# RKE deployment including rancher server

**URL:** <https://forums.suse.com/t/rke-deployment-including-rancher-server/13936>\
**Category:** General\
**Created:** [April 12, 2019, 12:04pm UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936 "2019-04-12T12:04:30Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alfie](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/alfie/32/5058_2.png) [@Alfie](https://forums.suse.com/u/Alfie)\
**Post date:** [April 12, 2019, 12:04pm UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936/1 "2019-04-12T12:04:30Z")

</div>

Hi all. I was able to deploy a k8s with 1 master 2 etcd and 2 workers with RKE…  
I wonder if it’s possible to install kubernetes dashboard too with RKE and even rancher server itself with the same deployment  
Cheers

---

<div class="post-metadata">

**Author:** ![vincent](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/vincent/32/7156_2.png) [@vincent](https://forums.suse.com/u/vincent)\
**Post date:** [April 12, 2019, 4:23pm UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936/2 "2019-04-12T16:23:07Z")

</div>

Sure, you can install rancher and/or dashboard in there.

2 is not a good number of etcd nodes. It needs a strict majority (more than half) of nodes available, so 2 gives you no extra failure tolerance but twice as much hardware that can fail. Use odd numbers, 1, 3, or 5 to survive 0, 1, or 2 failures.

---

<div class="post-metadata">

**Author:** ![Alfie](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/alfie/32/5058_2.png) [@Alfie](https://forums.suse.com/u/Alfie)\
**Post date:** [April 12, 2019, 5:00pm UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936/3 "2019-04-12T17:00:39Z")

</div>

Thanks Vincent. Sorry…I meant 2 etcd as server but the controlplane got the 3rd etcd running.

So How can I install thru RKE/config.yml the k8s dashboard?

Cheers

---

<div class="post-metadata">

**Author:** ![vincent](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/vincent/32/7156_2.png) [@vincent](https://forums.suse.com/u/vincent)\
**Post date:** [April 13, 2019, 12:38am UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936/4 "2019-04-13T00:38:35Z")

</div>

You don’t install it “through” RKE; once you run RKE you just have a cluster. And you can run whatever you want in that cluster, which in this case is the [Rancher](https://rancher.com/docs/rancher/v2.x/en/installation/ha/) or [dashboard](https://github.com/helm/charts/tree/master/stable/kubernetes-dashboard) helm chart.

---

<div class="post-metadata">

**Author:** ![Alfie](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/alfie/32/5058_2.png) [@Alfie](https://forums.suse.com/u/Alfie)\
**Post date:** [April 13, 2019, 4:33pm UTC](https://forums.suse.com/t/rke-deployment-including-rancher-server/13936/5 "2019-04-13T16:33:24Z")

</div>

Hi Vincent. Thanks for that. I thought it would be possible with RKE/cluster.yml… I am aware of helm so I might go ahead with it.

Cheers
