# Snapper config

**URL:** <https://forums.suse.com/t/snapper-config/34574>\
**Category:** SLED Configure-Administer\
**Created:** [November 25, 2019, 12:14am UTC](https://forums.suse.com/t/snapper-config/34574 "2019-11-25T00:14:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hcp\_dk](https://avatars.discourse-cdn.com/v4/letter/h/74df32/32.png) [@hcp\_dk](https://forums.suse.com/u/hcp_dk)\
**Post date:** [November 25, 2019, 12:14am UTC](https://forums.suse.com/t/snapper-config/34574/1 "2019-11-25T00:14:50Z")

</div>

I’m reading a German Linux magzin an try and check in the system. By that, Snapper informed me to be out of order since a configuration is missing.  
The man-snapper is not the great help

How can I get the sanpper configured to work again?

---

<div class="post-metadata">

**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\
**Post date:** [November 25, 2019, 5:12am UTC](https://forums.suse.com/t/snapper-config/34574/2 "2019-11-25T05:12:20Z")

</div>

Hi  
Just to confirm your running btrfs for / ?

This should get you going;

```auto
snapper -c root create-config /
```

Read here: [https://documentation.suse.com/sles/15-SP1/html/SLES-all/cha-snapper.html#sec-snapper-setup](https://documentation.suse.com/sles/15-SP1/html/SLES-all/cha-snapper.html#sec-snapper-setup)