# Pdf formula mixed up

**URL:** <https://forums.suse.com/t/pdf-formula-mixed-up/27594>\
**Category:** SLES Configure-Administer\
**Created:** [November 4, 2015, 4:07pm UTC](https://forums.suse.com/t/pdf-formula-mixed-up/27594 "2015-11-04T16:07:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PWTEng](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@PWTEng](https://forums.suse.com/u/PWTEng)\
**Post date:** [November 4, 2015, 4:07pm UTC](https://forums.suse.com/t/pdf-formula-mixed-up/27594/1 "2015-11-04T16:07:13Z")

</div>

Hello,

I’m new to SLES forum so I hope I could give enough info to get help. 🙂  
If I open a pdf file using Evince 2.28.2 I can’t see a proper visualization of some math formula, as per attached screenshot.

[https://www.dropbox.com/s/yby9am8wpiftyq0/Screenshot.png?dl=0](https://www.dropbox.com/s/yby9am8wpiftyq0/Screenshot.png?dl=0)

I have poppler 0.12.3-1-.10.1-x86\_64 installed, which comes with std Suse distro, and I think the problem is related to poppler and to the reader, because I get the same result if I try using okular or acroread.

Any idea how to solve this?

Best regards,

Andrea

---

<div class="post-metadata">

**Author:** ![PWTEng](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@PWTEng](https://forums.suse.com/u/PWTEng)\
**Post date:** [November 5, 2015, 4:39pm UTC](https://forums.suse.com/t/pdf-formula-mixed-up/27594/2 "2015-11-05T16:39:36Z")

</div>

It turned out to be a file problem, everything works after re-generating the file.  
This thread can be closed.

Best,

Andrea

---

<div class="post-metadata">

**Author:** ![Jens-U](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jens-U](https://forums.suse.com/u/Jens-U)\
**Post date:** [November 12, 2015, 6:26pm UTC](https://forums.suse.com/t/pdf-formula-mixed-up/27594/3 "2015-11-12T18:26:30Z")

</div>

Hi Andrea,

> It turned out to be a file problem, everything works after re-generating the file.

thanks for reporting back!

> This thread can be closed.

While this forum doesn’t provide an according feature, consider it closed 😉

Regards,  
Jens