# Private message from Jens-U

**URL:** <https://forums.suse.com/t/private-message-from-jens-u/35732>\
**Category:** General\
**Created:** [April 16, 2013, 11:36am UTC](https://forums.suse.com/t/private-message-from-jens-u/35732 "2013-04-16T11:36:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jens-U](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jens-U](https://forums.suse.com/u/Jens-U)\
**Post date:** [April 16, 2013, 11:36am UTC](https://forums.suse.com/t/private-message-from-jens-u/35732/1 "2013-04-16T11:36:07Z")

</div>

Hi Stefano,

as this is usually plain simple - if your server (SLES/ntp) is actually operational and reachable by the switch, then you only need a few simple commands on the switch. May I take for granted that you have configured not only the sntp parameters (sntp server, sntp unicast), but told the switch to actually SNTP (timesync sntp)?

I don’t want to take this discussion offline - I just don’t want look “offensive” in the forum by asking such a plain question, especially as you are already in contact with HP support…

Regards,  
Jens