# Wacom Intuos Pen & Touch

**URL:** <https://forums.suse.com/t/wacom-intuos-pen-touch/26567>\
**Category:** SLED Hardware\
**Created:** [January 14, 2015, 10:55am UTC](https://forums.suse.com/t/wacom-intuos-pen-touch/26567 "2015-01-14T10:55:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![crashd22](https://avatars.discourse-cdn.com/v4/letter/c/5fc32e/32.png) [@crashd22](https://forums.suse.com/u/crashd22)\
**Post date:** [January 14, 2015, 10:55am UTC](https://forums.suse.com/t/wacom-intuos-pen-touch/26567/1 "2015-01-14T10:55:29Z")

</div>

Hi there,

I replaced an old Wacom Intuos 3 tablet with a new Intuos Pen & Touch (CTH-680). It didn’t work out of the box and it seemed that I need to update input-wacom so built the kernel module from source. The device definitely gets recognised as I end up with /dev/input/wacom and wacom-touch, it appears in lsusb but I can’t for the life of me get the tablet to actually work in X. ‘wacdump’ doesn’t seem to see any input on it, nor does xidump.

Wondering if anyone had any insight or bright ideas?

Thanks,  
Dave

---

<div class="post-metadata">

**Author:** ![mikewillis](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@mikewillis](https://forums.suse.com/u/mikewillis)\
**Post date:** [January 14, 2015, 11:48am UTC](https://forums.suse.com/t/wacom-intuos-pen-touch/26567/2 "2015-01-14T11:48:31Z")

</div>

[QUOTE=crashd22;25797]Hi there,

I replaced an old Wacom Intuos 3 tablet with a new Intuos Pen & Touch (CTH-680). It didn’t work out of the box and it seemed that I need to update input-wacom so built the kernel module from source. The device definitely gets recognised as I end up with /dev/input/wacom and wacom-touch, it appears in lsusb but I can’t for the life of me get the tablet to actually work in X. ‘wacdump’ doesn’t seem to see any input on it, nor does xidump.

Wondering if anyone had any insight or bright ideas?  
[/QUOTE]

I’ve no insight or bright ideas myself at the moment as I’ve never used a Wacom tablet, but it will greatly help people help you if you say which version of SLED you are using. There are two currently supported versions, SLED 11 SP3 and SLED 12, which are very different to each other. Can you post the output of

`$ cat /etc/*release*
$ lsusb`

You mention you’ve built a kernel module from source, where did that source come from?

---

<div class="post-metadata">

**Author:** ![crashd22](https://avatars.discourse-cdn.com/v4/letter/c/5fc32e/32.png) [@crashd22](https://forums.suse.com/u/crashd22)\
**Post date:** [January 14, 2015, 12:30pm UTC](https://forums.suse.com/t/wacom-intuos-pen-touch/26567/3 "2015-01-14T12:30:14Z")

</div>

Thanks mikewillis, sorry i’m being a bit hair-brained today.

Module was built from source from linuxwacom project.

[http://sourceforge.net/projects/linuxwacom/files/xf86-input-wacom/input-wacom/input-wacom-0.26.0.tar.bz2/download](http://sourceforge.net/projects/linuxwacom/files/xf86-input-wacom/input-wacom/input-wacom-0.26.0.tar.bz2/download)

mistika:~ # cat /etc/_release_  
SUSE Linux Enterprise Desktop 11 (x86\_64)  
VERSION = 11  
PATCHLEVEL = 3  
SUSE Linux Enterprise Desktop 11 (x86\_64)  
VERSION = 11  
PATCHLEVEL = 3

