# SLES12 SP2 doesn't start with XEN hypervisor **URL:** \ **Category:** SLES Virtualization\ **Created:** [October 3, 2017, 3:12pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401 "2017-10-03T15:12:46Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 3, 2017, 3:12pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/1 "2017-10-03T15:12:46Z")
I install SLES12SP2 and want to run as a XEN Host But SLES12SP2 doesn’t boot with XEN hypervisor only without I have Adaptec 8805 Raid Controller. If I change this Controller thru older one 6805 SLES12SP2 Server start normally with XEN or without no problem. Doesn’t anyone have idea what is here wrong Thanks for any help Amila 1: journalctl: – Logs begin at Mon 2017-10-02 14:00:24 CEST, end at Mon 2017-10-02 14:07:28 CEST. – Oct 02 14:00:24 bsxsxen3 systemd-journald[139]: Runtime journal (/run/log/journal/) is currently using 8.0M. Maximum allowed usage is set to 1.5G. Leaving at least 2.3G free (of currently available 15.3G of space). Enforced usage limit is thus 1.5G, of which 1.5G are still available. Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys cpuset Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys cpu Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys cpuacct Oct 02 14:00:24 bsxsxen3 kernel: Linux version 4.4.59-92.17-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Thu Apr 6 14:16:09 UTC 2017 (7bc489d) Oct 02 14:00:24 bsxsxen3 kernel: Command line: root=/dev/mapper/bsxsxen3–system-root video=800x600 resume=/dev/disk/by-uuid/76228c0d-4546-47e1-acfe-bf3271c431c2 splash=verbose quiet showopts udevchilds=128 Oct 02 14:00:24 bsxsxen3 kernel: tseg: 00d7f00000 Oct 02 14:00:24 bsxsxen3 kernel: x86/fpu: Legacy x87 FPU detected. Oct 02 14:00:24 bsxsxen3 kernel: x86/fpu: Using ‘lazy’ FPU context switches. Oct 02 14:00:24 bsxsxen3 kernel: Released 0 page(s) Oct 02 14:00:24 bsxsxen3 kernel: e820: BIOS-provided physical RAM map: Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x0000000000000000-0x0000000000095fff] usable Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x0000000000096c00-0x00000000000fffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x0000000000100000-0x00000000d7e7ffff] usable Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000d7e8e000-0x00000000d7e8ffff] type 9 Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000d7e90000-0x00000000d7eb3fff] ACPI data Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000d7eb4000-0x00000000d7edffff] ACPI NVS Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000d7ee0000-0x00000000d7ffffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x0000000100000000-0x0000000827ffffff] usable Oct 02 14:00:24 bsxsxen3 kernel: Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved Oct 02 14:00:24 bsxsxen3 kernel: NX (Execute Disable) protection: active Oct 02 14:00:24 bsxsxen3 kernel: SMBIOS 2.6 present. Oct 02 14:00:24 bsxsxen3 kernel: DMI: Supermicro H8DG6/H8DGi/H8DG6/H8DGi, BIOS 2.0 09/08/11 Oct 02 14:00:24 bsxsxen3 kernel: Hypervisor detected: Xen Oct 02 14:00:24 bsxsxen3 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==\> reserved Oct 02 14:00:24 bsxsxen3 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable Oct 02 14:00:24 bsxsxen3 kernel: AGP: No AGP bridge found Oct 02 14:00:24 bsxsxen3 kernel: e820: last\_pfn = 0x828000 max\_arch\_pfn = 0x400000000 Oct 02 14:00:24 bsxsxen3 kernel: MTRR: Disabled Oct 02 14:00:24 bsxsxen3 kernel: x86/PAT: MTRRs disabled, skipping PAT initialization too. Oct 02 14:00:24 bsxsxen3 kernel: x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC Oct 02 14:00:24 bsxsxen3 kernel: e820: last\_pfn = 0xd7e80 max\_arch\_pfn = 0x400000000 Oct 02 14:00:24 bsxsxen3 kernel: Scanning 1 areas for low memory corruption Oct 02 14:00:24 bsxsxen3 kernel: Base memory trampoline at [ffff880000090000] 90000 size 24576 Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d2000, 0x021d2fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d3000, 0x021d3fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d4000, 0x021d4fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d5000, 0x021d5fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d6000, 0x021d6fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: BRK [0x021d7000, 0x021d7fff] PGTABLE Oct 02 14:00:24 bsxsxen3 kernel: RAMDISK: [mem 0x04000000-0x04ee9fff] Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Early table checksum verification disabled Oct 02 14:00:24 bsxsxen3 kernel: ACPI: RSDP 0x00000000000FA550 000024 (v02 ACPIAM) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: XSDT 0x00000000D7E90100 00007C (v01 SMCI 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: FACP 0x00000000D7E90290 0000F4 (v03 090811 FACP2038 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150930/tbfadt-623) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: DSDT 0x00000000D7E906B0 00701A (v01 1BC11 1BC11000 00000000 INTL 20051117) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: FACS 0x00000000D7EB4000 000040 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: FACS 0x00000000D7EB4000 000040 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: APIC 0x00000000D7E90390 000158 (v01 090811 APIC2038 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: MCFG 0x00000000D7E904F0 00003C (v01 090811 OEMMCFG 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: OEMB 0x00000000D7EB4040 0000BC (v01 090811 OEMB2038 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: HPET 0x00000000D7E9A6B0 000038 (v01 090811 OEMHPET 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: SRAT 0x00000000D7E9A6F0 000150 (v02 AMD AGESA 00000001 AMD 00000001) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: SLIT 0x00000000D7E9A840 000030 (v01 AMD AGESA 00000001 AMD 00000001) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: EINJ 0x00000000D7E9A870 000130 (v01 AMIER AMI\_EINJ 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: BERT 0x00000000D7E9AA00 000030 (v01 AMIER AMI\_BERT 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: ERST 0x00000000D7E9AA30 0001B0 (v01 AMIER AMI\_ERST 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: HEST 0x00000000D7E9ABE0 0000A8 (v01 AMIER ABC\_HEST 20110908 MSFT 00000097) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Local APIC address 0xfee00000 Oct 02 14:00:24 bsxsxen3 kernel: Setting APIC routing to Xen PV. Oct 02 14:00:24 bsxsxen3 kernel: NUMA turned off Oct 02 14:00:24 bsxsxen3 kernel: Faking a node at [mem 0x0000000000000000-0x0000000827ffffff] Oct 02 14:00:24 bsxsxen3 kernel: NODE\_DATA(0) allocated [mem 0x7e1488000-0x7e14b2fff] Oct 02 14:00:24 bsxsxen3 kernel: Zone ranges: Oct 02 14:00:24 bsxsxen3 kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] Oct 02 14:00:24 bsxsxen3 kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Oct 02 14:00:24 bsxsxen3 kernel: Normal [mem 0x0000000100000000-0x0000000827ffffff] Oct 02 14:00:24 bsxsxen3 kernel: Device empty Oct 02 14:00:24 bsxsxen3 kernel: Movable zone start for each node Oct 02 14:00:24 bsxsxen3 kernel: Early memory node ranges Oct 02 14:00:24 bsxsxen3 kernel: node 0: [mem 0x0000000000001000-0x0000000000095fff] Oct 02 14:00:24 bsxsxen3 kernel: node 0: [mem 0x0000000000100000-0x00000000d7e7ffff] Oct 02 14:00:24 bsxsxen3 kernel: node 0: [mem 0x0000000100000000-0x0000000827ffffff] Oct 02 14:00:24 bsxsxen3 kernel: Initmem setup node 0 [mem 0x0000000000001000-0x0000000827ffffff] Oct 02 14:00:24 bsxsxen3 kernel: On node 0 totalpages: 8388117 Oct 02 14:00:24 bsxsxen3 kernel: DMA zone: 64 pages used for memmap Oct 02 14:00:24 bsxsxen3 kernel: DMA zone: 21 pages reserved Oct 02 14:00:24 bsxsxen3 kernel: DMA zone: 3989 pages, LIFO batch:0 Oct 02 14:00:24 bsxsxen3 kernel: DMA32 zone: 13754 pages used for memmap Oct 02 14:00:24 bsxsxen3 kernel: DMA32 zone: 880256 pages, LIFO batch:31 Oct 02 14:00:24 bsxsxen3 kernel: Normal zone: 117248 pages used for memmap Oct 02 14:00:24 bsxsxen3 kernel: Normal zone: 7503872 pages, LIFO batch:31 Oct 02 14:00:24 bsxsxen3 kernel: p2m virtual area at ffffc90000000000, size is 40000000 Oct 02 14:00:24 bsxsxen3 kernel: Remapped 164330 page(s) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PM-Timer IO Port: 0x808 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Local APIC address 0xfee00000 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: LAPIC\_NMI (acpi\_id[0xff] dfl dfl lint[0x1]) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: LAPIC\_NMI (acpi\_id[0x01] high edge lint[0x1]) Oct 02 14:00:24 bsxsxen3 kernel: IOAPIC[0]: apic\_id 0, version 33, address 0xfec00000, GSI 0-23 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 0 global\_irq 2 dfl dfl) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 9 global\_irq 9 low level) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: IRQ0 used by override. Oct 02 14:00:24 bsxsxen3 kernel: ACPI: IRQ9 used by override. Oct 02 14:00:24 bsxsxen3 kernel: Using ACPI (MADT) for SMP configuration information Oct 02 14:00:24 bsxsxen3 kernel: ACPI: HPET id: 0x8300 base: 0xfed00000 Oct 02 14:00:24 bsxsxen3 kernel: