# SM3 Enable Configuration Management **URL:** \ **Category:** SUSE Multi Linux Manager\ **Created:** [May 3, 2017, 12:29pm UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745 "2017-05-03T12:29:12Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![LIS\_Internet\_Securit](https://avatars.discourse-cdn.com/v4/letter/l/c0e974/32.png) [@LIS\_Internet\_Securit](https://forums.suse.com/u/LIS_Internet_Securit)\ **Post date:** [May 3, 2017, 12:29pm UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745/1 "2017-05-03T12:29:12Z")
Hi i’m trying the SM3. I like to make a System, shown in Target Systems, to a Managed System. The rhncfg\* Package is installed at the Client. I marked the System and clicked “enable SUSE Manager Configuration Management”. The sate is green, no Error. Then i go to the System (a SLES12.2) and try to run rhn\_check local. but rhn\_check is not found. rhncfg rhncfg-actions rhncfg-client rhncfg-Management are installed on the System. Where can i find the rhn\_check? Best regards Helga ---
**Author:** ![Automatic\_Reply](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Automatic\_Reply](https://forums.suse.com/u/Automatic_Reply)\ **Post date:** [May 8, 2017, 7:30am UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745/2 "2017-05-08T07:30:16Z")
LIS, It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply. These forums are peer-to-peer, best effort, volunteer run and that if your issue is urgent or not getting a response, you might try one of the following options: - Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all the other support options available. - Open a service request: [https://www.suse.com/support](https://www.suse.com/support) - You could also try posting your message again. Make sure it is posted in the correct newsgroup. ([http://forums.suse.com](http://forums.suse.com)) Be sure to read the forum FAQ about what to expect in the way of responses: [http://forums.suse.com/faq.php](http://forums.suse.com/faq.php) If this is a reply to a duplicate posting or otherwise posted in error, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot… Good luck! Your SUSE Forums Team [http://forums.suse.com](http://forums.suse.com) ---
**Author:** ![LIS\_Internet\_Securit](https://avatars.discourse-cdn.com/v4/letter/l/c0e974/32.png) [@LIS\_Internet\_Securit](https://forums.suse.com/u/LIS_Internet_Securit)\ **Post date:** [May 22, 2017, 11:19am UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745/3 "2017-05-22T11:19:31Z")
[QUOTE=LIS\_Internet\_Security;37697]Hi i’m trying the SM3. I like to make a System, shown in Target Systems, to a Managed System. The rhncfg\* Package is installed at the Client. I marked the System and clicked “enable SUSE Manager Configuration Management”. The sate is green, no Error. Then i go to the System (a SLES12.2) and try to run rhn\_check local. but rhn\_check is not found. rhncfg rhncfg-actions rhncfg-client rhncfg-Management are installed on the System. Where can i find the rhn\_check? Best regards Helga[/QUOTE] For all with the same problem like me: > 1. rhn\_check wird im “alten” spacewalk Kommunikationsstack verwendet. > 2. Das was in der Web UI vom SUSE unter “Configuration Management” zu > finden ist, basiert auf dem “alten” spacewalk Kommunikationsstack und > kann nicht mit Salt angebundenen Clients verwendet werden. Best regards Helga ---
**Author:** ![Jens-U](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jens-U](https://forums.suse.com/u/Jens-U)\ **Post date:** [May 30, 2017, 7:04pm UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745/4 "2017-05-30T19:04:04Z")
Hi Helga, thank you for sharing your problem resolution. For the sake of our international readers: [QUOTE=LIS\_Internet\_Security;37935]For all with the same problem like me: > 1. rhn\_check wird im “alten” spacewalk Kommunikationsstack verwendet. > 2. Das was in der Web UI vom SUSE unter “Configuration Management” zu > finden ist, basiert auf dem “alten” spacewalk Kommunikationsstack und > kann nicht mit Salt angebundenen Clients verwendet werden. > [/QUOTE] 1. rhn\_check is part of the “old” spacewalk communications stack 2. what’s shown under “Configuration Management” (within the SUSE Manager UI) applies to the “old” spacewalk stack and cannot be used in conjunction with clients configured to use Salt. Regards, J ---
**Author:** ![kotara\_consultant](https://avatars.discourse-cdn.com/v4/letter/k/35a633/32.png) [@kotara\_consultant](https://forums.suse.com/u/kotara_consultant)\ **Post date:** [August 15, 2017, 5:12am UTC](https://forums.suse.com/t/sm3-enable-configuration-management/29745/5 "2017-08-15T05:12:17Z")
[QUOTE=jmozdzen;38047]Hi Helga, thank you for sharing your problem resolution. For the sake of our international readers: 1. rhn\_check is part of the “old” spacewalk communications stack 2. what’s shown under “Configuration Management” (within the SUSE Manager UI) applies to the “old” spacewalk stack and cannot be used in conjunction with clients configured to use Salt. Regards, J[/QUOTE] I have the exact same problem So you cannot use configuration management with the salt client through the Suse Manager UI?