# SUSE access to Server (NAS) **URL:** \ **Category:** General Discussion\ **Created:** [April 8, 2021, 7:10am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545 "2021-04-08T07:10:02Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 8, 2021, 7:10am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/1 "2021-04-08T07:10:02Z")
following **setup** : 3 computer with SUSE SLED 15.2 2 Laptop with Windows 10 NAS Sever Sznology with DSM. DSM is Linux, but an special and in fact very comfortable version of Linux The server runs NFS, but not NIS. We use AD network that is supported by Windows and Linux as well. DHCP server comes from a Cisco Firewall **Problem** : Windows can see the see the server. Linux, wen you klick on _windows network_ - Unable to access location, Failed to retrieve share listr from Server: No such file or directory. SAMBA has been setup UserLogon setup But Computer name is not resolvable. I can add network drives - but only via IP adress (same for printer), but both via SMB or NFS. SUSE Service had checked it, tried a lot, we made a complete fresh and virgin installation - couldn’t find a solution. It has been reported as bug - but SUSE can’t find a bug, closed the case Question: What goes wrong here. ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [April 8, 2021, 12:43pm UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/2 "2021-04-08T12:43:11Z")
@HANS-CHRISTOPH Hi, likely the SMB version on the NAS, which is? If you try logging in from the command line on the linux guest and run `smbclient -d 3 -L ///` does it show errors? ---
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 12, 2021, 7:40am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/3 "2021-04-12T07:40:46Z")
Hi Malcom, sorry for late reply - was somehow busy. You are really good - always answering. However, i talked with SUSE developer - are German as well 🙂 - and told them only those responses for failure make the system better. Microsoft do that by pulling Metadata - we need to do in different ways. But, SUSE got better - much better - compared to version 11. The NAS runs both SMB 2 and 3 and large MTU. The detailed version I couldn’t find. `SLED15Desktop:/home/hans-christoph # smbclient -d 3 -L //10.0.25.3/` Enter HCPIN\hans-christoph’s password: GENSEC backend ‘gssapi\_spnego’ registered GENSEC backend ‘gssapi\_krb5’ registered GENSEC backend ‘gssapi\_krb5\_sasl’ registered GENSEC backend ‘spnego’ registered GENSEC backend ‘schannel’ registered GENSEC backend ‘naclrpc\_as\_system’ registered GENSEC backend ‘sasl-EXTERNAL’ registered GENSEC backend ‘ntlmssp’ registered GENSEC backend ‘ntlmssp\_resume\_ccache’ registered GENSEC backend ‘http\_basic’ registered GENSEC backend ‘http\_ntlm’ registered GENSEC backend ‘http\_negotiate’ registered Cannot do GSE to an IP address Got challenge flags: Got NTLMSSP neg\_flags=0x62898215 NTLMSSP: Set final flags: Got NTLMSSP neg\_flags=0x62088215 NTLMSSP Sign/Seal - Initialising with flags: Got NTLMSSP neg\_flags=0x62088215 NTLMSSP Sign/Seal - Initialising with flags: Got NTLMSSP neg\_flags=0x62088215 ``` Sharename Type Comment --------- ---- ------- netlogon Disk sysvol Disk ActiveBackupforBusiness Disk drive_h Disk drive_i Disk drive_p Disk drive_x Disk homes Disk user home music Disk System default shared folder photo Disk System default shared folder usbshare1 Disk Western Digital Technologies, Inc. Users Disk video Disk System default shared folder IPC$ IPC IPC Service () dell_3100cn Printer Dell Laser Printer 3100cn hp_laserjet_700 Printer Hewlett-Packard HP LaserJet 700 color MFP M775 SMB1 disabled -- no workgroup available We do not use SMB1 since 2 and 3 are more safe. ``` ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [April 12, 2021, 4:12pm UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/4 "2021-04-12T16:12:25Z")
@HANS-CHRISTOPH Hi, so looks like just a netbios naming issue, I’m not a samba user, just use sftp/scp etc 😉 Have a read here: [https://documentation.suse.com/sles/15-SP2/html/SLES-all/cha-samba.html](https://documentation.suse.com/sles/15-SP2/html/SLES-all/cha-samba.html) and suggest a google of `samba+Troubleshooting NetBIOS names` ---
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 15, 2021, 10:50am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/5 "2021-04-15T10:50:24Z")
ok, thanks. I’ll check up. But is netbios not an very old protocol? ---
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 16, 2021, 11:55am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/6 "2021-04-16T11:55:39Z")
I get this result: SLED15Desktop:/etc/samba # net ads join -U Administrator -S HCPIN Enter Administrator’s password: Failed to join domain: failed to lookup DC info for domain ‘HCPI.HQ’ over rpc: {Operation Failed} The requested operation was unsuccessful. ---
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 16, 2021, 11:59am UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/7 "2021-04-16T11:59:59Z")
I placed many screenshots here - not sure they are visible? ---
**Author:** ![malcolmlewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/malcolmlewis/32/11375_2.png) [@malcolmlewis](https://forums.suse.com/u/malcolmlewis)\ **Post date:** [April 16, 2021, 12:31pm UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/8 "2021-04-16T12:31:38Z")
@HANS-CHRISTOPH Hi is the firewall running, if so stop temporarily and test. ---
**Author:** ![HANS-CHRISTOPH](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@HANS-CHRISTOPH](https://forums.suse.com/u/HANS-CHRISTOPH)\ **Post date:** [April 16, 2021, 7:18pm UTC](https://forums.suse.com/t/suse-access-to-server-nas/35545/9 "2021-04-16T19:18:52Z")
The PC I tested is in internal zone. All ports should be open?