# SUSE boot from PowerPC Power6 using HMC

**URL:** <https://forums.suse.com/t/suse-boot-from-powerpc-power6-using-hmc/29165>\
**Category:** SLES for POWER\
**Created:** [December 27, 2016, 8:40am UTC](https://forums.suse.com/t/suse-boot-from-powerpc-power6-using-hmc/29165 "2016-12-27T08:40:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![redhuan](https://avatars.discourse-cdn.com/v4/letter/r/f6c823/32.png) [@redhuan](https://forums.suse.com/u/redhuan)\
**Post date:** [December 27, 2016, 8:40am UTC](https://forums.suse.com/t/suse-boot-from-powerpc-power6-using-hmc/29165/1 "2016-12-27T08:40:27Z")

</div>

Hi All

Everyone can tell me, can i boot SUSE linux 12 from power 6 server using LPARs that managed from HMC server? Thank you.

---

<div class="post-metadata">

**Author:** ![Automatic\_Reply](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Automatic\_Reply](https://forums.suse.com/u/Automatic_Reply)\
**Post date:** [January 2, 2017, 7:30am UTC](https://forums.suse.com/t/suse-boot-from-powerpc-power6-using-hmc/29165/2 "2017-01-02T07:30:33Z")

</div>

redhuan,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

These forums are peer-to-peer, best effort, volunteer run and that if your issue  
is urgent or not getting a response, you might try one of the following options:

- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all  
the other support options available.
- Open a service request: [https://www.suse.com/support](https://www.suse.com/support)
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)

If this is a reply to a duplicate posting or otherwise posted in error, please  
ignore and accept our apologies and rest assured we will issue a stern reprimand  
to our posting bot…

Good luck!

Your SUSE Forums Team  
[http://forums.suse.com](http://forums.suse.com)

---

<div class="post-metadata">

**Author:** ![isgleas](https://avatars.discourse-cdn.com/v4/letter/i/e56c9b/32.png) [@isgleas](https://forums.suse.com/u/isgleas)\
**Post date:** [January 11, 2017, 8:34pm UTC](https://forums.suse.com/t/suse-boot-from-powerpc-power6-using-hmc/29165/3 "2017-01-11T20:34:25Z")

</div>

Hi redhuan

I’m afraid not. SLES12 will work on Little Endian Power systems (Power 8), not on Big Endian ones (Power 6, Power 7 if I recall correctly). On Power 6, you should be able to run SLES11,

Likewise, you cannot run SLES11 on Power 8 systems,

Hope this helps