smpboot: Allowing 32 CPUs, 24 hotplug CPUs Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0x00096000-0x00096fff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0x00097000-0x000fffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd7e80000-0xd7e8dfff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd7e8e000-0xd7e8ffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd7e90000-0xd7eb3fff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd7eb4000-0xd7edffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd7ee0000-0xd7ffffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xd8000000-0xdfffffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffdfffff] Oct 02 14:00:24 bsxsxen3 kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] Oct 02 14:00:24 bsxsxen3 kernel: e820: [mem 0xf0000000-0xfebfffff] available for PCI devices Oct 02 14:00:24 bsxsxen3 kernel: Booting paravirtualized kernel on Xen Oct 02 14:00:24 bsxsxen3 kernel: Xen version: 4.7.2\_04-39 (preserve-AD) Oct 02 14:00:24 bsxsxen3 kernel: clocksource: refined-jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, max\_idle\_ns: 7645519600211568 ns Oct 02 14:00:24 bsxsxen3 kernel: setup\_percpu: NR\_CPUS:8192 nr\_cpumask\_bits:32 nr\_cpu\_ids:32 nr\_node\_ids:1 Oct 02 14:00:24 bsxsxen3 kernel: PERCPU: Embedded 33 pages/cpu @ffff880808e00000 s94232 r8192 d32744 u262144 Oct 02 14:00:24 bsxsxen3 kernel: pcpu-alloc: s94232 r8192 d32744 u262144 alloc=1\*2097152 Oct 02 14:00:24 bsxsxen3 kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 Oct 02 14:00:24 bsxsxen3 kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 Oct 02 14:00:24 bsxsxen3 kernel: xen: PV spinlocks enabled Oct 02 14:00:24 bsxsxen3 kernel: PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) Oct 02 14:00:24 bsxsxen3 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 8257030 Oct 02 14:00:24 bsxsxen3 kernel: Policy zone: Normal Oct 02 14:00:24 bsxsxen3 kernel: Kernel command line: root=/dev/mapper/bsxsxen3–system-root video=800x600 resume=/dev/disk/by-uuid/76228c0d-4546-47e1-acfe-bf3271c431c2 splash=verbose quiet showopts udevchilds=128 Oct 02 14:00:24 bsxsxen3 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 02 14:00:24 bsxsxen3 kernel: software IO TLB [mem 0x804e00000-0x808e00000] (64MB) mapped at [ffff880804e00000-ffff880808dfffff] Oct 02 14:00:24 bsxsxen3 kernel: Memory: 5600388K/33552468K available (6051K kernel code, 1363K rwdata, 4920K rodata, 2032K init, 2528K bss, 1262284K reserved, 0K cma-reserved) Oct 02 14:00:24 bsxsxen3 kernel: Hierarchical RCU implementation. Oct 02 14:00:24 bsxsxen3 kernel: Build-time adjustment of leaf fanout to 64. Oct 02 14:00:24 bsxsxen3 kernel: RCU restricting CPUs from NR\_CPUS=8192 to nr\_cpu\_ids=8. Oct 02 14:00:24 bsxsxen3 kernel: RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=8 Oct 02 14:00:24 bsxsxen3 kernel: Using NULL legacy PIC Oct 02 14:00:24 bsxsxen3 kernel: NR\_IRQS:524544 nr\_irqs:488 0 Oct 02 14:00:24 bsxsxen3 kernel: xen:events: Using FIFO-based ABI Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=1 → irq=1 (gsi=1) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=2 → irq=2 (gsi=2) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=3 → irq=3 (gsi=3) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=4 → irq=4 (gsi=4) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=5 → irq=5 (gsi=5) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=6 → irq=6 (gsi=6) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=7 → irq=7 (gsi=7) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=8 → irq=8 (gsi=8) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=9 → irq=9 (gsi=9) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=10 → irq=10 (gsi=10) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=11 → irq=11 (gsi=11) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=12 → irq=12 (gsi=12) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=13 → irq=13 (gsi=13) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=14 → irq=14 (gsi=14) Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=15 → irq=15 (gsi=15) Oct 02 14:00:24 bsxsxen3 kernel: Console: colour VGA+ 80x25 Oct 02 14:00:24 bsxsxen3 kernel: console [tty0] enabled Oct 02 14:00:24 bsxsxen3 kernel: clocksource: xen: mask: 0xffffffffffffffff max\_cycles: 0x1cd42e4dffb, max\_idle\_ns: 881590591483 ns Oct 02 14:00:24 bsxsxen3 kernel: Xen: using vcpuop timer interface Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 0 Oct 02 14:00:24 bsxsxen3 kernel: tsc: Detected 2000.012 MHz processor Oct 02 14:00:24 bsxsxen3 kernel: Calibrating delay loop (skipped), value calculated using timer frequency… 4000.02 BogoMIPS (lpj=8000048) Oct 02 14:00:24 bsxsxen3 kernel: pid\_max: default: 32768 minimum: 301 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Core revision 20150930 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: 1 ACPI AML tables successfully acquired and loaded Oct 02 14:00:24 bsxsxen3 kernel: Security Framework initialized Oct 02 14:00:24 bsxsxen3 kernel: AppArmor: AppArmor initialized Oct 02 14:00:24 bsxsxen3 kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Oct 02 14:00:24 bsxsxen3 kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Oct 02 14:00:24 bsxsxen3 kernel: Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 02 14:00:24 bsxsxen3 kernel: Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys io Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys memory Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys devices Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys freezer Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys net\_cls Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys perf\_event Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys net\_prio Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys hugetlb Oct 02 14:00:24 bsxsxen3 kernel: Initializing cgroup subsys pids Oct 02 14:00:24 bsxsxen3 kernel: CPU: Physical Processor ID: 0 Oct 02 14:00:24 bsxsxen3 kernel: CPU: Processor Core ID: 0 Oct 02 14:00:24 bsxsxen3 kernel: mce: CPU supports 2 MCE banks Oct 02 14:00:24 bsxsxen3 kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Oct 02 14:00:24 bsxsxen3 kernel: Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 Oct 02 14:00:24 bsxsxen3 kernel: Freeing SMP alternatives memory: 24K (ffffffff81f52000 - ffffffff81f58000) Oct 02 14:00:24 bsxsxen3 kernel: ftrace: allocating 25061 entries in 98 pages Oct 02 14:00:24 bsxsxen3 kernel: cpu 0 spinlock event irq 25 Oct 02 14:00:24 bsxsxen3 kernel: VPMU disabled by hypervisor. Oct 02 14:00:24 bsxsxen3 kernel: Performance Events: PMU not available due to virtualization, using software events only. Oct 02 14:00:24 bsxsxen3 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled Oct 02 14:00:24 bsxsxen3 kernel: NMI watchdog: Shutting down hard lockup detector on all cpus Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 1 Oct 02 14:00:24 bsxsxen3 kernel: cpu 1 spinlock event irq 32 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 2 Oct 02 14:00:24 bsxsxen3 kernel: cpu 2 spinlock event irq 39 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 3 Oct 02 14:00:24 bsxsxen3 kernel: cpu 3 spinlock event irq 46 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 4 Oct 02 14:00:24 bsxsxen3 kernel: cpu 4 spinlock event irq 53 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 5 Oct 02 14:00:24 bsxsxen3 kernel: cpu 5 spinlock event irq 60 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 6 Oct 02 14:00:24 bsxsxen3 kernel: cpu 6 spinlock event irq 67 Oct 02 14:00:24 bsxsxen3 kernel: installing Xen timer for CPU 7 Oct 02 14:00:24 bsxsxen3 kernel: cpu 7 spinlock event irq 74 Oct 02 14:00:24 bsxsxen3 kernel: x86: Booted up 1 node, 8 CPUs Oct 02 14:00:24 bsxsxen3 kernel: node 0 initialised, 6672449 pages in 220ms Oct 02 14:00:24 bsxsxen3 kernel: devtmpfs: initialized Oct 02 14:00:24 bsxsxen3 kernel: evm: security.selinux Oct 02 14:00:24 bsxsxen3 kernel: evm: security.ima Oct 02 14:00:24 bsxsxen3 kernel: evm: security.capability Oct 02 14:00:24 bsxsxen3 kernel: PM: Registering ACPI NVS region [mem 0xd7eb4000-0xd7edffff] (180224 bytes) Oct 02 14:00:24 bsxsxen3 kernel: clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, max\_idle\_ns: 7645041785100000 ns Oct 02 14:00:24 bsxsxen3 kernel: futex hash table entries: 2048 (order: 5, 131072 bytes) Oct 02 14:00:24 bsxsxen3 kernel: pinctrl core: initialized pinctrl subsystem Oct 02 14:00:24 bsxsxen3 kernel: RTC time: 14:00:21, date: 10/02/17 Oct 02 14:00:24 bsxsxen3 kernel: NET: Registered protocol family 16 Oct 02 14:00:24 bsxsxen3 kernel: xen:grant\_table: Grant tables using version 1 layout Oct 02 14:00:24 bsxsxen3 kernel: Grant table initialized Oct 02 14:00:24 bsxsxen3 kernel: node 0 link 3: io port [8000, efff] Oct 02 14:00:24 bsxsxen3 kernel: TOM: 00000000d8000000 aka 3456M Oct 02 14:00:24 bsxsxen3 kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff] Oct 02 14:00:24 bsxsxen3 kernel: node 0 link 3: mmio [dd000000, dfffffff] Oct 02 14:00:24 bsxsxen3 kernel: node 0 