# SLES 12 SP1 do not boot

**URL:** <https://forums.suse.com/t/sles-12-sp1-do-not-boot/30147>\
**Category:** SLES Install-Boot\
**Created:** [August 8, 2017, 3:47pm UTC](https://forums.suse.com/t/sles-12-sp1-do-not-boot/30147 "2017-08-08T15:47:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![thepailo](https://avatars.discourse-cdn.com/v4/letter/t/aca169/32.png) [@thepailo](https://forums.suse.com/u/thepailo)\
**Post date:** [August 8, 2017, 3:47pm UTC](https://forums.suse.com/t/sles-12-sp1-do-not-boot/30147/1 "2017-08-08T15:47:52Z")

</div>

Hi to everybody,

I have a problem with a machin that do not start, is stucked in "A start job is running for sapconf (time/no limits)

![](https://image.ibb.co/g8bkWa/SLES12.jpg)

---

<div class="post-metadata">

**Author:** ![Eugen](https://avatars.discourse-cdn.com/v4/letter/e/ebca7d/32.png) [@Eugen](https://forums.suse.com/u/Eugen)\
**Post date:** [August 8, 2017, 4:39pm UTC](https://forums.suse.com/t/sles-12-sp1-do-not-boot/30147/2 "2017-08-08T16:39:02Z")

</div>

Hi,

I’m not sure what other services are required to get the system started, but you could try to disable sapconf in rescue mode and take a look what’s going on in syslog or check the configuration of sapconf.

Regards,  
Eugen

---

<div class="post-metadata">

**Author:** ![thepailo](https://avatars.discourse-cdn.com/v4/letter/t/aca169/32.png) [@thepailo](https://forums.suse.com/u/thepailo)\
**Post date:** [August 8, 2017, 6:26pm UTC](https://forums.suse.com/t/sles-12-sp1-do-not-boot/30147/3 "2017-08-08T18:26:15Z")

</div>

The machine didn’t go ahead and i was unable to enter in recover mode, I started the machine with an old snapper and reboot with that and now is working good, i have fixed the issue.

I think i have solved by my-self.

Thank you 😉