# SLEPOS and greentouch touchscreen **URL:** \ **Category:** SLES Point of Service\ **Created:** [August 20, 2017, 5:26am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197 "2017-08-20T05:26:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 20, 2017, 5:26am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/1 "2017-08-20T05:26:30Z")
Hi all: im having a nightmare time trying o install the dependencies for a touchscreen from greentouch on a sles 11 sp3 with slePOS its supposed to be this one: Model Number GT-TMO185A [http://www.greentouch.com.cn/products\_detail/&productId=288.html](http://www.greentouch.com.cn/products_detail/&productId=288.html) once i try to install the touchscreen.sh ask me for this : make tcl tk gcc glibc-dlevel XFree86-dlevel kernel-source the distro i had didint have any of those installed( its a super cut distro from a big enterprise) i installed all but the XFree86 , its nowhere to be found its not on the sles 11 sp3 dvd or SDK dvd. tried looking for the RPM alone but the RPM ask me for another dependencies and so and so, dependencies after dependencies , which i cannot find anywhere anyone can help me isntall this screen? i appreciate the help regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 20, 2017, 6:01pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/2 "2017-08-20T18:01:19Z")
Hi and welcome to the Forum 🙂 You want the Xorg (AKA XFree86) development rpm(s) which should be on the SDK. Which driver did you download? ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 21, 2017, 8:16pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/3 "2017-08-21T20:16:47Z")
Hi i got the drivers from the manufacturer: [http://www.greentouch.com.cn/products\_detail/&productId=158.html](http://www.greentouch.com.cn/products_detail/&productId=158.html) 4 wire Resistive touch screen Windows 2000,Windows XP,Win 8,Windows NT,Windows CE,Linux,Mac\> And i tried to install the xfree86 but i cant find it on any repo or SDK DVD. thats where im stuck. regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 21, 2017, 11:54pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/4 "2017-08-21T23:54:47Z")
Hi OK, so it’s an egalax device, your connecting via USB? If so can you post the output from the following command; ```auto lsusb ``` On your system if you use the following command do you see xorg devel packages? ```auto zypper se xorg x11 ``` Now if you look down in /tmp/touchkit there are already precompiled libraries for the device etc… so you could try manually copying to the correct location. Is this a 32 or 64bit install? A number of years ago I had a similar setup, need to get the screen out from the parts bin… ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 22, 2017, 3:33am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/5 "2017-08-22T03:33:36Z")
Hi here is the output Bus 004 Device 002: ID 8087:8000 Intel Corp. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 8087:8008 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 046d:c063 Logitech, Inc. DELL Laser Mouse Bus 001 Device 002: ID 0c45:8419 Microdia Bus 001 Device 005: ID 413c:2110 Dell Computer Corp. Bus 001 Device 004: ID 413c:1010 Dell Computer Corp. Bus 001 Device 006: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and S | Name | Summary | Type –±--------------------------±---------------------------------------------------------±---------- i | dbus-1-x11 | D-Bus Message Bus System | package | dbus-1-x11 | D-Bus Message Bus System | srcpackage | emacs-x11 | GNU Emacs: Emacs binary with X Window System Support | package i | ghostscript-x11 | X11 library for Ghostscript | package i | libQt5X11Extras5 | Qt 5 X11 Extras Addon | package | libX11 | Core X11 protocol client library | srcpackage i | libX11-6 | Core X11 protocol client library | package i | libX11-6-32bit | Core X11 protocol client library | package i | libX11-data | Shared data for the Core X11 protocol library | package i | libX11-xcb1 | XCB X11 protocol client library | package i | libX11-xcb1-32bit | XCB X11 protocol client library | package | libgtkglext-x11-1\_0-0 | OpenGL Extension to GTK | package i | libqt4-x11 | Qt 4 GUI related libraries | package i | libqt4-x11-32bit | Qt 4 GUI related libraries | package | libqt5-qtx11extras | Qt 5 X11 Extras Addon | srcpackage | libva-x11-1 | Video Acceleration (VA) API for Linux – VA/X11 Backend | package i | libxkbcommon-x11-0 | Library for handling xkb descriptions using XKB-X11 | package | libxkbcommon-x11-0-32bit | Library for handling xkb descriptions using XKB-X11 | package i | patterns-sles-x11 | X Window System | package i | patterns-sles-x11-32bit | X Window System | package i | perl-X11-Protocol | Perl module for the X Window System Protocol, version 11 | package | perl-X11-Protocol | Perl module for the X Window System Protocol, version 11 | srcpackage i | pulseaudio-module-x11 | X11 module for PulseAudio | package | qt4-x11-tools | C++ Program Library, Core Components | package i | x11 | X Window System | pattern | x11-japanese-bitmap-fonts | Japanese Fixed Fonts for the X Window System | package | x11-japanese-bitmap-fonts | Japanese Fixed Fonts for the X Window System | srcpackage i | x11-tools | Tools for the X Window System | package | x11-tools | Tools for the X Window System | srcpackage i | x11perf | Utility to test X11 server performance | package | x11perf | Utility to test X11 server performance | srcpackage | xorg-docs | Miscellaneous documentation for the X Window System | package | xorg-docs | Miscellaneous documentation for the X Window System | srcpackage i | xorg-x11 | Compatibility metapackage for [X.Org](http://X.Org) sample applications | package | xorg-x11 | Compatibility metapackage for [X.Org](http://X.Org) sample applications | srcpackage i | xorg-x11-Xvnc | TigerVNC implementation of Xvnc | package | xorg-x11-driver-input | Compatibility metapackage for [X.Org](http://X.Org) input drivers | package | xorg-x11-driver-input | Compatibility metapackage for [X.Org](http://X.Org) input drivers | srcpackage i | xorg-x11-driver-video | Compatibility metapackage for [X.Org](http://X.Org) video drivers | package | xorg-x11-driver-video | Compatibility metapackage for [X.Org](http://X.Org) video drivers | srcpackage i | xorg-x11-essentials | Compatibility metapackage for [X.Org](http://X.Org) core applications | package i | xorg-x11-fonts | [X.Org](http://X.Org) fonts | package | xorg-x11-fonts | [X.Org](http://X.Org) fonts | srcpackage i | xorg-x11-fonts-core | Core Fonts for [X.Org](http://X.Org) | package i | xorg-x11-libs | Compatibility metapackage for [X.Org](http://X.Org) libraries | package | xorg-x11-libs | Compatibility metapackage for [X.Org](http://X.Org) libraries | srcpackage i | xorg-x11-server | X | package | xorg-x11-server | X | srcpackage i | xorg-x11-server-extra | Additional Xservers (Xdmx, Xephyr, Xnest) | package i | yast2-x11 | YaST2 - X11 support | package | yast2-x11 | YaST2 - X11 support | srcpackage Right now i have installed suse12 , ifyou really need the output from suse 11 let me know. also i installed ubuntu gnome and the touchscreen worked right away. nothing done on my side to make it work and i thought that maybe suse 12 now that it switched to gnome, would work too, but it didnt. also the drivers from the manufacturer are quite old, for suse 9, so no drivers . i dont think they will work ( also the installation script have errors) regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 22, 2017, 3:57am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/6 "2017-08-22T03:57:25Z")
Hi What release of SLE is now installed… ```auto cat /etc/SuSE-release ``` What release are you wanting it to work on? There is a difference in Xorg file locations etc. What version of Ub\* (esp versions of Xorg and kernel) can make a big difference, what about the lsusb output to identify the device from Ubuntu? Also on Ub\* is it using usbtouchscreen kernel module; ```auto lsmod |grep usb ``` ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 22, 2017, 6:26pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/7 "2017-08-22T18:26:57Z")
Hi The lsusb from Ubuntu its the same i sent you from SLES , the only device listed that i think its the mouse of the touchscreen its the Bus 003 Device 002 ID 0c45:8419 Midrodia im using the Ubuntu Gnome . 16.04.3 The client wants to use SLES 11 SP3 , but i cannot install that anymore , there are no isos to download from the official page. only SP4 what would i need to do to make the touchscreen work? and by working i mean the mouse ( or tracking?!) to be able to click on the screen i just need a single click, no right button , nothing. just click . how can i get the working config from ubuntu and use it on SLES? regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 22, 2017, 8:56pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/8 "2017-08-22T20:56:53Z")
