# Suse cloud and pacemaker problem **URL:** \ **Category:** SUSE OpenStack Cloud\ **Created:** [December 12, 2016, 7:34am UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111 "2016-12-12T07:34:03Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![naukasuse12](https://avatars.discourse-cdn.com/v4/letter/n/b19c9b/32.png) [@naukasuse12](https://forums.suse.com/u/naukasuse12)\ **Post date:** [December 12, 2016, 7:34am UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111/1 "2016-12-12T07:34:03Z")
Hi I installed admin node with Ha extension pack. I got single mode card , connection to internet via bastion.I got everything updated via smt. So when i want cluster i got many errors and cluster is not set up. I must first deploy full suse cloud to set up clusters or i must do it from admin node before i installed suse cloud ? i watched this [https://www.youtube.com/watch?v=OrsiP86rGM8](https://www.youtube.com/watch?v=OrsiP86rGM8) but it will not work with my configuration. my setup is all nodes are in virtualbox 2 cards one with 192.168.124.10 static ip Add host only second it is bridge adapter also with static ip any suggestion what i need to do ? ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [December 14, 2016, 1:18am UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111/2 "2016-12-14T01:18:28Z")
naukasuse12 Wrote in message: [color=blue] > I installed admin node with Ha extension pack. I got single mode card , > connection to internet via bastion.I got everything updated via smt. So > when i want cluster i got many errors and cluster is not set up. > I must first deploy full suse cloud to set up clusters or i must do it > from admin node before i installed suse cloud ? > > i watched this [https://www.youtube.com/watch?v=OrsiP86rGM8](https://www.youtube.com/watch?v=OrsiP86rGM8) but it will > not work with my configuration. > > my setup is > all nodes are in virtualbox > 2 cards > > one with 192.168.124.10 static ip Add host only > second it is bridge adapter also with static ip > > any suggestion what i need to do ?[/color] With SUSE OpenStack Cloud you first have to install the Admin server then you deploy your OpenStack nodes from that. This includes Pacemaker if you want HA. For HA you need at least two Control nodes[1] although it is possible to use HA with Compute nodes[2]. HTH. ## [1] [https://www.suse.com/documentation/suse-openstack-cloud-6/book](https://www.suse.com/documentation/suse-openstack-cloud-6/book) \_cloud\_deploy/data/sec\_depl\_ostack\_pacemaker.html [2] [https://susecon2016.smarteventscloud.com/connect/sessionDetail](https://susecon2016.smarteventscloud.com/connect/sessionDetail) ..ww?SESSION\_ID=91445 Simon Flood SUSE Knowledge Partner ----Android NewsGroup Reader---- [http://usenet.sinaapp.com/](http://usenet.sinaapp.com/) ---
**Author:** ![naukasuse12](https://avatars.discourse-cdn.com/v4/letter/n/b19c9b/32.png) [@naukasuse12](https://forums.suse.com/u/naukasuse12)\ **Post date:** [December 14, 2016, 1:57am UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111/3 "2016-12-14T01:57:49Z")
[QUOTE=smflood;35716]naukasuse12 Wrote in message: [color=blue] > I installed admin node with Ha extension pack. I got single mode card , > connection to internet via bastion.I got everything updated via smt. So > when i want cluster i got many errors and cluster is not set up. > I must first deploy full suse cloud to set up clusters or i must do it > from admin node before i installed suse cloud ? > > i watched this [https://www.youtube.com/watch?v=OrsiP86rGM8](https://www.youtube.com/watch?v=OrsiP86rGM8) but it will > not work with my configuration. > > my setup is > all nodes are in virtualbox > 2 cards > > one with 192.168.124.10 static ip Add host only > second it is bridge adapter also with static ip > > any suggestion what i need to do ?