://forums.suse.com/t/no-repository-found-during-installation/28298>\
**Category:** SLES for System Z\
**Created:** [June 17, 2016, 5:13pm UTC](https://forums.suse.com/t/no-repository-found-during-installation/28298 "2016-06-17T17:13:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jreginato](https://avatars.discourse-cdn.com/v4/letter/j/258eb7/32.png) [@jreginato](https://forums.suse.com/u/jreginato)\
**Post date:** [June 17, 2016, 5:13pm UTC](https://forums.suse.com/t/no-repository-found-during-installation/28298/1 "2016-06-17T17:13:53Z")

</div>

I’m trying to install SLES in a LPAR but cannot pass the right directories tree from DVD nor Hard Disk. Can someone send tips on how to?

---

<div class="post-metadata">

**Author:** ![ab1](https://avatars.discourse-cdn.com/v4/letter/a/d2c977/32.png) [@ab1](https://forums.suse.com/u/ab1)\
**Post date:** [June 17, 2016, 8:24pm UTC](https://forums.suse.com/t/no-repository-found-during-installation/28298/2 "2016-06-17T20:24:42Z")

</div>

Just for my own curiosity:

Which SLES version/SP/etc.?

Have you done this before, or is this the first attempt?

Are you following any documentation in particular? For example, are you  
going through  
[https://www.suse.com/documentation/sles-12/book\_sle\_deployment/data/sec\_zseries\_prep.html](https://www.suse.com/documentation/sles-12/book_sle_deployment/data/sec_zseries_prep.html)  
or one of the other pages linked-to from there?

–  
Good luck.

If you find this post helpful and are logged into the web interface,  
show your appreciation and click on the star below…