[QUOTE=Moratorro;39220]Hi The lsusb from Ubuntu its the same i sent you from SLES , the only device listed that i think its the mouse of the touchscreen its the Bus 003 Device 002 ID 0c45:8419 Midrodia im using the Ubuntu Gnome . 16.04.3 The client wants to use SLES 11 SP3 , but i cannot install that anymore , there are no isos to download from the official page. only SP4 what would i need to do to make the touchscreen work? and by working i mean the mouse ( or tracking?!) to be able to click on the screen i just need a single click, no right button , nothing. just click . how can i get the working config from ubuntu and use it on SLES? regards[/QUOTE] Hi OK this looks like an infrared USB device; [https://bugs.launchpad.net/ubuntu/+source/evtest/+bug/1519393](https://bugs.launchpad.net/ubuntu/+source/evtest/+bug/1519393) When you test on Ub\* can you post the output from that device with; ```auto lsusb -vvvv -c -d 0c45:8419 ``` Now, SLES 11 SP3 downloads are available, you want DVD1 (Not DVD2) but the later release you can use the better due to better driver support etc. [https://www.suse.com/download-linux/source-code/](https://www.suse.com/download-linux/source-code/) So, PLEASE confirm both the release and arch (32 or 64bit) your going to use for this project so if needed I can install a test setup to duplicate what to install and where. There are also some tools in the SLE 11 branch called sax2 to help set up things as well for screens etc. ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 22, 2017, 10:31pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/9 "2017-08-22T22:31:10Z")
Hi thanks for the bug link, will check it now. the output in ubuntu: Bus 003 Device 003: ID 0c45:8419 Microdia Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x8419 bcdDevice 1.00 iManufacturer 1 SONiX iProduct 2 USB Device iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 199 Report Descriptors: \*\* UNAVAILABLE \*\* Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 5 Device Status: 0x0000 (Bus Powered) The -c option didnt work. The client have suse 11 sp3 32bit and how can i use sas2x ? i hace checked some manuals but nothing about the touchscreen regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 22, 2017, 10:59pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/10 "2017-08-22T22:59:23Z")
> [@](#): > > On Tue 22 Aug 2017 07:34:01 PM CDT, Moratorro wrote: > > Hi > > thanks for the bug link, will check it now. > > the output in ubuntu: > > Bus 003 Device 003: ID 0c45:8419 Microdia > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0c45 Microdia > idProduct 0x8419 > bcdDevice 1.00 > iManufacturer 1 SONiX > iProduct 2 USB Device > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 1 Boot Interface Subclass > bInterfaceProtocol 2 Mouse > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.00 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 199 > Report Descriptors: > \*\* UNAVAILABLE \*\* > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 5 > Device Status: 0x0000 > (Bus Powered) > > The -c option didnt work. > > The client have suse 11 sp3 32bit > > and how can i use sas2x ? i hace checked some manuals but nothing about > the touchscreen > > regards Hi Open a terminal and switch to root user and run the command; ```auto sax2 ``` That should give you a GUI to configure screen, mouse. X configuration etc. It’s a mouse emulation via infrared LED’s by the looks. I’m guessing on the screen front there is a gap in the plastic and not touching the screen, or small holes present? – Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) openSUSE Leap 42.2|GNOME 3.20.2|4.4.79-18.26-default If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below… Thanks! ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 22, 2017, 11:30pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/11 "2017-08-22T23:30:18Z")
Hi yup i checked and there is a reddish hue in four inner edges. will check the sax2 regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 22, 2017, 11:50pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/12 "2017-08-22T23:50:16Z")
[QUOTE=Moratorro;39227]Hi yup i checked and there is a reddish hue in four inner edges. will check the sax2 regards[/QUOTE] Hi OK, so you need to confirm the real model as it appears to be infrared… [http://www.greentouch.com.cn/products\_detail/&productId=127.html](http://www.greentouch.com.cn/products_detail/&productId=127.html) ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 23, 2017, 1:54am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/13 "2017-08-23T01:54:33Z")