link 3: mmio [a0000, bffff] Oct 02 14:00:24 bsxsxen3 kernel: node 0 link 3: mmio [f0000000, ffffffff] Oct 02 14:00:24 bsxsxen3 kernel: TOM2: 0000000828000000 aka 33408M Oct 02 14:00:24 bsxsxen3 kernel: bus: [bus 00-03] on node 0 link 3 Oct 02 14:00:24 bsxsxen3 kernel: bus: 00 [io 0x0000-0xffff] Oct 02 14:00:24 bsxsxen3 kernel: bus: 00 [mem 0xd8000000-0xdfffffff] Oct 02 14:00:24 bsxsxen3 kernel: bus: 00 [mem 0x000a0000-0x000bffff] Oct 02 14:00:24 bsxsxen3 kernel: bus: 00 [mem 0xf0000000-0xffffffff] Oct 02 14:00:24 bsxsxen3 kernel: bus: 00 [mem 0x828000000-0xfcffffffff] Oct 02 14:00:24 bsxsxen3 kernel: ACPI: bus type PCI registered Oct 02 14:00:24 bsxsxen3 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Oct 02 14:00:24 bsxsxen3 kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Oct 02 14:00:24 bsxsxen3 kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Oct 02 14:00:24 bsxsxen3 kernel: PCI: Using configuration type 1 for base access Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Added \_OSI(Module Device) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Added \_OSI(Processor Device) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Added \_OSI(3.0 \_SCP Extensions) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Added \_OSI(Processor Aggregator Device) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 9 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Executed 2 blocks of module-level executable AML code Oct 02 14:00:24 bsxsxen3 kernel: \_SB_:\_OSC evaluation returned wrong type Oct 02 14:00:24 bsxsxen3 kernel: \_OSC request data:1 1f Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Interpreter enabled Oct 02 14:00:24 bsxsxen3 kernel: ACPI: (supports S0 S1 S4 S5) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: Using IOAPIC for interrupt routing Oct 02 14:00:24 bsxsxen3 kernel: HEST: Table parsing has been initialized. Oct 02 14:00:24 bsxsxen3 kernel: PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03]) Oct 02 14:00:24 bsxsxen3 kernel: acpi PNP0A08:00: \_OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] Oct 02 14:00:24 bsxsxen3 kernel: acpi PNP0A08:00: \_OSC failed (AE\_NOT\_FOUND); disabling ASPM Oct 02 14:00:24 bsxsxen3 kernel: PCI host bridge to bus 0000:00 Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [io 0x0000-0x03af window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [io 0x03c0-0x03df window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [mem 0xde000000-0xdfffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [mem 0xdd000000-0xddffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: root bus resource [bus 00-03] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:00.0: [1002:5a10] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: reg 0x24: [mem 0xdfcf8400-0xdfcf87ff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:11.0: set SATA to AHCI mode Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.0: reg 0x10: [mem 0xdfcf7000-0xdfcf7fff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.0: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.1: reg 0x10: [mem 0xdfcf6000-0xdfcf6fff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.1: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.2: reg 0x10: [mem 0xdfcf8800-0xdfcf88ff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.2: supports D1 D2 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:12.2: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.0: reg 0x10: [mem 0xdfcfa000-0xdfcfafff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.0: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.1: reg 0x10: [mem 0xdfcf9000-0xdfcf9fff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.1: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.2: reg 0x10: [mem 0xdfcf8c00-0xdfcf8cff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.2: supports D1 D2 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:13.2: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.5: reg 0x10: [mem 0xdfcfb000-0xdfcfbfff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.5: System wakeup disabled by ACPI Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: [9005:028d] type 00 class 0x010400 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: reg 0x10: [mem 0xdff00000-0xdfffffff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: reg 0x18: [mem 0xdfe7fc00-0xdfe7ffff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: reg 0x20: [io 0xe800-0xe8ff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: reg 0x30: [mem 0xdfe80000-0xdfefffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:03:00.0: PME# supported from D0 D1 D3hot Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: PCI bridge to [bus 03] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: bridge window [io 0xe000-0xefff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: bridge window [mem 0xdfe00000-0xdfffffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: [8086:10c9] type 00 class 0x020000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x10: [mem 0xdfde0000-0xdfdfffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x14: [mem 0xdfdc0000-0xdfddffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd81f] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x1c: [mem 0xdfd9c000-0xdfd9ffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x30: [mem 0xdfda0000-0xdfdbffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: [8086:10c9] type 00 class 0x020000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x10: [mem 0xdfd60000-0xdfd7ffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x14: [mem 0xdfd40000-0xdfd5ffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x18: [io 0xd400-0xd41f] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x1c: [mem 0xdfd1c000-0xdfd1ffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x30: [mem 0xdfd20000-0xdfd3ffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: PME# supported from D0 D3hot D3cold Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: PCI bridge to [bus 02] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: bridge window [mem 0xdfd00000-0xdfdfffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:01:04.0: [102b:0532] type 00 class 0x030000 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:01:04.0: reg 0x10: [mem 0xdd000000-0xddffffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:01:04.0: reg 0x14: [mem 0xdeffc000-0xdeffffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:01:04.0: reg 0x18: [mem 0xdf000000-0xdf7fffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xdef00000-0xdf7fffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03bb window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [io 0x03c0-0x03df window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xde000000-0xdfffffff window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff window] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 13 triggering 1 polarity 0 Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 \*11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 \*10 11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 \*11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 \*10 11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 \*10 11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) \*0, disabled. Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 \*10 11 12 14 15) Oct 02 14:00:24 bsxsxen3 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) \*0, disabled. Oct 02 14:00:24 bsxsxen3 kernel: xen:balloon: Initialising balloon driver Oct 02 14:00:24 bsxsxen3 kernel: xen\_balloon: Initialising balloon driver Oct 02 14:00:24 bsxsxen3 kernel: vgaarb: setting as boot device: PCI:0000:01:04.0 Oct 02 14:00:24 bsxsxen3 kernel: vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none Oct 02 14:00:24 bsxsxen3 kernel: vgaarb: loaded Oct 02 14:00:24 bsxsxen3 kernel: vgaarb: bridge control possible 0000:01:04.0 Oct 02 14:00:24 bsxsxen3 kernel: PCI: Using ACPI for IRQ routing Oct 02 14:00:24 bsxsxen3 kernel: PCI: pci\_cache\_line\_size set to 64 bytes Oct 02 14:00:24 bsxsxen3 kernel: e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] Oct 02 14:00:24 bsxsxen3 kernel: e820: reserve RAM buffer [mem 0xd7e80000-0xd7ffffff] Oct 02 14:00:24 bsxsxen3 kernel: NetLabel: Initializing Oct 02 14:00:24 bsxsxen3 kernel: NetLabel: domain hash size = 128 Oct 02 14:00:24 bsxsxen3 kernel: NetLabel: protocols = UNLABELED CIPSOv4 Oct 02 14:00:24 bsxsxen3 kernel: NetLabel: unlabeled traffic allowed by default Oct 02 14:00:24 bsxsxen3 kernel: clocksource: Switched to clocksource xen Oct 02 14:00:24 bsxsxen3 kernel: AppArmor: AppArmor Filesystem Enabled Oct 02 14:00:24 bsxsxen3 kernel: pnp: PnP ACPI init Oct 02 14:00:24 bsxsxen3 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 8 triggering 1 polarity 0 Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0ca2-0x0ca3] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0550-0x0551] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x040b] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x04d6] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c00-0x0c01] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c14] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c50-0x0c51] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c52] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c6c] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0c6f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0cd0-0x0cd1] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0cd2-0x0cd3] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0cd4-0x0cd5] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0cd6-0x0cd7] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0cd8-0x0cdf] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0800-0x089f] could not be reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0b00-0x0b0f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0b20-0x0b3f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0900-0x090f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0x0910-0x091f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [io 0xfe00-0xfefe] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 4 triggering 1 polarity 0 Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:05: [dma 0 disabled] Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 3 triggering 1 polarity 0 Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:06: [dma 0 disabled] Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:07: [io 0x0a00-0x0a0f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:07: [io 0x0a10-0x0a1f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 7 triggering 1 polarity 0 Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:08: [dma 0 disabled] Oct 02 14:00:24 bsxsxen3 kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:09: [io 0x164e-0x164f] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 02 14:00:24 bsxsxen3 kernel: system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved Oct 02 14:00:24 bsxsxen3 kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 02 14:00:24 bsxsxen3 kernel: pnp: PnP ACPI: found 12 devices Oct 02 14:00:24 bsxsxen3 kernel: PM-Timer failed consistency check (0xffffff) - aborting. Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: PCI bridge to [bus 03] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: bridge window [io 0xe000-0xefff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:04.0: bridge window [mem 0xdfe00000-0xdfffffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: BAR 7: no space for [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: BAR 7: failed to assign [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: BAR 10: no space for [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.0: BAR 10: failed to assign [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: BAR 7: no space for [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: BAR 7: failed to assign [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: BAR 10: no space for [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:02:00.1: BAR 10: failed to assign [mem size 0x00020000 64bit] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: PCI bridge to [bus 02] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:0d.0: bridge window [mem 0xdfd00000-0xdfdfffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: PCI bridge to [bus 01] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xdef00000-0xdf7fffff] Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 4 [io 0x0000-0x03af window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 6 [io 0x03b0-0x03bb window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 7 [io 0x03c0-0x03df window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 8 [io 0x0d00-0xffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 10 [mem 0x000d0000-0x000dffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 11 [mem 0xde000000-0xdfffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 12 [mem 0xdd000000-0xddffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:03: resource 0 [io 0xe000-0xefff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfffffff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:02: resource 0 [io 0xd000-0xdfff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 1 [mem 0xdef00000-0xdf7fffff] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 2 [mem 0xdd000000-0xddffffff pref] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 4 [io 0x0000-0x03af window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 6 [io 0x03b0-0x03bb window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 7 [io 0x03c0-0x03df window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 8 [io 0x0d00-0xffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 9 [mem 0x000a0000-0x000bffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 10 [mem 0x000d0000-0x000dffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 11 [mem 0xde000000-0xdfffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 12 [mem 0xdd000000-0xddffffff window] Oct 02 14:00:24 bsxsxen3 kernel: pci\_bus 0000:01: resource 13 [mem 0xfed40000-0xfed44fff] Oct 02 14:00:24 bsxsxen3 kernel: NET: Registered protocol family 2 Oct 02 14:00:24 bsxsxen3 kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes) Oct 02 14:00:24 bsxsxen3 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 02 14:00:24 bsxsxen3 kernel: TCP: Hash tables configured (established 262144 bind 65536) Oct 02 14:00:24 bsxsxen3 kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes) Oct 02 14:00:24 bsxsxen3 kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) Oct 02 14:00:24 bsxsxen3 kernel: NET: Registered protocol family 1 Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=16 → irq=16 (gsi=16) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 17 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=17 → irq=17 (gsi=17) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 18 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=18 → irq=18 (gsi=18) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 18 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: Already setup the GSI :18 Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 19 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: xen: → pirq=19 → irq=19 (gsi=19) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 18 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: Already setup the GSI :18 Oct 02 14:00:24 bsxsxen3 kernel: pci 0000:01:04.0: Video device with shadowed ROM Oct 02 14:00:24 bsxsxen3 kernel: PCI: CLS 64 bytes, default 64 Oct 02 14:00:24 bsxsxen3 kernel: Unpacking initramfs… Oct 02 14:00:24 bsxsxen3 kernel: Freeing initrd memory: 15272K (ffff880004000000 - ffff880004eea000) Oct 02 14:00:24 bsxsxen3 kernel: Scanning for low memory corruption every 60 seconds Oct 02 14:00:24 bsxsxen3 kernel: kgr: successfully initialized Oct 02 14:00:24 bsxsxen3 kernel: audit: initializing netlink subsys (disabled) Oct 02 14:00:24 bsxsxen3 kernel: audit: type=2000 audit(1506952824.092:1): initialized Oct 02 14:00:24 bsxsxen3 kernel: Initialise system trusted keyring Oct 02 14:00:24 bsxsxen3 kernel: zbud: loaded Oct 02 14:00:24 bsxsxen3 kernel: VFS: Disk quotas dquot\_6.6.0 Oct 02 14:00:24 bsxsxen3 kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 02 14:00:24 bsxsxen3 kernel: hugetlbfs: disabling because there are no supported hugepage sizes Oct 02 14:00:24 bsxsxen3 kernel: Key type asymmetric registered Oct 02 14:00:24 bsxsxen3 kernel: Asymmetric key parser ‘x509’ registered Oct 02 14:00:24 bsxsxen3 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Oct 02 14:00:24 bsxsxen3 kernel: io scheduler noop registered Oct 02 14:00:24 bsxsxen3 kernel: io scheduler deadline registered Oct 02 14:00:24 bsxsxen3 kernel: io scheduler cfq registered (default) Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:24 bsxsxen3 kernel: xen: registering gsi 17 triggering 0 polarity 1 Oct 02 14:00:24 bsxsxen3 kernel: Already setup the GSI :17 Oct 02 14:00:24 bsxsxen3 kernel: pci\_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 02 14:00:24 bsxsxen3 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 02 14:00:24 bsxsxen3 kernel: ERST: Failed to get Error Log Address Range. Oct 02 14:00:24 bsxsxen3 kernel: [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. Oct 02 14:00:24 bsxsxen3 kernel: GHES: APEI firmware first mode is enabled by WHEA \_OSC. Oct 02 14:00:24 bsxsxen3 kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled Oct 02 14:00:24 bsxsxen3 kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base\_baud = 115200) is a 16550A Oct 02 14:00:24 bsxsxen3 kernel: 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base\_baud = 115200) is a 16550A Oct 02 14:00:24 bsxsxen3 kernel: 00:08: ttyS2 at I/O 0x3e8 (irq = 7, base\_baud = 115200) is a 16550A Oct 02 14:00:24 bsxsxen3 kernel: hpet\_acpi\_add: no address or irqs in \_CRS Oct 02 14:00:24 bsxsxen3 kernel: Non-volatile memory driver v1.3 Oct 02 14:00:24 bsxsxen3 kernel: Linux agpgart interface v0.103 