# SLES 12 xrdpVNC problems **URL:** \ **Category:** SLES Configure-Administer\ **Created:** [March 2, 2015, 9:23am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748 "2015-03-02T09:23:20Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![christianmolecki](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@christianmolecki](https://forums.suse.com/u/christianmolecki)\ **Post date:** [March 2, 2015, 9:23am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/1 "2015-03-02T09:23:20Z")
Hello, I using VNC to connect to our SLES servers remotely. At SLES12 I have some GUI problems: 1st gedit: I can’t open gedit. I get following error: QUOTE: Gdk-ERROR \*\*: The program ‘gedit’ received an X Window System error. This propably reflectes bug in the program. The error ‘BadImplementation (server does not implement operation)’. (Details: serial 604 error\_code 17 reques\_code 132 (XInputExtension) minor code 46) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with GDK\_SYNCHRONIZE environment variable to change this behavior. You can geht a meaningful backtrace from your debugger if you break on the gdk\_x\_error() funktion.)[/QUOTE] 2nd terminal: If I try to open the menu (File, Edit, View, Terminal, Help) the terminal crashes immediately. 3rd xrdp: If I log in via xrdp, the system language is english, instead of german (default). The language in the Region and Speech menu is german. The problems also occurs with xrdp and not with VMware console Best regards, Christian ---
**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\ **Post date:** [March 8, 2015, 2:30pm UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/2 "2015-03-08T14:30:15Z")
Christianmolecki, It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply. Has your issue been resolved? If not, you might try one of the following options: - Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all the other support options available. - You could also try posting your message again. Make sure it is posted in the correct newsgroup. ([http://forums.suse.com](http://forums.suse.com)) Be sure to read the forum FAQ about what to expect in the way of responses: [http://forums.suse.com/faq.php](http://forums.suse.com/faq.php) If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot. Good luck! Your SUSE Forums Team [http://forums.suse.com](http://forums.suse.com) ---
**Author:** ![sivakumarmalleswaran](https://avatars.discourse-cdn.com/v4/letter/s/8e8cbc/32.png) [@sivakumarmalleswaran](https://forums.suse.com/u/sivakumarmalleswaran)\ **Post date:** [March 16, 2015, 12:45pm UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/3 "2015-03-16T12:45:47Z")
[QUOTE=christianmolecki;26673]Hello, I using VNC to connect to our SLES servers remotely. At SLES12 I have some GUI problems: 1st gedit: I can’t open gedit. I get following error: 2nd terminal: If I try to open the menu (File, Edit, View, Terminal, Help) the terminal crashes immediately. 3rd xrdp: If I log in via xrdp, the system language is english, instead of german (default). The language in the Region and Speech menu is german. The problems also occurs with xrdp and not with VMware console Best regards, Christian[/QUOTE] I recently installed SLES12 and configured VNC. Seeing same issue. Any resolution? /var/log/message output: 2015-03-16T16:15:14.109122+05:30 linux-0qcg org.gnome.Terminal[10931]: (gnome-terminal-server:11244): Gdk-ERROR \*\*: The program ‘gnome-terminal-server’ received an X Window System error. 2015-03-16T16:15:14.109467+05:30 linux-0qcg org.gnome.Terminal[10931]: This probably reflects a bug in the program. 2015-03-16T16:15:14.109710+05:30 linux-0qcg org.gnome.Terminal[10931]: The error was ‘BadImplementation (server does not implement operation)’. 2015-03-16T16:15:14.109948+05:30 linux-0qcg org.gnome.Terminal[10931]: (Details: serial 444 error\_code 17 request\_code 132 (XInputExtension) minor\_code 46) 2015-03-16T16:15:14.110188+05:30 linux-0qcg org.gnome.Terminal[10931]: (Note to programmers: normally, X errors are reported asynchronously; 2015-03-16T16:15:14.110426+05:30 linux-0qcg org.gnome.Terminal[10931]: that is, you will receive the error a while after causing it. 2015-03-16T16:15:14.110664+05:30 linux-0qcg org.gnome.Terminal[10931]: To debug your program, run it with the GDK\_SYNCHRONIZE environment 2015-03-16T16:15:14.110953+05:30 linux-0qcg org.gnome.Terminal[10931]: variable to change this behavior. You can then get a meaningful 2015-03-16T16:15:14.111236+05:30 linux-0qcg org.gnome.Terminal[10931]: backtrace from your debugger if you break on the gdk\_x\_error() function.) 2015-03-16T16:15:14.112075+05:30 linux-0qcg kernel: [1331.342439] traps: gnome-terminal-[11244] trap int3 ip:7fae284d1139 sp:7fffbb39f9c0 error:0traps: ---
**Author:** ![christianmolecki](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@christianmolecki](https://forums.suse.com/u/christianmolecki)\ **Post date:** [March 20, 2015, 8:21am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/4 "2015-03-20T08:21:50Z")
Hi, using SLE Classic as windows manager is a workaround. You can change the window manager on the login screen, if you enter the password (the gear wheel) ---
**Author:** ![christianmolecki](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@christianmolecki](https://forums.suse.com/u/christianmolecki)\ **Post date:** [March 20, 2015, 8:33am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/5 "2015-03-20T08:33:45Z")
Edit (10 minutes expired): you have to use IceWM not Sle Classic. ---
**Author:** ![LocataCorp](https://avatars.discourse-cdn.com/v4/letter/l/dbc845/32.png) [@LocataCorp](https://forums.suse.com/u/LocataCorp)\ **Post date:** [May 1, 2015, 9:08am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/6 "2015-05-01T09:08:59Z")
Good afternoon, I have the same problem, did you find a resolution? David J. ---
**Author:** ![christianmolecki](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@christianmolecki](https://forums.suse.com/u/christianmolecki)\ **Post date:** [May 4, 2015, 8:53am UTC](https://forums.suse.com/t/sles-12-xrdpvnc-problems/26748/7 "2015-05-04T08:53:01Z")
Hello David, the problem still occurs. I don’t have a solution, just a workaround (see above). Christian M.