# SLES10 Xen Jumbo Frames

**URL:** <https://forums.suse.com/t/sles10-xen-jumbo-frames/22075>\
**Category:** SLES Virtualization\
**Created:** [December 8, 2011, 2:16am UTC](https://forums.suse.com/t/sles10-xen-jumbo-frames/22075 "2011-12-08T02:16:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![System1](https://avatars.discourse-cdn.com/v4/letter/s/51bf81/32.png) [@System1](https://forums.suse.com/u/System1)\
**Post date:** [December 8, 2011, 2:16am UTC](https://forums.suse.com/t/sles10-xen-jumbo-frames/22075/1 "2011-12-08T02:16:02Z")

</div>

Having a small issue getting Jumbo frames to work here in SLES10 with  
Xen and bridged networking. I set up the Ethernet interface and the  
Bridge for jumbo frames (MTU=‘9000’ in  
/etc/sysconfig/network-scripts/ifcfg-\*). I quickly figured out that the  
Linux bridge auto-negotiates to the lowest MTU set by one of its  
members. There doesn’t seem to be a built-in way to force the MTU, so I  
had to modify the /etc/xen/scripts/xen-network-common.sh script to grab  
the MTU from the /sys/class/net//mtu file and set it before  
adding a new interface to the bridge. This works wonderfully for PV VMs

- the vif. interfaces get set with the 9000 MTU setting. However,  
with HVM domUs this does not work, primarily because the HVM domUs seem  
to generate both a vif interface AND a tap interface. I have no clue  
why - the tap interface seems totally worthless. More to the point,  
though, there’s a limitation in the Linux kernel pre-2.6.24 that does  
not allow tap interfaces to have MTU over 1500. This has two negative  
consequences: 1) bridge MTU gets set to 1500, and 2) because bridge  
MTU=1500, future vif MTUs also get set to 1500, resulting in no  
communication on that bridge until I go manually run “ifconfig  
vif. mtu 9000” at which point they start working, again.

So, first, has anyone had any success getting SLES (10 or 11 - I’m  
happy to look at how 11 does it, too) set up with Xen AND Jumbo Frames?

Second, are there any negative consequences to not having the  
tap. interfaces get added to the bridges? A quick test removing  
it shows no bad side-effects. If there are, what are they? If not, how  
do I modify the xen network scripts to prevent the tap interfaces from  
getting added to bridges?

Thanks - Nick

## – nick\_at\_seakr

nick\_at\_seakr’s Profile: [http://forums.novell.com/member.php?userid=6863](http://forums.novell.com/member.php?userid=6863)  
View this thread: [http://forums.novell.com/showthread.php?t=449312](http://forums.novell.com/showthread.php?t=449312)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [December 13, 2011, 8:23pm UTC](https://forums.suse.com/t/sles10-xen-jumbo-frames/22075/2 "2011-12-13T20:23:16Z")

</div>

nick,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

Has your problem been resolved? If not, you might try one of the following options:

- Visit [http://support.novell.com](http://support.novell.com) and search the knowledgebase and/or check all  
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.novell.com](http://forums.novell.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.novell.com/faq.php](http://forums.novell.com/faq.php)

If this is a reply to a duplicate posting, please ignore and accept our apologies  
and rest assured we will issue a stern reprimand to our posting bot.

Good luck!

Your Novell Product Support Forums Team  
[http://forums.novell.com/](http://forums.novell.com/)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/suse/original/2X/5/5012ba89e3ffb5220dac47d5ea0ba032e2fe1cb6.png) [@system](https://forums.suse.com/u/system)\
**Post date:** [December 15, 2011, 2:16am UTC](https://forums.suse.com/t/sles10-xen-jumbo-frames/22075/3 "2011-12-15T02:16:01Z")

</div>

Hello. Same problem from here. I Can add the MTU 9000 on the Bridge, but  
they don t works on the PV (on my case with XEN)…Don t know how can i  
solve the MTU on the Xen server (SLES 11 SP1 with lastest patches)  
Regards  
Victor

## – Regards Victor Galino Lopez, Promo-Soft, S.L.

vgalino’s Profile: [http://forums.novell.com/member.php?userid=4109](http://forums.novell.com/member.php?userid=4109)  
View this thread: [http://forums.novell.com/showthread.php?t=449312](http://forums.novell.com/showthread.php?t=449312)