Oct 02 14:00:24 bsxsxen3 kernel: i8042: PNP: No PS/2 controller found. Oct 02 14:00:24 bsxsxen3 kernel: i8042: Probing ports directly. Oct 02 14:00:24 bsxsxen3 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 02 14:00:24 bsxsxen3 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 02 14:00:24 bsxsxen3 kernel: mousedev: PS/2 mouse device common for all mice Oct 02 14:00:24 bsxsxen3 kernel: rtc\_cmos 00:02: RTC can wake from S4 Oct 02 14:00:24 bsxsxen3 kernel: rtc\_cmos 00:02: rtc core: registered rtc\_cmos as rtc0 Oct 02 14:00:24 bsxsxen3 kernel: rtc\_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram Oct 02 14:00:24 bsxsxen3 kernel: ledtrig-cpu: registered to indicate activity on CPUs Oct 02 14:00:24 bsxsxen3 kernel: hidraw: raw HID events driver (C) Jiri Kosina Oct 02 14:00:24 bsxsxen3 kernel: NET: Registered protocol family 10 Oct 02 14:00:24 bsxsxen3 kernel: mce: Unable to init device /dev/mcelog (rc: -16) Oct 02 14:00:24 bsxsxen3 kernel: registered taskstats version 1 Oct 02 14:00:24 bsxsxen3 kernel: Loading compiled-in X.509 certificates Oct 02 14:00:24 bsxsxen3 kernel: Loaded X.509 cert ‘SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7’ Oct 02 14:00:24 bsxsxen3 kernel: Loaded X.509 cert ‘SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7’ Oct 02 14:00:24 bsxsxen3 kernel: zswap: loaded using pool lzo/zbud Oct 02 14:00:24 bsxsxen3 kernel: page\_owner is disabled Oct 02 14:00:24 bsxsxen3 kernel: Key type trusted registered Oct 02 14:00:24 bsxsxen3 kernel: Key type encrypted registered Oct 02 14:00:24 bsxsxen3 kernel: AppArmor: AppArmor sha1 policy hashing enabled Oct 02 14:00:24 bsxsxen3 kernel: ima: No TPM chip found, activating TPM-bypass! Oct 02 14:00:24 bsxsxen3 kernel: evm: HMAC attrs: 0x1 Oct 02 14:00:24 bsxsxen3 kernel: Magic number: 5:619:29 Oct 02 14:00:24 bsxsxen3 kernel: memory memory69: hash matches Oct 02 14:00:24 bsxsxen3 kernel: PM: Checking hibernation image partition /dev/disk/by-uuid/76228c0d-4546-47e1-acfe-bf3271c431c2 Oct 02 14:00:24 bsxsxen3 kernel: PM: Hibernation image not present or could not be loaded. Oct 02 14:00:24 bsxsxen3 kernel: Freeing unused kernel memory: 2032K (ffffffff81d56000 - ffffffff81f52000) Oct 02 14:00:24 bsxsxen3 kernel: Write protecting the kernel read-only data: 12288k Oct 02 14:00:24 bsxsxen3 kernel: Freeing unused kernel memory: 76K (ffff8800015ed000 - ffff880001600000) Oct 02 14:00:24 bsxsxen3 kernel: Freeing unused kernel memory: 1224K (ffff880001ace000 - ffff880001c00000) Oct 02 14:00:24 bsxsxen3 systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 58 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 58 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 58 bits of entropy available) Oct 02 14:00:24 bsxsxen3 systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) Oct 02 14:00:24 bsxsxen3 systemd[1]: Detected virtualization vm-other. Oct 02 14:00:24 bsxsxen3 systemd[1]: Detected architecture x86-64. Oct 02 14:00:24 bsxsxen3 systemd[1]: Running in initial RAM disk. Oct 02 14:00:24 bsxsxen3 systemd[1]: Set hostname to . Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 kernel: random: systemd: uninitialized urandom read (16 bytes read, 71 bits of entropy available) Oct 02 14:00:24 bsxsxen3 systemd[1]: Listening on Journal Audit Socket. Oct 02 14:00:24 bsxsxen3 systemd[1]: Listening on udev Control Socket. Oct 02 14:00:24 bsxsxen3 systemd[1]: Reached target Timers. Oct 02 14:00:24 bsxsxen3 systemd[1]: Reached target Swap. Oct 02 14:00:24 bsxsxen3 systemd[1]: Listening on Journal Socket (/dev/log). Oct 02 14:00:24 bsxsxen3 kernel: SCSI subsystem initialized Oct 02 14:00:24 bsxsxen3 kernel: alua: device handler registered Oct 02 14:00:24 bsxsxen3 kernel: emc: device handler registered Oct 02 14:00:24 bsxsxen3 kernel: rdac: device handler registered Oct 02 14:00:24 bsxsxen3 kernel: device-mapper: uevent: version 1.0.3 Oct 02 14:00:24 bsxsxen3 kernel: device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [dm-devel@redhat.com](mailto:dm-devel@redhat.com) Oct 02 14:00:24 bsxsxen3 kernel: device-mapper: multipath: version 1.11.0 loaded Oct 02 14:00:24 bsxsxen3 systemd-journald[139]: Journal started Oct 02 14:00:24 bsxsxen3 systemd-modules-load[147]: Inserted module ‘scsi\_dh\_alua’ Oct 02 14:00:24 bsxsxen3 systemd-modules-load[147]: Inserted module ‘scsi\_dh\_emc’ Oct 02 14:00:24 bsxsxen3 systemd-modules-load[147]: Inserted module ‘scsi\_dh\_rdac’ Oct 02 14:00:24 bsxsxen3 systemd-modules-load[147]: Inserted module ‘dm\_multipath’ Oct 02 14:00:24 bsxsxen3 systemd-modules-load[147]: Inserted module ‘sg’ Oct 02 14:00:24 bsxsxen3 systemd-sysctl[170]: Couldn’t write ‘0’ to ‘dev/cdrom/autoclose’, ignoring: No such file or directory Oct 02 14:00:24 bsxsxen3 systemd-sysctl[170]: Couldn’t write ‘0’ to ‘net/bridge/bridge-nf-call-ip6tables’, ignoring: No such file or directory Oct 02 14:00:24 bsxsxen3 systemd-sysctl[170]: Couldn’t write ‘0’ to ‘net/bridge/bridge-nf-call-iptables’, ignoring: No such file or directory Oct 02 14:00:24 bsxsxen3 dracut-cmdline[142]: dracut-12-SP2 dracut-044-109.5.3 Oct 02 14:00:24 bsxsxen3 dracut-cmdline[142]: Using kernel command line parameters: rd.lvm.lv=bsxsxen3-system/swap rd.lvm.lv=bsxsxen3-system/root resume=/dev/mapper/bsxsxen3–system-swap root=/dev/mapper/bsxsxen3–system-root rootfstype=ext4 rootflags=rw,relatime,data=ordered root=/dev/mapper/bsxsxen3–system-root video=800x600 resume=/dev/disk/by-uuid/76228c0d-4546-47e1-acfe-bf3271c431c2 splash=verbose quiet showopts udevchilds=128 Oct 02 14:00:24 bsxsxen3 systemd[1]: Started dracut cmdline hook. Oct 02 14:00:24 bsxsxen3 systemd[1]: Starting dracut pre-udev hook… Oct 02 14:00:24 bsxsxen3 systemd[1]: Started dracut pre-udev hook. Oct 02 14:00:24 bsxsxen3 systemd[1]: Starting udev Kernel Device Manager… Oct 02 14:00:24 bsxsxen3 systemd-udevd[267]: Network interface NamePolicy= disabled by default. Oct 02 14:00:24 bsxsxen3 systemd[1]: Started udev Kernel Device Manager. Oct 02 14:00:24 bsxsxen3 systemd[1]: Starting dracut pre-trigger hook… Oct 02 14:00:24 bsxsxen3 systemd[1]: Started dracut pre-trigger hook. Oct 02 14:00:24 bsxsxen3 systemd[1]: Starting udev Coldplug all Devices… Oct 02 14:00:24 bsxsxen3 systemd-udevd[267]: Network interface NamePolicy= disabled by default. Oct 02 14:00:24 bsxsxen3 systemd[1]: Started udev Coldplug all Devices. Oct 02 14:00:25 bsxsxen3 kernel: libata version 3.00 loaded. Oct 02 14:00:25 bsxsxen3 kernel: ACPI: bus type USB registered Oct 02 14:00:25 bsxsxen3 kernel: usbcore: registered new interface driver usbfs Oct 02 14:00:25 bsxsxen3 kernel: usbcore: registered new interface driver hub Oct 02 14:00:25 bsxsxen3 kernel: usbcore: registered new device driver usb Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:25 bsxsxen3 kernel: ehci\_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci: EHCI PCI platform driver Oct 02 14:00:25 bsxsxen3 kernel: Adaptec aacraid driver 1.2-1[41066]-ms Oct 02 14:00:25 bsxsxen3 kernel: aacraid 0000:03:00.0: can’t disable ASPM; OS doesn’t have ASPM control Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:25 bsxsxen3 kernel: scsi host0: pata\_atiixp Oct 02 14:00:25 bsxsxen3 kernel: scsi host2: pata\_atiixp Oct 02 14:00:25 bsxsxen3 kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 Oct 02 14:00:25 bsxsxen3 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 Oct 02 14:00:25 bsxsxen3 kernel: ohci\_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver Oct 02 14:00:25 bsxsxen3 kernel: [drm] Initialized drm 1.1.0 20060810 Oct 02 14:00:25 bsxsxen3 kernel: ahci 0000:00:11.0: version 3.0 Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 22 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: xen: → pirq=22 → irq=22 (gsi=22) Oct 02 14:00:25 bsxsxen3 kernel: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode Oct 02 14:00:25 bsxsxen3 kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc Oct 02 14:00:25 bsxsxen3 kernel: scsi host3: ahci Oct 02 14:00:25 bsxsxen3 kernel: scsi host4: ahci Oct 02 14:00:25 bsxsxen3 kernel: scsi host5: ahci Oct 02 14:00:25 bsxsxen3 kernel: scsi host6: ahci Oct 02 14:00:25 bsxsxen3 kernel: ata3: SATA max UDMA/133 abar m1024@0xdfcf8400 port 0xdfcf8500 irq 22 Oct 02 14:00:25 bsxsxen3 kernel: ata4: SATA max UDMA/133 abar m1024@0xdfcf8400 port 0xdfcf8580 irq 22 Oct 02 14:00:25 bsxsxen3 kernel: ata5: SATA max UDMA/133 abar m1024@0xdfcf8400 port 0xdfcf8600 irq 22 Oct 02 14:00:25 bsxsxen3 kernel: ata6: SATA max UDMA/133 abar m1024@0xdfcf8400 port 0xdfcf8680 irq 22 Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 17 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :17 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: EHCI Host Controller Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: debug port 1 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xdfcf8800 Oct 02 14:00:25 bsxsxen3 kernel: AAC0: kernel 7.8-0[32722] May 15 2015 Oct 02 14:00:25 bsxsxen3 kernel: AAC0: monitor 7.8-0[32722] Oct 02 14:00:25 bsxsxen3 kernel: AAC0: bios 7.8-0[32722] Oct 02 14:00:25 bsxsxen3 kernel: AAC0: serial 