> [@](#):
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub  
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Bus 001 Device 002: ID 21d1:000a  
> Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub  
> Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub  
> Bus 001 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard  
> Bus 001 Device 004: ID 056a:0303 Wacom Co., Ltd  
> Bus 001 Device 005: ID 21d1:000b  
> Bus 004 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
> 
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 1 Single TT  
> bMaxPacketSize0 64  
> idVendor 0x1d6b Linux Foundation  
> idProduct 0x0002 2.0 root hub  
> bcdDevice 3.00  
> iManufacturer 3 Linux 3.0.76-0.11-default xhci\_hcd  
> iProduct 2 xHCI Host Controller  
> iSerial 1 0000:08:00.0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0004 1x 4 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 9  
> bDescriptorType 41  
> nNbrPorts 4  
> wHubCharacteristic 0x0009  
> Per-port power switching  
> Per-port overcurrent protection  
> TT think time 8 FS bits  
> bPwrOn2PwrGood 10 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00  
> PortPwrCtrlMask 0xff  
> Hub Port Status:  
> Port 1: 0000.0503 highspeed power enable connect  
> Port 2: 0000.0100 power  
> Port 3: 0000.0100 power  
> Port 4: 0000.0100 power  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 3.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 3  
> bMaxPacketSize0 9  
> idVendor 0x1d6b Linux Foundation  
> idProduct 0x0003 3.0 root hub  
> bcdDevice 3.00  
> iManufacturer 3 Linux 3.0.76-0.11-default xhci\_hcd  
> iProduct 2 xHCI Host Controller  
> iSerial 1 0000:08:00.0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 31  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0004 1x 4 bytes  
> bInterval 12  
> bMaxBurst 0  
> Hub Descriptor:  
> bLength 12  
> bDescriptorType 42  
> nNbrPorts 4  
> wHubCharacteristic 0x0009  
> Per-port power switching  
> Per-port overcurrent protection  
> bPwrOn2PwrGood 10 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> bHubDecLat 0.0 micro seconds  
> wHubDelay 0 nano seconds  
> DeviceRemovable 0x00  
> Hub Port Status:  
> Port 1: 0000.02a0 5Gbps power Rx.Detect  
> Port 2: 0000.02a0 5Gbps power Rx.Detect  
> Port 3: 0000.02a0 5Gbps power Rx.Detect  
> Port 4: 0000.02a0 5Gbps power Rx.Detect  
> Binary Object Store Descriptor:  
> bLength 5  
> bDescriptorType 15  
> wTotalLength 15  
> bNumDeviceCaps 1  
> SuperSpeed USB Device Capability:  
> bLength 10  
> bDescriptorType 16  
> bDevCapabilityType 3  
> bmAttributes 0x02  
> wSpeedsSupported 0x0008  
> Device can operate at SuperSpeed (5Gbps)  
> bFunctionalitySupport 0  
> Lowest fully-functional device speed is Low Speed (1Mbps)  
> bU1DevExitLat 3 micro seconds  
> bU2DevExitLat 2815 micro seconds  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 0 Full speed (or root) hub  
> bMaxPacketSize0 64  
> idVendor 0x1d6b Linux Foundation  
> idProduct 0x0002 2.0 root hub  
> bcdDevice 3.00  
> iManufacturer 3 Linux 3.0.76-0.11-default ehci\_hcd  
> iProduct 2 EHCI Host Controller  
> iSerial 1 0000:00:1a.0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0004 1x 4 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 9  
> bDescriptorType 41  
> nNbrPorts 2  
> wHubCharacteristic 0x000a  
> No power switching (usb 1.0)  
> Per-port overcurrent protection  
> bPwrOn2PwrGood 10 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00  
> PortPwrCtrlMask 0xff  
> Hub Port Status:  
> Port 1: 0000.0507 highspeed power suspend enable connect  
> Port 2: 0000.0100 power  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 0 Full speed (or root) hub  
> bMaxPacketSize0 64  
> idVendor 0x1d6b Linux Foundation  
> idProduct 0x0002 2.0 root hub  