Hi on the back of the touchscreen say its s GT-TM185 and there are no more drivers, there is only one available on the touchscreen page regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 23, 2017, 3:14am UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/14 "2017-08-23T03:14:23Z")
> [@](#): > > On Tue 22 Aug 2017 11:04:02 PM CDT, Moratorro wrote: > > Hi > > on the back of the touchscreen say its s GT-TM185 > and there are no more drivers, there is only one available on the > touchscreen page > > regards Hi OK, so can you install irda and yast2-irda packages, also want you to try adding a kernel module via; ```auto modprobe irda-usb ``` Then look at the yast2 irda configuration and sax2 tools. – Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) openSUSE Leap 42.2|GNOME 3.20.2|4.4.79-18.26-default If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below… Thanks! ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 23, 2017, 4:30pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/15 "2017-08-23T16:30:46Z")
Hi Thanks for the reply and i will install those packages. but im having a hard tie to install sles11 sp3 it hangs on “initialazing gfx code” i checked the md5 hash nad its correct. changed the HDD AHCI to IDE using onboard video. this is the only version that gives me this error. regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 23, 2017, 4:45pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/16 "2017-08-23T16:45:13Z")
> [@](#): > > On Wed 23 Aug 2017 01:34:02 PM CDT, Moratorro wrote: > > Hi > > Thanks for the reply and i will install those packages. > but im having a hard tie to install sles11 sp3 > > it hangs on “initialazing gfx code” > > i checked the md5 hash nad its correct. > changed the HDD AHCI to IDE > using onboard video. > > this is the only version that gives me this error. > > regards Hi Stick with AHCI, is there an option in the BIOS to set the video ram size, gfx is the graphics card… So try selecting the text install option. – Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) openSUSE Leap 42.2|GNOME 3.20.2|4.4.79-18.26-default If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below… Thanks! ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 23, 2017, 5:36pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/17 "2017-08-23T17:36:10Z")
Hi I cant select any options, there is nothing else, only the line “initiilazing gfx code”. it get stuckk there for hours if i let it. so i cannot isntall sles 11 sp3 at the moment. the MB its a MSI H81M E33 can you help me fix the screen on sles 12? to move things forward regards and thanks!! ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 23, 2017, 5:57pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/18 "2017-08-23T17:57:56Z")
[QUOTE=Moratorro;39245]Hi I cant select any options, there is nothing else, only the line “initiilazing gfx code”. it get stuckk there for hours if i let it. so i cannot isntall sles 11 sp3 at the moment. the MB its a MSI H81M E33 can you help me fix the screen on sles 12? to move things forward regards and thanks!![/QUOTE] Hi Sure, this is SLES 12 SP2 then? ---
**Author:** ![Moratorro](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Moratorro](https://forums.suse.com/u/Moratorro)\ **Post date:** [August 23, 2017, 6:02pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/19 "2017-08-23T18:02:47Z")
Hi For now, till i can isntall sles 11 sp3 and try the options you sent me. so my request will be, can you help me with sles 12 sp2 for the moment please? i really appreciate your help regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [August 23, 2017, 6:20pm UTC](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197/20 "2017-08-23T18:20:09Z")
[QUOTE=Moratorro;39247]Hi For now, till i can isntall sles 11 sp3 and try the options you sent me. so my request will be, can you help me with sles 12 sp2 for the moment please? i really appreciate your help regards[/QUOTE] Hi Well the irda tools are lacking in SLES 12 SP2, however can you check on Ub\* and see if the irda module is loaded AFTER you plug in the usb cord from the screen… Run this command before and after. ```auto lsmod |grep irda ``` If the module is loaded, then need to check the same on SLES 12 SP2. On Ub\* also need to look at the dmesg output AFTER you plug in the device as well to see what is being loaded/detected etc [Next page](https://forums.suse.com/t/slepos-and-greentouch-touchscreen/30197.md?page=2)