6A236367458 Oct 02 14:00:25 bsxsxen3 kernel: AAC0: Non-DASD support enabled. Oct 02 14:00:25 bsxsxen3 kernel: AAC0: 64bit support enabled. Oct 02 14:00:25 bsxsxen3 kernel: AAC0: 64 Bit DAC enabled Oct 02 14:00:25 bsxsxen3 kernel: random: nonblocking pool is initialized Oct 02 14:00:25 bsxsxen3 kernel: scsi host1: aacraid Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 Oct 02 14:00:25 bsxsxen3 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Oct 02 14:00:25 bsxsxen3 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 02 14:00:25 bsxsxen3 kernel: usb usb1: Product: EHCI Host Controller Oct 02 14:00:25 bsxsxen3 kernel: usb usb1: Manufacturer: Linux 4.4.59-92.17-default ehci\_hcd Oct 02 14:00:25 bsxsxen3 kernel: usb usb1: SerialNumber: 0000:00:12.2 Oct 02 14:00:25 bsxsxen3 kernel: hub 1-0:1.0: USB hub found Oct 02 14:00:25 bsxsxen3 kernel: hub 1-0:1.0: 6 ports detected Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 19 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :19 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: EHCI Host Controller Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: debug port 1 Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: irq 19, io mem 0xdfcf8c00 Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 20 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: xen: → pirq=20 → irq=20 (gsi=20) Oct 02 14:00:25 bsxsxen3 systemd[1]: Starting dracut initqueue hook… Oct 02 14:00:25 bsxsxen3 systemd[1]: Starting Show Plymouth Boot Screen… Oct 02 14:00:25 bsxsxen3 kernel: [TTM] Zone kernel: Available graphics memory: 16154406 kiB Oct 02 14:00:25 bsxsxen3 kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB Oct 02 14:00:25 bsxsxen3 kernel: [TTM] Initializing pool allocator Oct 02 14:00:25 bsxsxen3 kernel: [TTM] Initializing DMA pool allocator Oct 02 14:00:25 bsxsxen3 kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 Oct 02 14:00:25 bsxsxen3 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Oct 02 14:00:25 bsxsxen3 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 02 14:00:25 bsxsxen3 kernel: usb usb2: Product: EHCI Host Controller Oct 02 14:00:25 bsxsxen3 kernel: usb usb2: Manufacturer: Linux 4.4.59-92.17-default ehci\_hcd Oct 02 14:00:25 bsxsxen3 kernel: usb usb2: SerialNumber: 0000:00:13.2 Oct 02 14:00:25 bsxsxen3 kernel: hub 2-0:1.0: USB hub found Oct 02 14:00:25 bsxsxen3 kernel: hub 2-0:1.0: 6 ports detected Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci: OHCI PCI platform driver Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.0: irq 16, io mem 0xdfcf7000 Oct 02 14:00:25 bsxsxen3 systemd[1]: Received SIGRTMIN+20 from PID 350 (plymouthd). Oct 02 14:00:25 bsxsxen3 systemd[1]: Started Show Plymouth Boot Screen. Oct 02 14:00:25 bsxsxen3 systemd[1]: Reached target Paths. Oct 02 14:00:25 bsxsxen3 systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Oct 02 14:00:25 bsxsxen3 kernel: clocksource: tsc: mask: 0xffffffffffffffff max\_cycles: 0x1cd43976ed6, max\_idle\_ns: 440795242551 ns Oct 02 14:00:25 bsxsxen3 kernel: fbcon: mgadrmfb (fb0) is primary device Oct 02 14:00:25 bsxsxen3 kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Oct 02 14:00:25 bsxsxen3 kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 02 14:00:25 bsxsxen3 kernel: usb usb3: Product: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: usb usb3: Manufacturer: Linux 4.4.59-92.17-default ohci\_hcd Oct 02 14:00:25 bsxsxen3 kernel: usb usb3: SerialNumber: 0000:00:12.0 Oct 02 14:00:25 bsxsxen3 kernel: hub 3-0:1.0: USB hub found Oct 02 14:00:25 bsxsxen3 kernel: hub 3-0:1.0: 3 ports detected Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 16 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :16 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.1: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:12.1: irq 16, io mem 0xdfcf6000 Oct 02 14:00:25 bsxsxen3 kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Oct 02 14:00:25 bsxsxen3 kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 02 14:00:25 bsxsxen3 kernel: usb usb4: Product: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: usb usb4: Manufacturer: Linux 4.4.59-92.17-default ohci\_hcd Oct 02 14:00:25 bsxsxen3 kernel: usb usb4: SerialNumber: 0000:00:12.1 Oct 02 14:00:25 bsxsxen3 kernel: hub 4-0:1.0: USB hub found Oct 02 14:00:25 bsxsxen3 kernel: hub 4-0:1.0: 3 ports detected Oct 02 14:00:25 bsxsxen3 kernel: xen: registering gsi 18 triggering 0 polarity 1 Oct 02 14:00:25 bsxsxen3 kernel: Already setup the GSI :18 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 Oct 02 14:00:25 bsxsxen3 kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xdfcfa000 Oct 02 14:00:25 bsxsxen3 kernel: ata1.01: ATAPI: Optiarc DVD RW AD-7740H, 1.00, max UDMA/100 Oct 02 14:00:25 bsxsxen3 kernel: ata1.01: configured for UDMA/100 Oct 02 14:00:25 bsxsxen3 kernel: scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7740H 1.00 PQ: 0 ANSI: 5 Oct 02 14:00:25 bsxsxen3 kernel: scsi 0:0:1:0: Attached scsi generic sg0 type 5 Oct 02 14:00:25 bsxsxen3 kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Oct 02 14:00:25 bsxsxen3 kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 02 14:00:25 bsxsxen3 kernel: usb usb5: Product: OHCI PCI host controller Oct 02 14:00:25 bsxsxen3 kernel: usb usb5: Manufacturer: Linux 4.4.59-92.17-default ohci\_hcd Oct 02 14:0 ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [October 3, 2017, 4:15pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/2 "2017-10-03T16:15:00Z")
On 03/10/17 13:14, gruner wrote: [color=blue] > I install SLES12SP2 and want to run as a XEN Host > But SLES12SP2 doesn’t boot with XEN hypervisor only without > I have Adaptec 8805 Raid Controller. If I change this Controller thru > older one 6805 > SLES12SP2 Server start normally with XEN or without no problem. > Doesn’t anyone have idea what is here wrong[/color] …snip.. [color=blue] > Oct 02 14:00:24 bsxsxen3 kernel: Linux version 4.4.59-92.17-default[/color] > The above is not the latest kernel available for SLES12 SP2 so can you > update your server then retry? ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 3, 2017, 5:03pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/3 "2017-10-03T17:03:15Z")
Hi Simon, it doesn’t help, even today I try with new Version of SLES12 SP2 and also with SLES 12 SP3 I have the same resultats Server doesn’t boot with XEN bsxsxen3:~ # uname -a Linux bsxsxen3 4.4.82-6.9-default #1 SMP Tue Sep 19 06:38:15 UTC 2017 (d4a2d80) x86\_64 x86\_64 x86\_64 GNU/Linux bsxsxen3:~ # cat /etc/os-release NAME=“SLES” VERSION=“12-SP3” VERSION\_ID=“12.3” PRETTY\_NAME=“SUSE Linux Enterprise Server 12 SP3” ID=“sles” ANSI\_COLOR=“0;32” CPE\_NAME=“cpe:/o:suse:sles:12:sp3” Thanks Amila [QUOTE=smflood;39766]On 03/10/17 13:14, gruner wrote: [color=blue] > I install SLES12SP2 and want to run as a XEN Host > But SLES12SP2 doesn’t boot with XEN hypervisor only without > I have Adaptec 8805 Raid Controller. If I change this Controller thru > older one 6805 > SLES12SP2 Server start normally with XEN or without no problem. > Doesn’t anyone have idea what is here wrong[/color] …snip.. [color=blue] > Oct 02 14:00:24 bsxsxen3 kernel: Linux version 4.4.59-92.17-default[/color] > The above is not the latest kernel available for SLES12 SP2 so can you > update your server then retry? ## HTH. Simon SUSE Knowledge Partner * * * If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ------------------------------------------------------------------------[/QUOTE] ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [October 3, 2017, 5:37pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/4 "2017-10-03T17:37:14Z")
On 03/10/17 15:04, gruner wrote: [color=blue] > it doesn’t help, even today I try with new Version of SLES12 SP2 and > also with SLES 12 SP3 > I have the same resultats Server doesn’t boot with XEN > > bsxsxen3:~ # uname -a > Linux bsxsxen3 4.4.82-6.9-default #1 SMP Tue Sep 19 06:38:15 UTC 2017 > (d4a2d80) x86\_64 x86\_64 x86\_64 GNU/Linux > > bsxsxen3:~ # cat /etc/os-release > NAME=“SLES” > VERSION=“12-SP3” > VERSION\_ID=“12.3” > PRETTY\_NAME=“SUSE Linux Enterprise Server 12 SP3” > ID=“sles” > ANSI\_COLOR=“0;32” > CPE\_NAME=“cpe:/o:suse:sles:12:sp3”[/color] > Do you have the AACRAID drivers from Microsemi (who now own the Adaptec > brand) installed? I’ve found [https://storage.microsemi.com/en-us/speed/raid/aac/linux/aacraid\_linux\_drivers\_v1.2.1-54013\_tgz.php](https://storage.microsemi.com/en-us/speed/raid/aac/linux/aacraid_linux_drivers_v1.2.1-54013_tgz.php) which includes a driver for SLES12 SP2 (although the included readme doesn’t reference this). ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 3, 2017, 6:03pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/5 "2017-10-03T18:03:40Z")