> bcdDevice 3.00  
> iManufacturer 3 Linux 3.0.76-0.11-default ehci\_hcd  
> iProduct 2 EHCI Host Controller  
> iSerial 1 0000:00:1d.0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0004 1x 4 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 9  
> bDescriptorType 41  
> nNbrPorts 2  
> wHubCharacteristic 0x000a  
> No power switching (usb 1.0)  
> Per-port overcurrent protection  
> bPwrOn2PwrGood 10 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00  
> PortPwrCtrlMask 0xff  
> Hub Port Status:  
> Port 1: 0000.0503 highspeed power enable connect  
> Port 2: 0000.0100 power  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 001 Device 002: ID 21d1:000a  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 1 Single TT  
> bMaxPacketSize0 64  
> idVendor 0x21d1  
> idProduct 0x000a  
> bcdDevice 0.01  
> iManufacturer 1 Adventiq  
> iProduct 2 KVM-via-IP Extender  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0002 1x 2 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 11  
> bDescriptorType 41  
> nNbrPorts 13  
> wHubCharacteristic 0x0000  
> Ganged power switching  
> Ganged overcurrent protection  
> TT think time 8 FS bits  
> bPwrOn2PwrGood 50 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00 0x00  
> PortPwrCtrlMask 0xff 0xff  
> Hub Port Status:  
> Port 1: 0000.0103 power enable connect  
> Port 2: 0000.0103 power enable connect  
> Port 3: 0000.0100 power  
> Port 4: 0000.0100 power  
> Port 5: 0000.0100 power  
> Port 6: 0000.0100 power  
> Port 7: 0000.0103 power enable connect  
> Port 8: 0000.0100 power  
> Port 9: 0000.0100 power  
> Port 10: 0000.0100 power  
> Port 11: 0000.0100 power  
> Port 12: 0000.0100 power  
> Port 13: 0000.0100 power  
> Device Qualifier (for other device speed):  
> bLength 10  
> bDescriptorType 6  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 0 Full speed (or root) hub  
> bMaxPacketSize0 64  
> bNumConfigurations 1  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 1 Single TT  
> bMaxPacketSize0 64  
> idVendor 0x8087 Intel Corp.  
> idProduct 0x0024 Integrated Rate Matching Hub  
> bcdDevice 0.00  
> iManufacturer 0  
> iProduct 0  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0001 1x 1 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 9  
> bDescriptorType 41  
> nNbrPorts 6  
> wHubCharacteristic 0x0009  
> Per-port power switching  
> Per-port overcurrent protection  
> TT think time 8 FS bits  
> bPwrOn2PwrGood 50 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00  
> PortPwrCtrlMask 0xff  
> Hub Port Status:  
> Port 1: 0000.0100 power  
> Port 2: 0000.0100 power  
> Port 3: 0000.0100 power  
> Port 4: 0000.0100 power  
> Port 5: 0000.0100 power  
> Port 6: 0000.0100 power  
> Device Qualifier (for other device speed):  
> bLength 10  
> bDescriptorType 6  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 0 Full speed (or root) hub  
> bMaxPacketSize0 64  
> bNumConfigurations 1  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 1 Single TT  
> bMaxPacketSize0 64  
> idVendor 0x8087 Intel Corp.  
> idProduct 0x0024 Integrated Rate Matching Hub  
> bcdDevice 0.00  
> iManufacturer 0  
> iProduct 0  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 25  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xe0  
> Self Powered  
> Remote Wakeup  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 9 Hub  
> bInterfaceSubClass 0 Unused  
> bInterfaceProtocol 0 Full speed (or root) hub  
> iInterface 0  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0002 1x 2 bytes  
> bInterval 12  
> Hub Descriptor:  
> bLength 11  
> bDescriptorType 41  
> nNbrPorts 8  
> wHubCharacteristic 0x0009  
> Per-port power switching  
> Per-port overcurrent protection  
> TT think time 8 FS bits  
