# Restoring striped LVM array after OS failure

**URL:** <https://forums.suse.com/t/restoring-striped-lvm-array-after-os-failure/25514>\
**Category:** SLED Install-Boot\
**Created:** [May 2, 2014, 7:51pm UTC](https://forums.suse.com/t/restoring-striped-lvm-array-after-os-failure/25514 "2014-05-02T19:51:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ElQueue](https://avatars.discourse-cdn.com/v4/letter/e/ac91a4/32.png) [@ElQueue](https://forums.suse.com/u/ElQueue)\
**Post date:** [May 2, 2014, 7:51pm UTC](https://forums.suse.com/t/restoring-striped-lvm-array-after-os-failure/25514/1 "2014-05-02T19:51:59Z")

</div>

So here’s my issue:

I installed 5 SATA hard discs  
I partitioned sda for my root, var, home, etc  
I used LVM2 to create a striped array using sdb, sdc, sdd, and sde

In the case of an OS failure where I have to reinstall suse, how would I reinstate the array? Everything I’ve read says once you run the pvcreate command data is lost on that drive.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [May 8, 2014, 3:30pm UTC](https://forums.suse.com/t/restoring-striped-lvm-array-after-os-failure/25514/2 "2014-05-08T15:30:17Z")

</div>

ElQueue,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

Has your issue been resolved? If not, you might try one of the following options:

- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all  
the other support options available.
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)

If this is a reply to a duplicate posting, please ignore and accept our apologies  
and rest assured we will issue a stern reprimand to our posting bot.

Good luck!

Your SUSE Forums Team  
[http://forums.suse.com](http://forums.suse.com)

---

<div class="post-metadata">

**Author:** ![Jens-U](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jens-U](https://forums.suse.com/u/Jens-U)\
**Post date:** [May 8, 2014, 5:52pm UTC](https://forums.suse.com/t/restoring-striped-lvm-array-after-os-failure/25514/3 "2014-05-08T17:52:26Z")

</div>

Hi ElQueue,

[QUOTE=ElQueue;21075]So here’s my issue:

I installed 5 SATA hard discs  
I partitioned sda for my root, var, home, etc  
I used LVM2 to create a striped array using sdb, sdc, sdd, and sde

In the case of an OS failure where I have to reinstall suse, how would I reinstate the array? Everything I’ve read says once you run the pvcreate command data is lost on that drive.[/QUOTE]

If you only want to re-install the OS (no drives were failing), LVM then will detect the PVs (by markers created on the disks) and rebuild the stripe set.

Regards,  
Jens
