# ZFCP SCSi setup

**URL:** <https://forums.suse.com/t/zfcp-scsi-setup/28788>\
**Category:** SLES Hardware\
**Created:** [October 14, 2016, 9:17pm UTC](https://forums.suse.com/t/zfcp-scsi-setup/28788 "2016-10-14T21:17:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikenash](https://avatars.discourse-cdn.com/v4/letter/m/977dab/32.png) [@mikenash](https://forums.suse.com/u/mikenash)\
**Post date:** [October 14, 2016, 9:17pm UTC](https://forums.suse.com/t/zfcp-scsi-setup/28788/1 "2016-10-14T21:17:30Z")

</div>

Greetings, I have been given some quick notes on how to make this work but no explanations. They were for a SLES11 SP2 Enterprise system from a few years ago. I am in the process of obtaining a system to perform this work but I would like some more information from others with experience in this area.  
Instructions:  
modprobe scsi\_dh\_alua  
mdprobe scsi\_dh\_rdac  
modprobe scsi\_dh\_hp\_sw  
modprobe scsi\_dh\_emc  
modprobe zfcp  
modprobe sd\_mod  
cd /sys/bus/ccw/drivers  
cd zfcp  
ls  
cd 0.0.b111  
ls  
cat online  
cd …  
echo 1 \> 0.0.b111/online  
cat 0.0.b111/peer\_wwpn  
cat 0.0.b111/peer\_wwnn  
yast → hardware → zfcp → add → ( Get WWPNs & Get LUNs )  
cat /proc/scsi/scsi  
yast  
lszfcp -D  
lsscsi

---

<div class="post-metadata">

**Author:** ![Automatic\_Reply](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Automatic\_Reply](https://forums.suse.com/u/Automatic_Reply)\
**Post date:** [October 19, 2016, 7:30am UTC](https://forums.suse.com/t/zfcp-scsi-setup/28788/2 "2016-10-19T07:30:31Z")

</div>

mikenash,

It appears that in the past few days you have not received a response to your  
posting. That concerns us, and has triggered this automated reply.

These forums are peer-to-peer, best effort, volunteer run and that if your issue  
is urgent or not getting a response, you might try one of the following options:

- Visit [http://www.suse.com/support](http://www.suse.com/support) and search the knowledgebase and/or check all  
the other support options available.
- Open a service request: [https://www.suse.com/support](https://www.suse.com/support)
- You could also try posting your message again. Make sure it is posted in the  
correct newsgroup. ([http://forums.suse.com](http://forums.suse.com))

Be sure to read the forum FAQ about what to expect in the way of responses:  
[http://forums.suse.com/faq.php](http://forums.suse.com/faq.php)

If this is a reply to a duplicate posting or otherwise posted in error, please  
ignore and accept our apologies and rest assured we will issue a stern reprimand  
to our posting bot…

Good luck!

Your SUSE Forums Team  
[http://forums.suse.com](http://forums.suse.com)