> bPwrOn2PwrGood 50 \* 2 milli seconds  
> bHubContrCurrent 0 milli Ampere  
> DeviceRemovable 0x00 0x00  
> PortPwrCtrlMask 0xff 0xff  
> Hub Port Status:  
> Port 1: 0000.0100 power  
> Port 2: 0000.0100 power  
> Port 3: 0000.0100 power  
> Port 4: 0000.0100 power  
> Port 5: 0000.0100 power  
> Port 6: 0000.0303 lowspeed power enable connect  
> Port 7: 0000.0100 power  
> Port 8: 0000.0100 power  
> Device Qualifier (for other device speed):  
> bLength 10  
> bDescriptorType 6  
> bcdUSB 2.00  
> bDeviceClass 9 Hub  
> bDeviceSubClass 0 Unused  
> bDeviceProtocol 0 Full speed (or root) hub  
> bMaxPacketSize0 64  
> bNumConfigurations 1  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 001 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 0 (Defined at Interface level)  
> bDeviceSubClass 0  
> bDeviceProtocol 0  
> bMaxPacketSize0 8  
> idVendor 0x03f0 Hewlett-Packard  
> idProduct 0x0024 KU-0316 Keyboard  
> bcdDevice 1.30  
> iManufacturer 1 CHICONY  
> iProduct 2 HP Basic USB Keyboard  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 34  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xa0  
> (Bus Powered)  
> Remote Wakeup  
> MaxPower 100mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 1 Boot Interface Subclass  
> bInterfaceProtocol 1 Keyboard  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 1.11  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 65  
> Report Descriptors:  
> \*\* UNAVAILABLE \*\*  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0008 1x 8 bytes  
> bInterval 10  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 001 Device 004: ID 056a:0303 Wacom Co., Ltd  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 0 (Defined at Interface level)  
> bDeviceSubClass 0  
> bDeviceProtocol 0  
> bMaxPacketSize0 64  
> idVendor 0x056a Wacom Co., Ltd  
> idProduct 0x0303  
> bcdDevice 1.00  
> iManufacturer 1 Wacom Co.,Ltd.  
> iProduct 2 Intuos PTM  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 84  
> bNumInterfaces 3  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0x80  
> (Bus Powered)  
> MaxPower 498mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 0 No Subclass  
> bInterfaceProtocol 0 None  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 1.10  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 192  
> Report Descriptors:  
> \*\* UNAVAILABLE \*\*  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0010 1x 16 bytes  
> bInterval 2  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 1  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 0 No Subclass  
> bInterfaceProtocol 0 None  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 1.10  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 38  
> Report Descriptors:  
> \*\* UNAVAILABLE \*\*  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x82 EP 2 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0040 1x 64 bytes  
> bInterval 2  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 2  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 1 Boot Interface Subclass  
> bInterfaceProtocol 2 Mouse  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 1.10  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 52  
> Report Descriptor: (length is 52)  
> Item(Global): Usage Page, data= [0x01] 1  
> Generic Desktop Controls  
> Item(Local ): Usage, data= [0x02] 2  
> Mouse  
> Item(Main ): Collection, data= [0x01] 1  
> Application  
> Item(Global): Report ID, data= [0x01] 1  
> Item(Local ): Usage, data= [0x01] 1  
> Pointer  
> Item(Main ): Collection, data= [0x00] 0  
> Physical  
> Item(Global): Usage Page, data= [0x09] 9  
> Buttons  
> Item(Local ): Usage Minimum, data= [0x01] 1  
> Button 1 (Primary)  
> Item(Local ): Usage Maximum, data= [0x05] 5  