Hi The aacraid module is part of the kernel these days; ```auto /sbin/modinfo aacraid filename: /lib/modules/4.4.82-6.9-default/kernel/drivers/scsi/aacraid/aacraid.ko version: 1.2.1[50792]-custom license: GPL description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver ``` @OP: So it works with the old card, but not with the new card… sure the new card is OK? With the new card do you see the same BLKID/UUID information for dev-disk-by output with the new card? ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 3, 2017, 6:34pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/6 "2017-10-03T18:34:58Z")
Hi, yes SLES12 SP2 have a AACRAID drivers the last one downloaded from adaptec bsxsxen3:~ # rpm -qa | grep aac aacraid-ueficert-1.2.1-54013.x86\_64 aacraid-kmp-default-1.2.1\_k4.4.21\_69-54013.x86\_64 and Controller also have a newest Firmware Version to 33173 regards Amila ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 3, 2017, 7:22pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/7 "2017-10-03T19:22:13Z")
[QUOTE=gruner;39770]Hi, yes SLES12 SP2 have a AACRAID drivers the last one downloaded from adaptec bsxsxen3:~ # rpm -qa | grep aac aacraid-ueficert-1.2.1-54013.x86\_64 aacraid-kmp-default-1.2.1\_k4.4.21\_69-54013.x86\_64 and Controller also have a newest Firmware Version to 33173 regards Amila[/QUOTE] Hi That driver won’t work since it doesn’t match your running kernel (unless it’s rebuilt automatically), what is the output from the following; ```auto /sbin/modinfo aacraid ``` ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 3, 2017, 7:31pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/8 "2017-10-03T19:31:20Z")
Hi malcolmlewis we updated the server to the latest patches downloaded form th update channel last night. Current output of modinfo is # /sbin/modinfo aacraid filename: /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko version: 1.2.1.54013 thanks & regards ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 3, 2017, 7:42pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/9 "2017-10-03T19:42:38Z")
[QUOTE=gruner;39772]Hi malcolmlewis we updated the server to the latest patches downloaded form th update channel last night. Current output of modinfo is # /sbin/modinfo aacraid filename: /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko version: 1.2.1.54013 thanks & regards[/QUOTE] Hi So sitting in weak-updates, what about using the kernel module, what is the output from; ```auto /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko cat /etc/modprobe.d/10-unsupported-modules.conf ``` If you check the alias lines in the output from your existing module and the kernel module, do they match? Can you also see the controller in the output from (need to see the PCI ID information from the card); ```auto /sbin/lspci -nnk ``` ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 4, 2017, 12:44am UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/10 "2017-10-04T00:44:25Z")
Hi malcolmlewis default kernel module in the folder structure presents to the older aacraid version [COLOR=“#0000FF”]:~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko filename: /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko version: 1.2-1[41066]-ms[/COLOR] the kernel I’m using currently qithout XEN hypervisor functionality is [COLOR=“#0000FF”]:~ # /sbin/modinfo aacraid filename: /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko version: 1.2.1.54013 :~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko filename: /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko version: 1.2.1.54013 [/COLOR] wich points to [COLOR=“#0000FF”]:~ # ls -l /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko lrwxrwxrwx 1 root root 49 Oct 3 18:01 /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko → /lib/modules/4.4.21-69-default/updates/aacraid.ko [/COLOR] we didn’t configured anything in [COLOR=“#0000FF”]:~ # cat /etc/modprobe.d/10-unsupported-modules.conf # # Every kernel module has a flag ‘supported’. If this flag is not set loading # this module will taint your kernel. You will not get much help with a kernel # problem if your kernel is marked as tainted. In this case you firstly have # to avoid loading of unsupported modules. # # Setting allow\_unsupported\_modules 1 enables loading of unsupported modules # by modprobe, setting allow\_unsupported\_modules 0 disables it. This can # be overriden using the --allow-unsupported-modules commandline switch. allow\_unsupported\_modules 0[/COLOR] the default is alread active in Non-XEN mode [COLOR=“#0000FF”]:~ # cat /proc/sys/kernel/unsupported 2[/COLOR] the PCI Device ID shows correct information of the HBA controller card [COLOR=“#0000FF”]:~ # /sbin/lspci -nnk 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:bc11] … 03:00.0 RAID bus controller [0104]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01) Subsystem: Adaptec Series 8 - ASR-8805 - 8 internal 0 external 12G SAS Port/PCIe 3.0 [9005:0552] Kernel driver in use: aacraid Kernel modules: aacraid[/COLOR] The kernel 4.4.74-92.38 seems to use the ewer “weak-updates” HBA driver module (1.2.1.54013) on my system. There must be a different setting allowing this behavior. I expect the same booting in XEN mode because my grub configuration does not have special definitions for XEN or NonXEN mode. The other bad thing is: in XEN mode I have no way to access the console for additional debugging ;-( regards and optimistic dreams for tonight! ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 4, 2017, 1:26am UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/11 "2017-10-04T01:26:22Z")
Hi If you run the following against the in kernel driver and it returns a result (it does on SLES 12 SP3); ```auto /sbin/modinfo aacraid |grep 028D ``` I would suggest you run the in-kernel version as a test. Look at the logs again as I wonder if the new card creates new blk id’s for the device from this part on; ```auto Oct 02 14:00:45 bsxsxen3 kernel: aacraid: Host adapter abort request (1,0,5,0) ``` ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 4, 2017, 6:35pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/12 "2017-10-04T18:35:10Z")
Hi My server is running with SLES12 SP2 [COLOR="#0000FF"]:~ # cat /etc/os-release NAME=“SLES” VERSION=“12-SP2” VERSION\_ID=“12.2” PRETTY\_NAME=“SUSE Linux Enterprise Server 12 SP2”[/COLOR] IDs are [COLOR="#0000FF"] [CODE]:~ # /sbin/modinfo aacraid |grep 028D alias: pci:v00009005d0000028Dsv_sd_bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000028Dbc_sc_i\* :~ # /sbin/modinfo aacraid filename: /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko version: 1.2.1.54013 license: GPL description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver author: Red Hat Inc and Adaptec srcversion: BB56EBEF7F4C954F34BB64E alias: pci:v00009005d0000028Dsv_sd_bc_sc_i\* alias: pci:v00009005d0000028Csv_sd_bc_sc_i\* alias: pci:v00009005d0000028Bsv_sd_bc_sc_i\* alias: pci:v00009005d00000288sv_sd_bc_sc_i\* alias: pci:v00009005d00000286sv_sd_bc_sc_i\* alias: pci:v00009005d00000285sv_sd_bc_sc_i\* alias: pci:v00009005d00000285sv000017AAsd_bc_sc_i_ alias: pci:v00009005d00000285sv00001028sd_bc_sc_i_ alias: pci:v00001011d00000046sv0000103Csd000010C2bc_sc_i\* alias: pci:v00001011d00000046sv00009005sd00001364bc_sc_i\* alias: pci:v00001011d00000046sv00009005sd00000364bc_sc_i\* alias: pci:v00001011d00000046sv00009005sd00000365bc_sc_i\* alias: pci:v00009005d00000285sv00001028sd00000287bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd000002A2bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd0000029Abc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000299bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000298bc_sc_i\* alias: pci:v00009005d00000286sv00001014sd00009540bc_sc_i\* alias: pci:v00009005d00000286sv00001014sd00009580bc_sc_i\* alias: pci:v00009005d00000285sv00001014sd00000312bc_sc_i\* alias: pci:v00009005d00000285sv00001014sd000002F2bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000297bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000296bc_sc_i\* alias: pci:v00009005d00000285sv0000103Csd00003227bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000294bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000293bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000292bc_sc_i\* alias: pci:v00009005d00000285sv00001028sd00000291bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000290bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd0000028Fbc_sc_i\* alias: pci:v00009005d00000285sv00009005sd0000028Ebc_sc_i\* alias: pci:v00009005d00000286sv00009005sd00000800bc_sc_i\* alias: pci:v00009005d00000200sv00009005sd00000200bc_sc_i\* alias: pci:v00009005d00000287sv00009005sd00000800bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd000002A6bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd000002A5bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd000002A4bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd000002A3bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd000002A1bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd000002A0bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000029Fbc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000029Ebc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000029Dbc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000029Cbc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000029Bbc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000028Dbc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000028Cbc_sc_i\* alias: pci:v00009005d00000285sv00009005sd0000028Bbc_sc_i\* alias: pci:v00009005d00000285sv00009005sd0000028Abc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000289bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000288bc_sc_i\* alias: pci:v00009005d00000285sv000017AAsd00000287bc_sc_i\* alias: pci:v00009005d00000285sv000017AAsd00000286bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000287bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000285bc_sc_i\* alias: pci:v00009005d00000285sv00009005sd00000286bc_sc_i\* alias: pci:v00009005d00000284sv00009005sd00000284bc_sc_i\* alias: pci:v00009005d00000283sv00009005sd00000283bc_sc_i\* alias: pci:v00001028d0000000Asv00001028sd00000121bc_sc_i\* alias: pci:v00001028d0000000Asv00001028sd0000011Bbc_sc_i\* alias: pci:v00001028d0000000Asv00001028sd00000106bc_sc_i\* alias: pci:v00001028d00000002sv00001028sd000000D9bc_sc_i\* alias: pci:v00001028d00000002sv00001028sd000000D1bc_sc_i\* alias: pci:v00001028d00000004sv00001028sd000000D0bc_sc_i\* alias: pci:v00001028d00000003sv00001028sd00000003bc_sc_i\* alias: pci:v00001028d00000002sv00001028sd00000002bc_sc_i\* alias: pci:v00001028d00000001sv00001028sd00000001bc_sc_i\* depends: scsi\_mod,scsi\_transport\_sas supported: external vermagic: 4.4.21-69-default SMP mod\_unload modversions parm: firmware\_debug:Enable Firmware print debugging. 0=off 1=print to adapter diagnostic (default) 2=print to syslog 3=adapter diagnostic to syslog (unsupported) (int) parm: nondasd:Control scanning of hba for nondasd devices. 0=off, 1=on (int) parm: cache:Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE\_CACHE SCSI command bit 2 - Disable only if Battery is protecting Cache (int) parm: dacmode:Control whether dma addressing is using 64 bit DAC. 0=off, 1=on (int) parm: aac\_sync\_mode:Force sync. transfer mode 0=off, 1=on (int) parm: aac\_convert\_sgl:Convert non-conformable s/g list 0=off, 1=on (int) parm: aac\_hba\_mode:HBA (bypass) mode support 0=off, 1=on (int) parm: commit:Control whether a COMMIT\_CONFIG is issued to the adapter for foreign arrays. This is typically needed in systems that do not have a BIOS. 0=off, 1=on (int) parm: msi:IRQ handling. 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI) (int) parm: startup\_timeout:The duration of time in seconds to wait for adapter to have it’s kernel up and running. This is typically adjusted for large systems that do not have a BIOS. (int) parm: aif\_timeout:The duration of time in seconds to wait for applications to pick up AIFs before deregistering them. This is typically adjusted for heavily burdened systems. (int) parm: aac\_fib\_dump:Dump controller fibs prior to IOP\_RESET 0=off, 1=on (int) parm: coalescethreshold:Control the maximum block size of sequential requests that are fed back to the scsi\_merge layer for coalescing. 0=off, 16 block (8KB) default. (int) parm: numacb:Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware. (int) parm: aac\_remove\_devnodes:Remove device nodes(/dev/sd\* and /dev/sg\*) permanently when the device goes to offline state. 0=off, 1=on(Default). (int) parm: update\_interval:Interval in seconds between time sync updates issued to adapter. (int) parm: check\_interval:Interval in seconds between adapter health checks. (int) parm: check\_reset:If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it. (int) parm: expose\_physicals:Expose physical components of the arrays. -1=protect 0=off, 1=on (int) parm: expose\_hidden\_space:Expose hidden space of the Array. -1=protect 0=off, 1=on (int) parm: reset\_devices:Force an adapter reset at initialization. (int) parm: disc\_delay:Delay for x sec before presenting devices (int) parm: wwn:Select a WWN type for the arrays: 0 - Disable 1 - Array Meta Data Signature (default) 2 - Adapter Serial Number (int)[/CODE] [/COLOR] ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 4, 2017, 9:13pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/13 "2017-10-04T21:13:51Z")
Hi Apologies, this one; ```auto /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko |grep 028D ``` If it is shown, delete the installed rpms and re-boot, but first keep a copy of the output from the blkid command and then compare the logs to see if they change with the new card… ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [October 4, 2017, 11:12pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/14 "2017-10-04T23:12:30Z")
Hi both kernel modules are showing the same IDs `:~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko |grep -e 028D -e ^version version: 1.2.1.54013 alias: pci:v00009005d0000028Dsv*sd*bc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i* :~ # /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko |grep -e 028D -e ^version version: 1.2-1[41066]-ms alias: pci:v00009005d0000028Dsv*sd*bc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i* ` it seem’s to be fine. Isn’t it? `:~ # /sbin/lspci -nnk 03:00.0 RAID bus controller [0104]: Adaptec Series 8 12G SAS/PCIe 3 [9005:[COLOR="#0000FF"]028d[/COLOR]] (rev 01) Subsystem: Adaptec Series 8 - ASR-8805 - 8 internal 0 external 12G SAS Port/PCIe 3.0 [9005:0552] Kernel driver in use: aacraid Kernel modules: aacraid ` ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [October 5, 2017, 12:04am UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/15 "2017-10-05T00:04:00Z")
> [@](#): > > On Wed 04 Oct 2017 08:14:02 PM CDT, gruner wrote: > > Hi > > both kernel modules are showing the same IDs > > ## Code: > > :~ > > # /sbin/modinfo /lib/modules/4.4.74-92.38-default/weak-updates/updates/aacraid.ko > > |grep -e 028D -e ^version version: 1.2.1.54013 alias: > pci:v00009005d0000028Dsv_sd_bc_sc_i\* alias: > pci:v00009005d00000286sv00009005sd0000028Dbc_sc_i\* :~ > > # /sbin/modinfo /lib/modules/4.4.74-92.38-default/kernel/drivers/scsi/aacraid/aacraid.ko > > ## |grep -e 028D -e ^version version: 1.2-1[41066]-ms alias: pci:v00009005d0000028Dsv_sd_bc_sc_i\* alias: pci:v00009005d00000286sv00009005sd0000028Dbc_sc_i\* > > it seem’s to be fine. Isn’t it? Hi Yes and no, since it’s in weak-updates it may have issues with the running kernel. As a test remove the rpm’s and see how you go with the in-kernel supported driver rather than the vendor supplied one. – Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) openSUSE Leap 42.2|GNOME 3.20.2|4.4.87-18.29-default If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below… Thanks! ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [November 9, 2017, 1:18pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/16 "2017-11-09T13:18:27Z")
Hi, Microsemi bring a new driver version on 17. of october, (AACRAID Drivers 1.2.1-55022 for Linux) so even with this driver I can not get my SLES12SP2 with 8805 Controller running with XEN hypervisor! Till now no Ideea what can I do? Just now I have SLES12SP2 Installd with latests kernel version and with in-kernel supported driver # uname -a Linux bsxsxen3 4.4.90-92.45-default #1 SMP Tue Oct 24 15:03:15 UTC 2017 (1094ae5) x86\_64 x86\_64 x86\_64 GNU/Linux # find / -name aacraid.ko /lib/modules/4.4.59-92.17-default/kernel/drivers/scsi/aacraid/aacraid.ko /lib/modules/4.4.90-92.45-default/kernel/drivers/scsi/aacraid/aacraid.ko If I install SLES12SP2 with 6805 Adaptec Controller XEN hypervisor works without any Problem. (on same Hardware!) Any Idee what I can do? Thanks ---
**Author:** ![gruner](https://avatars.discourse-cdn.com/v4/letter/g/c5a1d2/32.png) [@gruner](https://forums.suse.com/u/gruner)\ **Post date:** [April 18, 2018, 4:46pm UTC](https://forums.suse.com/t/sles12-sp2-doesnt-start-with-xen-hypervisor/30401/17 "2018-04-18T16:46:26Z")
Hi again, Did anybody has SLES 12 SP3 - XEN running with Adaptec RAID 8805 Controller??? I open my Call by SUSE last year November 2017!! Till now I got 2 Patches, both doesn’t work and till now no solution!!! Microsemi bring today a new driver version aacraid\_linux\_drivers\_v1.2.1-56008 but also it doesn’t solve my Problem!! SLES12 SP3 doesn’t start with XEN hypervisor Please , did somebody have any Idea what I can do??? Thanks Amila # rpm -qa | grep aac aacraid-kmp-default-1.2.1\_k4.4.73\_5-56008.x86\_64 aacraid-ueficert-1.2.1-56008.x86\_64 # find / -name aacraid.ko /lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/kernel/drivers/scsi/aacraid/aacraid.ko /lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/weak-updates/updates/aacraid.ko /lib/modules/4.4.73-5-default/updates/aacraid.ko /lib/modules/4.4.120-94.17-default/kernel/drivers/scsi/aacraid/aacraid.ko /lib/modules/4.4.120-94.17-default/weak-updates/updates/aacraid.ko /var/tmp/dracut.mg8VKm/initramfs/lib/modules/4.4.114-94.14.1.15007.1.TEST.1049087-default/kernel/drivers/scsi/aacraid/aacraid.ko # uname -a Linux bsxsxen3 4.4.120-94.17-default #1 SMP Wed Mar 14 17:23:00 UTC 2018 (cf3a7bb) x86\_64 x86\_64 x86\_64 GNU/Linux