[/color] With SUSE OpenStack Cloud you first have to install the Admin server then you deploy your OpenStack nodes from that. This includes Pacemaker if you want HA. For HA you need at least two Control nodes[1] although it is possible to use HA with Compute nodes[2]. HTH. ## [1] [https://www.suse.com/documentation/suse-openstack-cloud-6/book](https://www.suse.com/documentation/suse-openstack-cloud-6/book) \_cloud\_deploy/data/sec\_depl\_ostack\_pacemaker.html [2] [https://susecon2016.smarteventscloud.com/connect/sessionDetail](https://susecon2016.smarteventscloud.com/connect/sessionDetail) ..ww?SESSION\_ID=91445 Simon Flood SUSE Knowledge Partner ----Android NewsGroup Reader---- [http://usenet.sinaapp.com/](http://usenet.sinaapp.com/)[/QUOTE] thanks for reply i got 2 control node now and 2 compute node i planing set up sbd so : i have one question i set up sdb via this command sbd -d /dev/sda3/ -4 180 -1 90 create i see dump so now i must set up patch to my crowbar installation but where is a id ? I mean now i must use this command /dev/disk/by-id/DEVICE so it should look like that -\>\> /dev/sda3/my-id/sda3 ? id is a uuid? or i can just write 1 instead empty place and it will be my id ? i can’t open links ---
**Author:** ![smflood](https://sea2.discourse-cdn.com/flex022/user_avatar/forums.suse.com/smflood/32/10576_2.png) [@smflood](https://forums.suse.com/u/smflood)\ **Post date:** [December 16, 2016, 4:26pm UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111/4 "2016-12-16T16:26:12Z")
On 14/12/16 00:04, naukasuse12 wrote: [color=blue] > thanks for reply i got 2 control node now and 2 compute node i planing > set up sbd so : i have one question i set up sdb via this command sbd > -d /dev/sda3/ -4 180 -1 90 create > > i see dump > so now i must set up patch to my crowbar installation but where is a id > ? I mean now i must use this command > /dev/disk/by-id/DEVICE so it should look like that -\>\> > /dev/sda3/my-id/sda3 ? > id is a uuid? or i can just write 1 instead empty place and it will be > my id ?[/color] When creating and editing the Pacemaker proposal which Configuration mode for STONITH are you selecting? [color=blue] > i can’t open links[/color] Sorry but I don’t understand this comment - which links? ## HTH. Simon SUSE Knowledge Partner * * * ## If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ---
**Author:** ![naukasuse12](https://avatars.discourse-cdn.com/v4/letter/n/b19c9b/32.png) [@naukasuse12](https://forums.suse.com/u/naukasuse12)\ **Post date:** [December 16, 2016, 8:29pm UTC](https://forums.suse.com/t/suse-cloud-and-pacemaker-problem/29111/5 "2016-12-16T20:29:11Z")
[QUOTE=smflood;35754]On 14/12/16 00:04, naukasuse12 wrote: [color=blue] > thanks for reply i got 2 control node now and 2 compute node i planing > set up sbd so : i have one question i set up sdb via this command sbd > -d /dev/sda3/ -4 180 -1 90 create > > i see dump > so now i must set up patch to my crowbar installation but where is a id > ? I mean now i must use this command > /dev/disk/by-id/DEVICE so it should look like that -\>\> > /dev/sda3/my-id/sda3 ? > id is a uuid? or i can just write 1 instead empty place and it will be > my id ?[/color] When creating and editing the Pacemaker proposal which Configuration mode for STONITH are you selecting? [color=blue] > i can’t open links[/color] Sorry but I don’t understand this comment - which links? ## HTH. Simon SUSE Knowledge Partner * * * If you find this post helpful and are logged into the web interface, please show your appreciation and click on the star below. Thanks. ------------------------------------------------------------------------[/QUOTE] those links : [1] [https://www.suse.com/documentation/s…k-cloud-6/book](https://www.suse.com/documentation/s...k-cloud-6/book) \_cloud\_deploy/data/sec\_depl\_ostack\_pacemaker.html [2] [https://susecon2016.smarteventscloud…/sessionDetail](https://susecon2016.smarteventscloud) ..ww?SESSION\_ID=91445 Also in pacemaker set this mode " Configured STONITH Block devices (SBD)