> Button 5  
> Item(Global): Logical Minimum, data= [0x00] 0  
> Item(Global): Logical Maximum, data= [0x01] 1  
> Item(Global): Report Count, data= [0x05] 5  
> Item(Global): Report Size, data= [0x01] 1  
> Item(Main ): Input, data= [0x02] 2  
> Data Variable Absolute No\_Wrap Linear  
> Preferred\_State No\_Null\_Position Non\_Volatile Bitfield  
> Item(Global): Report Count, data= [0x01] 1  
> Item(Global): Report Size, data= [0x03] 3  
> Item(Main ): Input, data= [0x01] 1  
> Constant Array Absolute No\_Wrap Linear  
> Preferred\_State No\_Null\_Position Non\_Volatile Bitfield  
> Item(Global): Usage Page, data= [0x01] 1  
> Generic Desktop Controls  
> Item(Local ): Usage, data= [0x30] 48  
> Direction-X  
> Item(Local ): Usage, data= [0x31] 49  
> Direction-Y  
> Item(Global): Logical Minimum, data= [0x81] 129  
> Item(Global): Logical Maximum, data= [0x7f] 127  
> Item(Global): Report Size, data= [0x08] 8  
> Item(Global): Report Count, data= [0x02] 2  
> Item(Main ): Input, data= [0x06] 6  
> Data Variable Relative No\_Wrap Linear  
> Preferred\_State No\_Null\_Position Non\_Volatile Bitfield  
> Item(Main ): End Collection, data=none  
> Item(Main ): End Collection, data=none  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x83 EP 3 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0040 1x 64 bytes  
> bInterval 2  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 001 Device 005: ID 21d1:000b  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 2.00  
> bDeviceClass 0 (Defined at Interface level)  
> bDeviceSubClass 0  
> bDeviceProtocol 0  
> bMaxPacketSize0 64  
> idVendor 0x21d1  
> idProduct 0x000b  
> bcdDevice 0.01  
> iManufacturer 1 Adventiq  
> iProduct 2 Virtual Keyboard  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 34  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xc0  
> Self Powered  
> MaxPower 0mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 1 Boot Interface Subclass  
> bInterfaceProtocol 1 Keyboard  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 11.01  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 63  
> Report Descriptors:  
> \*\* UNAVAILABLE \*\*  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0010 1x 16 bytes  
> bInterval 10  
> Device Status: 0x0001  
> Self Powered
> 
> Bus 004 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard  
> Device Descriptor:  
> bLength 18  
> bDescriptorType 1  
> bcdUSB 1.10  
> bDeviceClass 0 (Defined at Interface level)  
> bDeviceSubClass 0  
> bDeviceProtocol 0  
> bMaxPacketSize0 8  
> idVendor 0x03f0 Hewlett-Packard  
> idProduct 0x0024 KU-0316 Keyboard  
> bcdDevice 3.00  
> iManufacturer 1 CHICONY  
> iProduct 2 HP Basic USB Keyboard  
> iSerial 0  
> bNumConfigurations 1  
> Configuration Descriptor:  
> bLength 9  
> bDescriptorType 2  
> wTotalLength 34  
> bNumInterfaces 1  
> bConfigurationValue 1  
> iConfiguration 0  
> bmAttributes 0xa0  
> (Bus Powered)  
> Remote Wakeup  
> MaxPower 100mA  
> Interface Descriptor:  
> bLength 9  
> bDescriptorType 4  
> bInterfaceNumber 0  
> bAlternateSetting 0  
> bNumEndpoints 1  
> bInterfaceClass 3 Human Interface Device  
> bInterfaceSubClass 1 Boot Interface Subclass  
> bInterfaceProtocol 1 Keyboard  
> iInterface 0  
> HID Device Descriptor:  
> bLength 9  
> bDescriptorType 33  
> bcdHID 1.10  
> bCountryCode 0 Not supported  
> bNumDescriptors 1  
> bDescriptorType 34 Report  
> wDescriptorLength 65  
> Report Descriptors:  
> \*\* UNAVAILABLE \*\*  
> Endpoint Descriptor:  
> bLength 7  
> bDescriptorType 5  
> bEndpointAddress 0x81 EP 1 IN  
> bmAttributes 3  
> Transfer Type Interrupt  
> Synch Type None  
> Usage Type Data  
> wMaxPacketSize 0x0008 1x 8 bytes  
> bInterval 10  
> Device Status: 0x0000  
> (Bus Powered)  
> mistika:~ #
